Panasonic Network Camera Kx Hcm8 Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 11
1.1.3 Authentication—System Security Feature
Authentication window requires you to enter the administrator/general user ID 
and password for security. Password security can prevent unregistered users/
intruders from accessing your image from their web browsers. Authentication 
windows are not displayed in the default. Refer to page 56 for setting up 
Authentication window, the administrator ID and the password. Refer to page 58 
for setting up the general user ID and the password.
Authentication window 
						

							Operating Instructions
12
1.2 Included Accessories
The following items are provided with Network Camera. Additional pieces can be 
ordered by calling 1-800-332-5368.
Notes
If any items are missing, contact the dealer immediately.
The order numbers listed above are subject to change without notice.
Save the original carton and packing materials for future shipping and 
transportation of the unit. AC Adaptor — 1 pc.
Order No. PQLV10YFlexible Stand — 1 pc.
Order No. PSKL1020Z
Screws
— 3 pcs.
Order No. PQHE5004ZSetup CD-ROM
— 1 pc.
Order No. PSQX2904ZCDRear Mounting Adaptor
— 1 pc.
Order No. PSYLHCM8M 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 13
Setup CD-ROM
The setup program simplifies Network Camera installation. Adobe
® Acrobat® 
Reader 4.05 or later enables you to see the Operating Instructions on the Setup 
CD-ROM. If Adobe Acrobat Reader is not installed on the PC, double-click 
ar405eng.exe. Refer to ReadmeEng.txt for the directory and file structure of 
the Setup CD-ROM.
Notes
Do not scratch, smudge, write or label either surfaces of the Setup CD-
ROM. Setup CD-ROM may have a scratch on the surface.
Do not leave the Setup CD-ROM in direct sunlight, near a heat source or 
in a hot automobile as the Setup CD-ROM may become unreadable.
Do not use chemicals or cleanser to clean the Setup CD-ROM as the Setup 
CD-ROM may become unreadable. 
						

							Operating Instructions
14
1.3 Camera Feature Locations
1.3.1 Front View
Power Indicator
Power Indicator can be controlled on Indicator Control window on page 79. 
Power Indicator blinks in the following situations.
During the Update Firmware.
During initializing after pushing CLEAR SETTING button.
During getting the IP address from the DHCP server.
Because of the internal failure of Network Camera. Refer to page 107.
Fixed Focus Lens
Network Camera uses Fixed Focus Lens. Minimum distance between Network 
Camera and object is 1 meter (40 inches).
Note
Do not touch the Fixed Focus Lens. Touching it may leave a fingerprint and can 
cause the image to be out of focus. This can also remove the protective coating 
from the Fixed Focus Lens.
Corresponding to the attachment lens (customer provided)
The Network Camera’s lens is threaded to accept optional diopter lens (customer 
provided), similar to those used with camcorders. Panasonic does not offer any at 
this time. If the lens you choose is slightly larger than 30.5 mm, adaptor rings can 
be purchased from most photographic supply dealers. The adaptor should be 
selected to convert 30.5 mm to the diameter of the lens you choose.Power Indicator
(Refer to page 79 for the setup.)
Fixed Focus Lens
1 m (40 inches) – Infinity
Attachment Lens (30.5 mm)
(customer provided)
Turn the attachment lens till it stops. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 15
1.3.2 Rear View
Ethernet Indicator
Ethernet Indicator turns on when the network is active. It flickers when Network 
Camera is sending and receiving the data.
1.3.3 Bottom View
I/O Connector
(Refer to page 91.)
Ethernet port
(RJ-45)
(Refer to page 20.)
DC IN jack
(Refer to page 20.)
Ethernet Indicator
(Refer to page 20.)
Hook for AC
adaptor cable
(Refer to page 20.)CLEAR SETTING button
(Refer to page 97.)
MAC Address and Serial 
Number are indicated on 
the label. Record both of 
them on Network Camera 
Memo on page 3. They are 
indispensable for setting 
network parameters after 
mounting Network Camera 
and for future customer 
servicing.
(Refer to page 29.)
Used for mounting the 
unit with Rear Mounting 
Adaptor.
(Refer to page 89.)
Tripod Mounting
Hole
(Refer to page 87.) 
						

							Operating Instructions
16
Section 2
Network Camera Setup 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 17
2.1 Installation Procedure
Select the Network Camera configuration type. (Page 18—Page 19)
Connect Network Camera for installation. (Page 20)
Prepare the network parameters for Network Camera. (Page 21—Page 22)
Check the proxy server setting. (Page 26—Page 27)
Set up Network Camera with Setup CD-ROM. (Page 28—Page 31)
Confirm the Network Camera Access from the Internet. (Page 32—Page 33)
Mount Network Camera. (Page 87—Page 90) 
						

							Operating Instructions
18
2.2 Network Camera Configuration Type
Network Camera can be connected over the LAN/Intranet and the Internet. Select 
from the four Network Camera configuration types. Network parameters differ 
depending on the Network Camera configuration type.
[Type 1]—LAN/Intranet Connection with an Ethernet 
Switching Hub
Network Camera can be installed on the LAN/Intranet. 
*
1 Network traffic can be improved by using the Ethernet switching hub.
[Type 2]—Internet Connection with a Broadband Router
Network Camera can be accessed from the Internet. The broadband router needs 
Port Forwarding (IP Masquerade) feature on page 32.
LAN/Intranet
Ethernet switching hub*1
ModemBroadband 
Router
CATV
xDSL
Optical cable
InternetWAN LAN 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 19
[Type 3]—Internet Direct Connection with a Modem
Network Camera can be installed alone without PC on the network. When you set 
up Network Camera in [Type 3], connect Network Camera temporarily in [Type 
1], [Type 2] or [Type 4].
Note
Some xDSL services use PPPoE. Network Camera does not support PPPoE. 
If the Internet connection requires PPPoE, connect with the broadband router 
supporting PPPoE like [Type 2].
[Type 4]—Direct Connection with a PC
Network Camera can be connected to a PC directly.
Note
Use a category 5 cross cable when connecting directly with the cable to the 
PC.
Modem
Internet
Category 5 cross cable 
						

							Operating Instructions
20
2.3 How to turn on Network Camera for 
Installation
Connect the DC plug of the AC adaptor to the DC IN jack and a category 5 straight/
cross cable to the Ethernet port. Connect the AC plug of the AC adaptor to the 
power outlet to turn on Network Camera. Ethernet Indicator turns on when the 
network is active.
Notes
AC adaptor is used as the main disconnect device, so ensure that the 
power outlet is located/installed near the equipment and is easily 
accessible.
Use only the specified Panasonic AC adaptor PQLV10 (Order No. 
PQLV10Y).
When you set up Network Camera in [Type 3], connect it temporarily in 
[Type 1], [Type 2] or [Type 4].
When the Ethernet Indicator is off, confirm that the Ethernet cable is 
properly connected, or PC, Ethernet hub or broadband router is properly 
working.
Thread the AC adaptor line through the hook upward if it is convenient.
Thread the AC adaptor 
line through the hook 
downward.
Connect a category 5 
cable to the Ethernet port.AC adaptor
Power 
Outlet
DC plug