Panasonic Network Camera Recorder Single Camera Version Operating Instructions

							PSQX3576XA    KK1107RM0 
						

							Additional Feature table
The following features are added to this software. Read both Operating Instructions 
manuals before starting to use the product.
Additional Features Contents Page
Menu items are added.[Alarm/Sensor Recording] on the 
[Record] menu bar is added.page 4
[To Next Selected Image] and [To 
Previous Selected Image] on the 
[Playback] menu bar are added.page 4
[Select All] on the [Recorded Images] 
menu bar is added.page 4
[Open Operating Instructions 
(Additional Features)] on the [Help] 
menu bar is added.page 4
The toolbar button is added.
 (Start Alarm Recording button) 
on the toolbar is added.page 5
The indicator is added.The indicator of Alarm Recording is 
added.page 5
Operating Instructions (Additional Features)
Single Camera Version
Network Camera Recorder 
						

							Operating Instructions (Additional Features)
2
The functions are added on the 
Recorded Image screen. and   are added on the 
Recorded Image screenpage 6
[Select All] is added on the menu 
displayed by right-clicking on the 
recorded image list.page 6
[Alarm/Sensor Recording] tab is 
added.page 6
The function to play back is added. page 6
The items are added on Camera 
Registration Information 
window.[Alarm1/Sensor] and [Alarm2] tabs 
are added.page 7
The items are added on Timer 
Registration Information 
window.[Alarm1/Sensor] and [Alarm2] are 
added on the Recording Method of 
Timer Registration Information 
window.page 8
Search items are added.[Select Folder] is added in the 
Searched Target of Search window.page 9
[Alarm Recording] is added in the 
Recorded Status of Search window.page 9
The function to cancel searching is 
added.page 9
Specifying the network drive.A network drive can be specified to 
browse a folder.page 10
Not to start this software when 
booting up the PCIt is possible to start or not to start this 
software when booting up the PC.page 10
Converting the recorded images 
to MPEG files.This software can convert the 
recorded images to MPEG files.page 11
The error messages are added.The error messages are added on the 
Error Message List.page 13 
—
page 14 Additional Features Contents Page 
						

							Operating Instructions (Additional Features)
3
Trademarks
 Windows and Windows Media are either registered trademarks or trademarks 
of Microsoft Corporation in the United States and/or other countries.
 Screen shots reprinted with permission from Microsoft Corporation.
 All other trademarks identified herein are the property of their respective 
owners.
 This software is based in part on the work of the Independent JPEG Group. 
						

							Operating Instructions (Additional Features)
4
Menu items are added
 [Record] [Alarm/Sensor Recording] on the menu bar is added.
Start the Alarm/Sensor Recording selected on the Camera Registration 
Information window.
Note
This [Alarm/Sensor Recording] function is available when [Set the Alarm1 
(Sensor, Alarm2) recording condition.] is checked on the [Alarm1/Sensor] 
tab and [Alarm2] tab of Camera Registration Information window.
 [To Next Selected Image] and [To Previous Selected Image] on the [Playback] 
menu bar are added.
This function is used when multiple images are selected on the recorded 
image list.
Note
[To Next Selected Image] and [To Previous Selected Image] are available 
when multiple images are selected on the recorded image list.
 [Select All] on the [Recorded Images] menu bar is added. 
						

							Operating Instructions (Additional Features)
5
 [Open Additional Operating Instructions] on the [Help] menu bar is added.
This Operating Instructions (Additional Features) will be opened.
The toolbar button is added
  on the toolbar button is added.
Start the Alarm/Sensor Recording selected on the Camera Registration 
Information window.
Note
This [Alarm/Sensor Recording] function is available when [Set the Alarm1 
(Sensor, Alarm2) recording condition.] is checked on the [Alarm1/Sensor] 
tab and [Alarm2] tab of Camera Registration Information window.
The indicator is added
 The indicator of Alarm Recording is added.
GreenRedRed: Alarm/Sensor Recording 
						

							Operating Instructions (Additional Features)
6
The functions are added on the Recorded Image screen
  and   are added on the Recorded Image screen.
Previous Selected Image and Next Selected Image are displayed when 
multiple recorded images are selected.
 [Select All] is added on the menu displayed by right-clicking on the recorded 
image list.
All images are selected on the recorded image list.
 [Alarm/Sensor Recording] tab is added.
The images recorded by Alarm/Sensor Recording are displayed.
The function to play back is added
There are two methods for playing back recorded images on the recorded image 
list.
The selected images are played chronologically.
 Selecting [Playback] [Start] on the menu bar
 Clicking  
						

							Operating Instructions (Additional Features)
7
Alarm/Sensor Recording is added
[Alarm1/Sensor] and [Alarm2] are added on the Camera Registration Information 
window.
Alarm/Sensor Recording is available with using the alarm/sensor function on the 
cameras.
(Only alarm/sensor-supported cameras can perform Alarm/Sensor Recording.)
Setting Description
Set the [Alarm1/
Sensor/Alarm2] 
recording conditionCheck the box to record images while detecting the 
alarm signal of camera.
Note
Select [Sensor] for sensor-supported cameras.
Alarm enable condition Specify Alarm enable condition ([Rising : GND to Open 
(High).] or [Falling : Open (High) to GND.])
Note
 Specify the alarm enable condition after 
checking the alarm’s specification.
 [Rising : GND to Open (High).] is selected 
automatically when select [Sensor].
Before Alarm1/Sensor/
Alarm2 is detected :
After Alarm1/Sensor/
Alarm2 is detected :Specify the time before Alarm1/Sensor/Alarm2 is 
detected or after Alarm1/Sensor/Alarm2 is detected. 
						

							Operating Instructions (Additional Features)
8
Note
Alarm/Sensor Recording is started by clicking [Record] [Alarm/Sensor 
Recording] on the menu bar or [Start Alarm Recording] on the toolbar button.
The items are added on Timer Registration Information window
[Alarm1/Sensor] and [Alarm2] are added on the Recording Method of Timer 
Registration Information window.
Note
This [Alarm/Sensor Recording] function is available when [Alarm1/Sensor] 
[Alarm2] tab [Set the Alarm1/Sensor/Alarm2] is checked on Camera 
Registration Information window.
(See page 7)
Detecting
Alarm/Sensor The time before Alarm/
Sensor is detected
If the recording time is overlapped with other, their images will be saved as one image.
The time after Alarm/
Sensor is detected
Detecting
Alarm/Sensor The time before Alarm/
Sensor is detected
The time after Alarm/
Sensor is detected 
						

							Operating Instructions (Additional Features)
9
Search items are added
[Select Folder] is added in the Searched Target, and [Alarm Recording] is added in 
the Recorded Status.
It is possible to specify any backup folders.
The next message is displayed during searching.
Click   to stop searching.
[Browse] is available to select 
[Select Folder]. Click the 
[Browse] button to browse the 
folder.