Panasonic Network Camera BL-C1A BL-C20A Information Guide
Here you can view all the pages of manual Panasonic Network Camera BL-C1A BL-C20A Information Guide. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 161
PQQX14945ZA KK1105JT0 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America 2005 Panasonic Communications Co., Ltd. All Rights Reserved. Panasonic Puerto Rico, Inc. The information in this document is subject to change without notice. Copyright:This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic...
Page 162
Getting Started Network Camera Model No.BL-C1A Please read the Important Information manual before using. This Getting Started explains how to connect, set up and mount the camera. See the Operating Instructions on the Setup CD-ROM for details about the cameras features. •If you cannot complete the setup, see the Troubleshooting manual on the Setup CD-ROM. 2005 Panasonic Communications Co., Ltd. All Rights Reserved. PQQX14937ZB KK0905YT1115 Indoor Use Only Trademarks Adobe, Acrobat and Reader are...
Page 163
![Page 163
When the Single Camera page is displayed, setup
is complete.
•Click [Cancel] and go to the last page if you will mount the camera.
Click [Next] to set up the Internet access to the cam-
era and go to step in Set Up Internet access to the
camera on the next page.
Enter the user name and password, and click [Save].
The Enter Network Password window is displayed.
Enter the user name and password that were set, and
click [OK].
Make a note of the user name and password.
To ensure that the most current...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-162.png "Page 163
When the Single Camera page is displayed, setup
is complete.
•Click [Cancel] and go to the last page if you will mount the camera.
Click [Next] to set up the Internet access to the cam-
era and go to step in Set Up Internet access to the
camera on the next page.
Enter the user name and password, and click [Save].
The Enter Network Password window is displayed.
Enter the user name and password that were set, and
click [OK].
Make a note of the user name and password.
To ensure that the most current...")
When the Single Camera page is displayed, setup is complete. •Click [Cancel] and go to the last page if you will mount the camera. Click [Next] to set up the Internet access to the cam- era and go to step in Set Up Internet access to the camera on the next page. Enter the user name and password, and click [Save]. The Enter Network Password window is displayed. Enter the user name and password that were set, and click [OK]. Make a note of the user name and password. To ensure that the most current...
Page 164
![Page 164
To ensure that the most current image is
displayed, Internet Explorer should be
configured as follows. This will not have a
negative effect on normal use.
1. While viewing any website, click [Tools] [Internet Options].
2. In the section Temporary Internet Files, click [Settings] and check [Every
visit to the page].
If a Security Warning window is displayed when installing ActiveX
Controls, click [Yes].
To install ActiveX Controls on Microsoft Windows XP Service Pack 2, see Security Warning...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-163.png "Page 164
To ensure that the most current image is
displayed, Internet Explorer should be
configured as follows. This will not have a
negative effect on normal use.
1. While viewing any website, click [Tools] [Internet Options].
2. In the section Temporary Internet Files, click [Settings] and check [Every
visit to the page].
If a Security Warning window is displayed when installing ActiveX
Controls, click [Yes].
To install ActiveX Controls on Microsoft Windows XP Service Pack 2, see Security Warning...")
To ensure that the most current image is displayed, Internet Explorer should be configured as follows. This will not have a negative effect on normal use. 1. While viewing any website, click [Tools] [Internet Options]. 2. In the section Temporary Internet Files, click [Settings] and check [Every visit to the page]. If a Security Warning window is displayed when installing ActiveX Controls, click [Yes]. To install ActiveX Controls on Microsoft Windows XP Service Pack 2, see Security Warning...
Page 165
![Page 165
Security Warning window on Microsoft Windows XP Service Pack 2
To view a video (Motion JPEG), ActiveX Controls must be installed. Fol\
low the steps shown below to install ActiveX Controls.
Click the warning displayed above the tabs, and click [Install
ActiveX Control...].Click [Install].
4.Mount the camera.
The camera can be mounted in the following ways.
•Do not mount the camera where the sun light directly hits the camera or \
in
outdoor-type housing without a temperature control system. The camera...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-164.png "Page 165
Security Warning window on Microsoft Windows XP Service Pack 2
To view a video (Motion JPEG), ActiveX Controls must be installed. Fol\
low the steps shown below to install ActiveX Controls.
Click the warning displayed above the tabs, and click [Install
ActiveX Control...].Click [Install].
4.Mount the camera.
The camera can be mounted in the following ways.
•Do not mount the camera where the sun light directly hits the camera or \
in
outdoor-type housing without a temperature control system. The camera...")
Security Warning window on Microsoft Windows XP Service Pack 2 To view a video (Motion JPEG), ActiveX Controls must be installed. Fol\ low the steps shown below to install ActiveX Controls. Click the warning displayed above the tabs, and click [Install ActiveX Control...].Click [Install]. 4.Mount the camera. The camera can be mounted in the following ways. •Do not mount the camera where the sun light directly hits the camera or \ in outdoor-type housing without a temperature control system. The camera...
Page 166
![Page 166
Getting Started
Network Camera
Model No.BL-C20A
Please read the Important Information manual before using.
This Getting Started explains how to connect, set up and mount the
camera. See the Operating Instructions on the Setup CD-ROM for
details about the cameras features.
•If you cannot complete the setup, see the Troubleshooting manual on the Setup CD-ROM.
This product is a wireless Network Camera. Using a PC and wireless route\
r, it allows you to view images in a residence or from distant places...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-165.png "Page 166
Getting Started
Network Camera
Model No.BL-C20A
Please read the Important Information manual before using.
This Getting Started explains how to connect, set up and mount the
camera. See the Operating Instructions on the Setup CD-ROM for
details about the cameras features.
•If you cannot complete the setup, see the Troubleshooting manual on the Setup CD-ROM.
This product is a wireless Network Camera. Using a PC and wireless route\
r, it allows you to view images in a residence or from distant places...")
Getting Started Network Camera Model No.BL-C20A Please read the Important Information manual before using. This Getting Started explains how to connect, set up and mount the camera. See the Operating Instructions on the Setup CD-ROM for details about the cameras features. •If you cannot complete the setup, see the Troubleshooting manual on the Setup CD-ROM. This product is a wireless Network Camera. Using a PC and wireless route\ r, it allows you to view images in a residence or from distant places...
Page 167
![Page 167
NetCam
When the Single Camera page is displayed, setup
is complete.
Click [Next] to set up the Internet access to the cam-
era and go to step in To Set Up Internet Access
to the Camera.
Enter the user name and password, and click [Save].
The Enter Network Password window is displayed.
Enter the user name and password that were set, and
click [OK].
Make a note of the user name and password.
To ensure that the most current image
is displayed, Internet Explorer should
be configured as follows....](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-166.png "Page 167
NetCam
When the Single Camera page is displayed, setup
is complete.
Click [Next] to set up the Internet access to the cam-
era and go to step in To Set Up Internet Access
to the Camera.
Enter the user name and password, and click [Save].
The Enter Network Password window is displayed.
Enter the user name and password that were set, and
click [OK].
Make a note of the user name and password.
To ensure that the most current image
is displayed, Internet Explorer should
be configured as follows....")
NetCam When the Single Camera page is displayed, setup is complete. Click [Next] to set up the Internet access to the cam- era and go to step in To Set Up Internet Access to the Camera. Enter the user name and password, and click [Save]. The Enter Network Password window is displayed. Enter the user name and password that were set, and click [OK]. Make a note of the user name and password. To ensure that the most current image is displayed, Internet Explorer should be configured as follows....
Page 168
![Page 168
Registration with the Viewnetcam.comFREE DynamicDNS service
To ensure that the most current image is
displayed, Internet Explorer should be
configured as follows. This will not have a
negative effect on normal use.
1. While viewing any website, click [Tools]
[Internet Options].
2. In the section Temporary Internet Files, click [Settings] and check [Every
visit to the page].
If a Security Warning window is displayed when installing ActiveX
Controls, click [Yes].
To install ActiveX Controls...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-167.png "Page 168
Registration with the Viewnetcam.comFREE DynamicDNS service
To ensure that the most current image is
displayed, Internet Explorer should be
configured as follows. This will not have a
negative effect on normal use.
1. While viewing any website, click [Tools]
[Internet Options].
2. In the section Temporary Internet Files, click [Settings] and check [Every
visit to the page].
If a Security Warning window is displayed when installing ActiveX
Controls, click [Yes].
To install ActiveX Controls...")
Registration with the Viewnetcam.comFREE DynamicDNS service
To ensure that the most current image is
displayed, Internet Explorer should be
configured as follows. This will not have a
negative effect on normal use.
1. While viewing any website, click [Tools]
[Internet Options].
2. In the section Temporary Internet Files, click [Settings] and check [Every
visit to the page].
If a Security Warning window is displayed when installing ActiveX
Controls, click [Yes].
To install ActiveX Controls...
Page 169
![Page 169
Stand/Tripod
Mounting HoleMounting
Screw
Position Lock
4.Mount the camera.
The camera can be mounted in the following ways.
•Do not mount the camera where the sun light directly hits the camera or \
in
outdoor-type housing without a temperature control system. The camera ma\
y
malfunction due to high temperature.
When you mount the camera, always hook the AC adaptor cord to the hook.
Note
Hook for
AC adaptor cord
This product is for indoor use only. Do not use it outdoors.
The camera may become...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-168.png "Page 169
Stand/Tripod
Mounting HoleMounting
Screw
Position Lock
4.Mount the camera.
The camera can be mounted in the following ways.
•Do not mount the camera where the sun light directly hits the camera or \
in
outdoor-type housing without a temperature control system. The camera ma\
y
malfunction due to high temperature.
When you mount the camera, always hook the AC adaptor cord to the hook.
Note
Hook for
AC adaptor cord
This product is for indoor use only. Do not use it outdoors.
The camera may become...")
Stand/Tripod Mounting HoleMounting Screw Position Lock 4.Mount the camera. The camera can be mounted in the following ways. •Do not mount the camera where the sun light directly hits the camera or \ in outdoor-type housing without a temperature control system. The camera ma\ y malfunction due to high temperature. When you mount the camera, always hook the AC adaptor cord to the hook. Note Hook for AC adaptor cord This product is for indoor use only. Do not use it outdoors. The camera may become...