Home
>
Panasonic
>
Recorder
>
Panasonic Network Camera Recorder Single Camera Version Operating Instructions
Panasonic Network Camera Recorder Single Camera Version Operating Instructions
Have a look at the manual Panasonic Network Camera Recorder Single Camera Version Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
Operating Instructions
56
2.7.3 Timer Recording
You can specify the day of the week and period of time for recording.
1.Select a camera preview on the camera list.
Selected camera is displayed in a blue frame (see page 66).
2.Select [Timer] [Create New Timer] on the menu bar.
The create new timer page is displayed.
Click [Create New Timer] on the menu displayed by right-clicking the timer
list page (see page 47).
3.Set the parameters, and click [OK].
The timer is displayed on the timer list page...](http://img.usermanuals.tech/thumb/58/74605/w64_bb-hnp11_network_camera_recorder_d-55.png "Page 56
Operating Instructions
56
2.7.3 Timer Recording
You can specify the day of the week and period of time for recording.
1.Select a camera preview on the camera list.
Selected camera is displayed in a blue frame (see page 66).
2.Select [Timer] [Create New Timer] on the menu bar.
The create new timer page is displayed.
Click [Create New Timer] on the menu displayed by right-clicking the timer
list page (see page 47).
3.Set the parameters, and click [OK].
The timer is displayed on the timer list page...")
![Page 57
Operating Instructions
57
If you change default by checking [Set to Default] and clicking [OK], the current
settings become as a default.
If you click [Return to Default], the settings return to a default.
Notes
If you click Record Stop button during timer recording, timer recording is
not canceled. To cancel it, disable the timer on the timer list page (see
page 58).
If you record images all day, the image is recorded from the start time to
end time. If you set time period over midnight, the...](http://img.usermanuals.tech/thumb/58/74605/w64_bb-hnp11_network_camera_recorder_d-56.png "Page 57
Operating Instructions
57
If you change default by checking [Set to Default] and clicking [OK], the current
settings become as a default.
If you click [Return to Default], the settings return to a default.
Notes
If you click Record Stop button during timer recording, timer recording is
not canceled. To cancel it, disable the timer on the timer list page (see
page 58).
If you record images all day, the image is recorded from the start time to
end time. If you set time period over midnight, the...")
![Page 58
Operating Instructions
58
If network is disconnected during recording, recording is paused with the
indictor on (see page 66). When network is connected, recording starts
again.
Editing Timer Settings
1.
Select a camera preview on the camera list, and select the timer to change.
2.Change parameters at [Timer] on the menu bar.
See page 56 for details about parameters.
Click [Edit Current Camera] or double-click the timer to display the setting
page.
Enabling, Disabling or Deleting Timers
If you...](http://img.usermanuals.tech/thumb/58/74605/w64_bb-hnp11_network_camera_recorder_d-57.png "Page 58
Operating Instructions
58
If network is disconnected during recording, recording is paused with the
indictor on (see page 66). When network is connected, recording starts
again.
Editing Timer Settings
1.
Select a camera preview on the camera list, and select the timer to change.
2.Change parameters at [Timer] on the menu bar.
See page 56 for details about parameters.
Click [Edit Current Camera] or double-click the timer to display the setting
page.
Enabling, Disabling or Deleting Timers
If you...")
![Page 60
Operating Instructions
60
Note
If you click [Refresh] on the menu displayed by right-clicking the recorded
image list, the recorded image list is refreshed.
3.Play recorded images on the screen.
Plays images.
Stops playing images.
Pauses playback. The button is changed to during pause.
To start playing again, click . If the camera does not support audio, is displayed.
Displays the recorded date and
time. Time is displayed with a
millisecond.
Screen
Jump Button
Displays the time period button...](http://img.usermanuals.tech/thumb/58/74605/w64_bb-hnp11_network_camera_recorder_d-59.png "Page 60
Operating Instructions
60
Note
If you click [Refresh] on the menu displayed by right-clicking the recorded
image list, the recorded image list is refreshed.
3.Play recorded images on the screen.
Plays images.
Stops playing images.
Pauses playback. The button is changed to during pause.
To start playing again, click . If the camera does not support audio, is displayed.
Displays the recorded date and
time. Time is displayed with a
millisecond.
Screen
Jump Button
Displays the time period button...")
![Page 63
Operating Instructions
63
2.8.2 Searching the Recorded Images
You can search images by using recorded time or keyword.
1.Select a camera preview on the camera list.
Selected camera is displayed in a blue frame (see page 66).
2.Select [Edit] [Search] on the menu bar.
Clicking [Search] tab displays the search page.
The search page is displayed.
Double-clicking
or clicking displays the
search page on another
window.
Specifies the time period to
search images (see page 65).
Specifies the day of...](http://img.usermanuals.tech/thumb/58/74605/w64_bb-hnp11_network_camera_recorder_d-62.png "Page 63
Operating Instructions
63
2.8.2 Searching the Recorded Images
You can search images by using recorded time or keyword.
1.Select a camera preview on the camera list.
Selected camera is displayed in a blue frame (see page 66).
2.Select [Edit] [Search] on the menu bar.
Clicking [Search] tab displays the search page.
The search page is displayed.
Double-clicking
or clicking displays the
search page on another
window.
Specifies the time period to
search images (see page 65).
Specifies the day of...")
![Page 64
Operating Instructions
64
3.Set search conditions, and click [Search Operation].
The search result is displayed.
Notes
If you set the time period, this software search images by the
condition including the time period.
Conditions are added like A and B. For example, if you set [Tuesday]
and [Current Recorded Image], this software searches images
recorded on Tuesday.
Clicking deletes all search results.
Searched images can be played on the screen (see page 59).
The images that are being...](http://img.usermanuals.tech/thumb/58/74605/w64_bb-hnp11_network_camera_recorder_d-63.png "Page 64
Operating Instructions
64
3.Set search conditions, and click [Search Operation].
The search result is displayed.
Notes
If you set the time period, this software search images by the
condition including the time period.
Conditions are added like A and B. For example, if you set [Tuesday]
and [Current Recorded Image], this software searches images
recorded on Tuesday.
Clicking deletes all search results.
Searched images can be played on the screen (see page 59).
The images that are being...")
![Page 66
Operating Instructions
66
2.9 Using Camera List
The camera list displays registered camera previews.
The selected camera is displayed in a blue frame.
If you select multiple cameras, select them while pressing [Ctrl] key on the
keyboard.
The image of the selected camera is displayed
on the monitoring page.
Indicator
: Monitoring
(Left: Green)
: Recording
(Left: Green, Center: Red)
: Motion detection recording
(Left: Green, Center and Right:
Red)
: Stand-by state for motion
detection recording...](http://img.usermanuals.tech/thumb/58/74605/w64_bb-hnp11_network_camera_recorder_d-65.png "Page 66
Operating Instructions
66
2.9 Using Camera List
The camera list displays registered camera previews.
The selected camera is displayed in a blue frame.
If you select multiple cameras, select them while pressing [Ctrl] key on the
keyboard.
The image of the selected camera is displayed
on the monitoring page.
Indicator
: Monitoring
(Left: Green)
: Recording
(Left: Green, Center: Red)
: Motion detection recording
(Left: Green, Center and Right:
Red)
: Stand-by state for motion
detection recording...")
Operating Instructions 61 Notes Sometimes Audio may be interrupted, or image may be paused. If you monitor the camera with audio feature, audio may be interrupted due to your PC performance or network environment. In this case, lower the max. bandwidth setting on the Network page of the camera. If you minimize the application during playback, playback will be paused, and if you change the page to the monitoring, recorded image or timer list page, playback will be stopped. Recorded images can be played in the following ways Double-clicking the recorded image. Select [Playback] on the menu displayed by right-clicking the recorded image list. Select [Playback] [Start] on the menu bar. Note Pause, Stop, Next image or Previous image can be operated on the menu bar.
Operating Instructions 62 Speed and volume can be adjusted in the following ways. Notes The changed playback speed is disabled by selecting another camera preview or closing this software. Audio cannot be adjusted. Audio can be played only at the medium speed (default).Adjust the slider bar displayed by right-clicking volume button. If the camera does not support audio, the button is not displayed. Adjust the slider bar displayed by right-clicking playback button.
Operating Instructions 63 2.8.2 Searching the Recorded Images You can search images by using recorded time or keyword. 1.Select a camera preview on the camera list. Selected camera is displayed in a blue frame (see page 66). 2.Select [Edit] [Search] on the menu bar. Clicking [Search] tab displays the search page. The search page is displayed. Double-clicking or clicking displays the search page on another window. Specifies the time period to search images (see page 65). Specifies the day of the week. To search in the day of the week, check it. Specifies the keyword you set. Specifies searching folder, recording status and recording method. Searched Target: Select destination folder or backup folder to search images. Recorded Status: Select recording status from all, normal recording*1 or motion detection recording*2. Recording Method: Select recording method from all, manual, or timer. * 1: Normal recording means the images recorded by button or recorded all the set time period by timer recording. * 2: Motion detection recording means the images recorded by button or recorded only when motion is detected by timer recording.
Operating Instructions 64 3.Set search conditions, and click [Search Operation]. The search result is displayed. Notes If you set the time period, this software search images by the condition including the time period. Conditions are added like A and B. For example, if you set [Tuesday] and [Current Recorded Image], this software searches images recorded on Tuesday. Clicking deletes all search results. Searched images can be played on the screen (see page 59). The images that are being backed up cannot be the target for the search.The search condition is displayed. The search result is displayed. If the number of recorded images exceeds 100, [< 100] and [100> ] are displayed. The image before or after 100th can be displayed.
Operating Instructions 65 Search Time Period To specify the search time period, check the box and specify the time period. Time period can be set by directly entering date and time or selecting it from the calendar. Entering Date and Time Selecting Date and Time from Calendar Note Second cannot be set in the time period.Directly enter date and time. If you do not set it, this software search images after the set time. If you click it, the calendar is displayed. Select the date from the calendar. Displays the previous month. Displays the next month.
Operating Instructions 66 2.9 Using Camera List The camera list displays registered camera previews. The selected camera is displayed in a blue frame. If you select multiple cameras, select them while pressing [Ctrl] key on the keyboard. The image of the selected camera is displayed on the monitoring page. Indicator : Monitoring (Left: Green) : Recording (Left: Green, Center: Red) : Motion detection recording (Left: Green, Center and Right: Red) : Stand-by state for motion detection recording (Left: Green, Right: Red) If you select a camera preview and right-click it, menu is displayed. The camera can be set from the menu. Create New Camera: Displays the create new camera page (see page 30). Image Size: Changes camera preview sizes (320 x 240, 240 x 180, 160 x 120, 120 x 90 (default), 80 x 60, 60 x 45) Edit Current Camera: Displays the camera information page (see page 38). Enable:Enables cameras. Disable: Disables cameras. Delete: Deletes cameras.
Operating Instructions 67 Notes Double-clicking or clicking displays the camera list on another window (see page 39). If the camera is not operated for 15 seconds, the indicator of monitoring turns off.
Operating Instructions 68 2.10 Enabling or Disabling the Cameras You can enable or disable cameras. 1.Select the camera to enable or disable, and select [Enable] or [Disable] on the menu bar [Camera] [Enable or Disable Cameras]. You can enable or disable cameras from the menu displayed by right- clicking camera list (see page 66). You can enable or disable multiple cameras. If you select multiple cameras, select cameras while pressing [Ctrl] key on the keyboard. To Disable Cameras The following window is displayed. Click [OK] to disable it. If you disable the camera, the monitoring page is not displayed. Manual recording and timer recording cannot be operated. Disabling the Camera01 camera Notes You can play images recorded by the disabled cameras. If you disable the camera, manual recording and timer recording is stopped. If you enable the camera, timer recording starts again.
Operating Instructions 69 2.11 Deleting the Registered Cameras You can delete registered cameras. Note If you delete cameras, the recorded images are deleted with the cameras. If you keep recorded images, disable the cameras (see page 68). 1.Select the camera to delete, and select [Camera] [Delete] on the menu bar. You can delete cameras from the menu displayed by right-clicking camera list (see page 66). You can delete multiple cameras. If you select multiple cameras, select cameras while pressing [Ctrl] key on the keyboard. Confirmation window is displayed. 2.Click [Delete]. The camera and recorded images are deleted. Clicking [Disable] disables the camera (see page 68).
Operating Instructions 70 2.12 Converting the Recorded Images 2.12.1 Converting the Recorded Images to JPEG files 1.Select a camera preview on the camera list. Selected camera is displayed in a blue frame (see page 66). 2.Select recorded images to convert to JPEG files on the recorded image page. The selected recorded image is displayed on the screen. 3.Select [Tools] [JPEG Conversion] on the menu bar. You can select [JPEG Conversion] from the menu displayed by right- clicking the recorded image list. 4.Specify the start time and end time. 5.Set the interval to convert. 6.Click [OK]. The folder selection window is displayed (see page 25).