Panasonic Network Camera Kx Hcm280 Operating Instructions
Have a look at the manual Panasonic Network Camera Kx Hcm280 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 125
Operating Instructions
[ F or a ss is t an ce , p le a se ca l l: 1 - 80 0 - 27 2- 7 0 33 ] 1 2 5
Registered Pan/Tilt
positions noticeably
deviate from actual
ones. When moving Pan/Tilt not using the operation bar, e.g.
revolving it manually, restart Network Camera.
Image is out of
focus.•The lens is dirty or dust is attached. Fingerprints, dust,
stains, etc. on the lens can degrade the performance of the
Automatic Focusing feature. Clean the lens with lens...](http://img.usermanuals.tech/thumb/58/66640/w64_kx-hcm280_en_om_d-124.png "Page 125
Operating Instructions
[ F or a ss is t an ce , p le a se ca l l: 1 - 80 0 - 27 2- 7 0 33 ] 1 2 5
Registered Pan/Tilt
positions noticeably
deviate from actual
ones. When moving Pan/Tilt not using the operation bar, e.g.
revolving it manually, restart Network Camera.
Image is out of
focus.•The lens is dirty or dust is attached. Fingerprints, dust,
stains, etc. on the lens can degrade the performance of the
Automatic Focusing feature. Clean the lens with lens...")
![Page 127
Operating Instructions
[ F or a ss is t an ce , p le a se ca l l: 1 - 80 0 - 27 2- 7 0 33 ] 1 2 7
5.5 Confirmation of Network Camera Operation
This procedure checks the Network Camera operation. IP address of the PC has
to be on the same network to be able to access Network Camera. If Top Page
appears, Network Camera has no defect.
1.Push the FACTORY DEFAULT RESET button as illustrated on page 109. All
settings on Network Camera will be set to default.
2.Connect...](http://img.usermanuals.tech/thumb/58/66640/w64_kx-hcm280_en_om_d-126.png "Page 127
Operating Instructions
[ F or a ss is t an ce , p le a se ca l l: 1 - 80 0 - 27 2- 7 0 33 ] 1 2 7
5.5 Confirmation of Network Camera Operation
This procedure checks the Network Camera operation. IP address of the PC has
to be on the same network to be able to access Network Camera. If Top Page
appears, Network Camera has no defect.
1.Push the FACTORY DEFAULT RESET button as illustrated on page 109. All
settings on Network Camera will be set to default.
2.Connect...")
![Page 128
Operating Instructions
128
4.Record the current TCP/IP properties of the PC. They are important in the
later procedure to set the TCP/IP properties of the PC back.
5.Enter 192.168.0.250 in the IP address field and 255.255.255.0 in the
Subnet Mask field and click [OK].
(Windows 95, Windows 98 and Windows Me must restart to activate the
entered TCP/IP properties.)
•Set up the unique IP address which does not overlap other IP
addresses on the network. Overlapped IP addresses on the network
cause the...](http://img.usermanuals.tech/thumb/58/66640/w64_kx-hcm280_en_om_d-127.png "Page 128
Operating Instructions
128
4.Record the current TCP/IP properties of the PC. They are important in the
later procedure to set the TCP/IP properties of the PC back.
5.Enter 192.168.0.250 in the IP address field and 255.255.255.0 in the
Subnet Mask field and click [OK].
(Windows 95, Windows 98 and Windows Me must restart to activate the
entered TCP/IP properties.)
•Set up the unique IP address which does not overlap other IP
addresses on the network. Overlapped IP addresses on the network
cause the...")
![Page 129
Operating Instructions
[ F or a ss is t an ce , p le a se ca l l: 1 - 80 0 - 27 2- 7 0 33 ] 1 2 9
5.6 FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not...](http://img.usermanuals.tech/thumb/58/66640/w64_kx-hcm280_en_om_d-128.png "Page 129
Operating Instructions
[ F or a ss is t an ce , p le a se ca l l: 1 - 80 0 - 27 2- 7 0 33 ] 1 2 9
5.6 FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not...")
Operating Instructions 132 A AC adaptor 12, 20, 117 AC cord 12, 20 ActiveX Controls 39 Administrator 66 Alarm Mode 74 Alarm trigger 74, 75 Analog Video Output terminal 15, 54 ASCII character table 105 Authentication 11, 36, 67, 69 Auto Adjustment 65 B Brightness 85 Broadband Router 32 Buffered Image 51, 73, 75, 76, 79, 80, 82 C Camera Name 64 Camera Setup 84 CATV/xDSL/Optical cable modem 18 CCD 8 Ceiling Mounting Cover 12, 101 Ceiling Plate 2, 12, 99 Circuit diagram 104 Click to Center 41 Configuration window 30 D Date and Time 64, 65 DC IN jack 15, 20 DDNS (Dynamic Domain Name System) 63 Default Gateway 22, 62 Default Setting 96, 109, 110 DHCP (Dynamic Host Configuration Pro- tocol) 62 DNS server address 22 E E-mail 77, 79, 83 Ethernet 10 Ethernet port 15, 20 Ethernet switching hub 18External Device Control Output 89, 103 External I/O 15, 103 External Output Control 89 External sensor 103 External Sensor Input 103 F FACTORY DEFAULT RESET button 15, 109 FCC and Other Information 129 File size of the image 63 Focus 46 Focus Control 85 FTP (File Transfer Protocol) 76, 79, 82 G General User 68 H Help 36, 42 Hole for Ceiling Plate A 15, 99 Home Position Button 43, 48 Host Name 62 I Image Quality 42 Image Size 42 Image Transfer 72 Important Safety Instruction 4 Indicator 14, 90 Indicator Control 90 Interface 10 Internet Connection 18 Internet Direct Connection 19 Internet Explorer 10 IP (Internet Protocol) address 22, 25, 62, 88 J JPEG - Regularly Refresh 38, 52, 71 L LAN/Intranet 18 Lens 14 Limit time of Continuous Motion JPEG 71
Operating Instructions 133 M MAC address 15, 29 Max. Bandwidth Usage 22, 63 Motion JPEG 38 Mounting 98 MS-DOS Prompt 23 Multi Client Access 9 Multi-Camera 53, 87 Multi-Language 37, 70 N Netscape Navigator 10 Network Protocol 10 Network window 60 Non Transfer mode 73 NTP (Network Time Protocol) 65 O On the Air time 71 Operating System 10 Operation Bar 42 P Pan Range 85 Pan/Tilt 43, 85 Pan/Tilt Scan 43 Password 11, 36, 67, 69 Port Forwarding (IP Masquerade) 32 Port No. 22, 61 Power Line Frequency 85 Power Supply 117 PPPoE (Point-to-Point Protocol over Ethernet) 19 Preset Button 48, 50 Preset Positioning 48, 85 Primary time 75, 79, 81 Private IP address 25 R Resolution 42, 71 Restart 92 RJ-45 connector 117 S Screws 12, 98 Secondary time 75, 81 Security 11, 36, 66, 68 Serial Number 15 Setup CD-ROM 12, 13 Setup Page 55 Single Camera 40 Static 22, 62 Status 91 Subnet Mask 22, 25, 62 T TCP/IP 10 TCP/IP Properties window 24, 25, 127 Tilt Range 85 Timer Mode 80 Timer trigger 81 Top Page 31, 33, 36, 37, 59, 128 Top View Image 36, 53, 70 U Update Firmware 93 W Web browser 10 White Balance 84, 116 Windows 10, 24, 127 Z Zoom 45 Zoom Control 85
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America Printed in JapanPSQX2830ZA KK0203JT0 2003 Panasonic Communications Co., Ltd. All Rights Reserved. Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Carefully pack your unit, preferably in the original carton. Attach a letter, detailing the symptom, to the outside of the carton. Symptom Operating Instructions are subject to change without notice. Send the unit to an authorized servicenter, prepaid and adequately insured. Do not send your unit to the Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations do not repair consumer products. When you ship the product Panasonic Servicenters are listed in the servicenter directory. Call 1-800-272-7033 for the location of an authorized servicenter. This Network Camera is designed for use in the United States of America. Sale or use of this product in other countries/areas may violate local laws. After the limited warranty, please contact our Continued Services Technical Support Line at 1-900-555-PANA (1-900-555-7262). If you have difficulty reaching this number, it may be blocked by your phone company. Please contact your local phone company to correct this. For product service Copyright:This manual is copyrighted by Panasonic Communications Co., Ltd. (PCC). Under the applicable copyright laws, this manual may not be reproduced in any form, in whole or part, without the prior written consent of PCC and its licensee.