Panasonic Network Camera Kx Hcm8 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 41
3.3.1 Using Operation Bar
Operation bar controls the general use of Network Camera. The following sections 
describe the general way of using it.
(1) Locked Display: Brightness Control can be locked. 
Locked appears when the operation bar is clicked.
(2) Brightness: Brightness control has nine steps including 
[STD] (Standard). Clicking [-] and [+] buttons changes 
the brightness of image. Brightness...

Operating Instructions
42
3.3.2 Viewing Buffered Image Screen
Buffered Image screen can be viewed by clicking [Viewer] on the operation bar. 
Buffered Image is saved in the internal memory of Network Camera by clicking 
[Start Capture]. Alarm/Timer mode in the Image Transfer on page 62 can also 
buffer the image. Buffered Image is erased by power off, restarting, Update 
Firmware, resetting to Factory Default and when Image Transfer or Name/Time 
window is saved and clicking [Start Capture].
Operation...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 43
Notes
The refresh interval becomes longer as more clients access Network 
Camera.
The image resolution, image quality and object situation affect the 
number of frames in the Buffered Image.
If internal memory is filled after clicking [Start Capture], the image 
buffering will stop automatically.
To save still images on your PC
The PC can save still images taken by JPEG - Regularly Refresh and...

Operating Instructions
44
3.4 Multi-Camera Screen
Four separate Network Camera images can be displayed in both Motion JPEG 
and JPEG - Regularly Refresh. You can jump to each individual Network Camera 
by clicking Camera Name.
Refer to page 76 for how to configure each Network Camera.
Notes
On the Multi-Camera screen, the maximum image resolution is limited 
to 320 x 240.
Motion JPEG stops on the Multi-Camera screen if Limit time of 
continuous Motion JPEG is set up at a Network Camera.
When...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 45
3.5 Setup Page
Setup Page controls all features of Network Camera. Authentication window 
protects the Network Camera security. It enables only administrator to access 
Setup Page by entering ID and Password.
Enter http://IP Address (or URL) 
:Port No./config.html on the web browser 
and press [Enter]. When port number is 80 (default), you do not need to enter port 
number. Then Setup Page appears....

Operating Instructions
46
Setup Page
Note
Firmware Version number indicated on Setup Page is important for your future 
support of Network Camera.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
Version
number 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 47
Item Description
(1) Go to Top PageLinks to Top Page. You can access Single/Multi-
Camera screen in Motion JPEG/JPEG - Regularly 
Refresh. Refer to page 49.
(2) NetworkConfigures the network setting (Static/DHCP, 
Default Gateway, Port Number, DNS, DDNS and 
Bandwidth). Refer to page 50.
(3) Name/TimeSets the Camera Name on the Single Camera 
screen. Date and Time is used in the Alarm/Timer 
mode in...

Operating Instructions
48
(10) External Output 
ControlSets the External Device Control Output setting to 
attach external sensors/devices. (Open or Short to 
GND) Refer to page 78 and page 91.
(11) Indicator ControlSets Power Indicator operation. Indicator will be 
turned on in the default. Refer to page 79.
(12) StatusDisplays general information of Network Camera. 
Refer to page 80.
(13) RestartRestarts Network Camera retaining any settings you 
entered. If any operational issues are changed, try...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 49
3.5.1 Go to Top Page
Click [Go to Top Page] on Setup Page. You can access the Single Camera and 
Multi-Camera screen in Motion JPEG/JPEG - Regularly Refresh.
Click the language to change the display. 

Operating Instructions
50
3.5.2 Network
Network window configures network parameters. Restart Network Camera to 
make the parameters effective.
You can set disable Configuration window from the Setup CD-ROM for the 
security by clearing the check.
1.Click [Network] on Setup Page.