Panasonic Network Camera Bl C10a Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 61
7.Set the image buffer frequencies, and click [Next>].
• Clicking [
						

							Operating Instructions
62
8.Select the transfer method, and click [Next>].
• Clicking [
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 63
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
• Clicking [
						

							Operating Instructions
64
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
• Clicking [
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 65
9.After you confirm the settings and click [Next>], set E-mail notification and click 
[Next>].
• If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings seeing page 64 and page 65. When finished, 
click [Next>] and go to step 10.
10.Click [Save] after confirming the settings.
• New settings are saved.
• When finished, "Success!" is displayed. Subject • Enter a subject with ASCII characters (see page 96) or 
characters in each language (0—44 characters for a 1-
byte character and 0—22 characters for a 2-byte 
character). But ["] is not available.
Text • Enter text with ASCII characters (see page 96) or 
characters in each language (0—63 characters for a 1-
byte character and 0—31 characters for a 2-byte 
character). But ["] and [end-of-line] key are not available.
*1But [Space], ["], ['], [&], [] are not available.
Setting Description
Disable • The camera does not send an E-mail notification when 
buffering or transferring image.
Enable • The camera sends an E-mail notification (up to 3 
destinations) when buffering or transferring image. Setting Description 
						

							Operating Instructions
66
11 .Click [Go to Image Buffer/Transfer page].
• The Image Buffer/Transfer page is displayed.
Notes
• If you set a short interval to transfer image to a mobile phone, many E-
mails may be sent to it leading to a large phone bill. Therefore, we 
recommend you to set a long interval. In an emergency situation, the E-
mail transfer can be stopped by enabling privacy mode using a mobile 
phone (see page 25).
• Sensor transfer stops its operations until the camera finishes all transfers. 
For example, if the camera transfers 3 images per minute and 6 images 
in total, the sensor will be in the following operation.
• Buffered images will be deleted by doing the following.
• Turning off the camera.
• Saving the settings of Image Buffer/Transfer or Date and Time.
• Executing [Restart], [Update Firmware] or [Reset to Factory Default].
• Clicking [Delete Buffered Images] on the Image Buffer/Transfer page 
(see page 58).
Detectable DetectableUndetectable
1st 2nd 3rd 4th 5th 6th120 seconds
A heat change occurs. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 67
2.14 Specifying Operation Time
The Operation Time page allows you to limit the operation time. The camera image 
turns to a gray screen outside the operation time.
1.Click [Operation Time] on the Setup page.
2.Click [No.] to set the operation time.
Note
If No. 1—7 are disabled, the camera can always be operated.
3.Check [Enable], set the time, and click [Save] 
• Clicking [Cancel] takes you back to the previous page.
Setting Description
Enable • Check the box to enable the setting. Clear the box to 
disable it.
A day of the 
week• Check the box to enable the day. Clear the box to disable 
it.
Operation Time • Select the [Always] option when you do not specify the 
time period. If you specify the time period, select the time 
period option and set the time period. 
						

							Operating Instructions
68
4.Click [Save] when finished.
• New settings are saved.
• The Operation Time page is displayed.
About Operation Time
In the operation time settings, the enabled settings take priority over the disabled 
settings. Therefore, if Monday or Tuesday is disabled in a setting but enabled in 
other settings, the camera can be operated on both Monday and Tuesday. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 69
2.15 Changing Indicator Display
The Indicator Control page allows you to select Indicator operation. Indicator has 
three options.
•Always on
• Turn the indicator on when the camera is accessed.
•Always off
1.Click [Indicator Control] on the Setup page.
2.Select indicator option.
• Clicking [Cancel] cancels your settings without saving changes.
Notes
• See page 6 in the Installation/Troubleshooting for indicator display.
• Selecting [Never turn indicator on] keeps indicator always off.
3.Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed. 
4.Click [Go to Indicator Control page].
• The Indicator Control page is displayed. 
						

							Operating Instructions
70
2.16 Enabling Privacy Mode
Pressing the privacy button turns the camera into privacy mode. You can keep your 
privacy in privacy mode. In this case, the camera operation stops, and the image 
transfer by timer or sensor (see page 51 or page 58) is also stopped. The indicator 
turns red, and viewers see a gray screen. Privacy mode can be controlled from a 
mobile phone (see page 24) or a PC.
1.Click [Privacy Mode] on the Setup page.
2.Click [Save] when finished.
• Selecting [Enable] and clicking [Save] turn the camera into privacy mode.
Notes
• To turn the camera into normal operation, press the privacy button on the 
front of the camera (see page 6 in the Installation/Troubleshooting) during 
privacy mode. Or click [Disable Privacy Mode] after you log in as an 
administrator.
• If you log in as an administrator, you can disable privacy mode from your 
mobile phone. Setting Description
Privacy Button • Clearing the Enable box disables the privacy button on the 
front of the camera.
Privacy Mode • Selecting [Enable] and clicking [Save] turn the camera into 
privacy mode.