Panasonic Network Camera Bl C10a Operating Instructions
Have a look at the manual Panasonic Network Camera Bl C10a Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
Operating Instructions
36
3.Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed.
4.Click [Go to Date and Time page].
• The Date and Time page is displayed.
Note
Date and time settings are subject to change due to the temperature. Date and
time settings may lose about 1 minute per month in 25 °C (77 °F). They may
lose more minutes in colder or hotter places. Confirm the date and time
settings once a month.Setting Description
Time Setting • Select date...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-35.png "Page 36
Operating Instructions
36
3.Click [Save] when finished.
• New settings are saved.
• When finished, \"Success!\" is displayed.
4.Click [Go to Date and Time page].
• The Date and Time page is displayed.
Note
Date and time settings are subject to change due to the temperature. Date and
time settings may lose about 1 minute per month in 25 °C (77 °F). They may
lose more minutes in colder or hotter places. Confirm the date and time
settings once a month.Setting Description
Time Setting • Select date...")
![Page 37
Operating Instructions
[For assistance, please call: 1-800-272-7033] 37
2.6 Changing Camera Settings
The Camera page allows you to set the camera name, white balance, AC power
source frequency and pan/tilt range.
1.Click [Camera] on the Setup page.
2.Set each parameter.
• Clicking [Cancel] cancels your settings without saving changes.](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-36.png "Page 37
Operating Instructions
[For assistance, please call: 1-800-272-7033] 37
2.6 Changing Camera Settings
The Camera page allows you to set the camera name, white balance, AC power
source frequency and pan/tilt range.
1.Click [Camera] on the Setup page.
2.Set each parameter.
• Clicking [Cancel] cancels your settings without saving changes.")
![Page 38
Operating Instructions
38
Setting Description
Camera Name • The camera name is displayed on the Single Camera
page.
• Enter ASCII characters (see page 96) or characters in
each language (1—15 characters for a 1-byte character
and 1—7 characters for a 2-byte character). But [Space],
["], ['], [&], [] are not available.
White Balance Select from the following options.
• Auto (default) — Automatic adjustment
• Fixed Indoor — Electric bulb (2800 K)
• Fixed Fluorescent
(White)— White (3600 K)
•...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-37.png "Page 38
Operating Instructions
38
Setting Description
Camera Name • The camera name is displayed on the Single Camera
page.
• Enter ASCII characters (see page 96) or characters in
each language (1—15 characters for a 1-byte character
and 1—7 characters for a 2-byte character). But [Space],
[\"], ['], [&], [] are not available.
White Balance Select from the following options.
• Auto (default) — Automatic adjustment
• Fixed Indoor — Electric bulb (2800 K)
• Fixed Fluorescent
(White)— White (3600 K)
•...")
![Page 39
Operating Instructions
[For assistance, please call: 1-800-272-7033] 39
3.Click [Save] when finished.
• New settings are saved. If the home position is changed, the camera turns
to the home position.
• When finished, "Success!" is displayed.
4.Click [Go to Camera page].
• The Camera page is displayed. Tilt Range
*1Select from the following options.
• Minimum — Current settings, -40—+10
• Home Position
*2— Current settings, -40—+10
• Maximum — Current settings,...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-38.png "Page 39
Operating Instructions
[For assistance, please call: 1-800-272-7033] 39
3.Click [Save] when finished.
• New settings are saved. If the home position is changed, the camera turns
to the home position.
• When finished, \"Success!\" is displayed.
4.Click [Go to Camera page].
• The Camera page is displayed. Tilt Range
*1Select from the following options.
• Minimum — Current settings, -40—+10
• Home Position
*2— Current settings, -40—+10
• Maximum — Current settings,...")
![Page 40
Operating Instructions
40
Specifying Pan/Tilt Range
1.
Access the camera (see page 8), and click [Single] at the top of the Top page.
2.Open another web browser, and display the Camera page (see page 37).
3.Align the Single Camera page and the Camera page side to side.
4.Set the pan/tilt range.
• Selecting [Current Settings] displays the current angle of the camera.
Select each value while adjusting the pan/tilt on the Single Camera page.
Note
The values must be selected as minimum home position...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-39.png "Page 40
Operating Instructions
40
Specifying Pan/Tilt Range
1.
Access the camera (see page 8), and click [Single] at the top of the Top page.
2.Open another web browser, and display the Camera page (see page 37).
3.Align the Single Camera page and the Camera page side to side.
4.Set the pan/tilt range.
• Selecting [Current Settings] displays the current angle of the camera.
Select each value while adjusting the pan/tilt on the Single Camera page.
Note
The values must be selected as minimum home position...")
![Page 41
Operating Instructions
[For assistance, please call: 1-800-272-7033] 41
2.7 Changing Authentication Setting and
Administrator User Name and Password
The Security: Administrator page allows you to change authentication,
administrator user name and password. The authentication window is displayed,
and allows the registered users to access the camera.
Notes
• If you access the camera for the first time, the window to set administrator user
name and password is displayed....](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-40.png "Page 41
Operating Instructions
[For assistance, please call: 1-800-272-7033] 41
2.7 Changing Authentication Setting and
Administrator User Name and Password
The Security: Administrator page allows you to change authentication,
administrator user name and password. The authentication window is displayed,
and allows the registered users to access the camera.
Notes
• If you access the camera for the first time, the window to set administrator user
name and password is displayed....")
![Page 42
Operating Instructions
42
Note
When users other than an administrator are accessing the camera, [Setup]
and [Maintenance] tab will not be displayed.
3.Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed.Setting Description
General
AuthenticationAuthentication has 2 phases.
• If you set [Permit access from guest users], the camera
does not display the authentication window in camera
access. All guest users can view the image without user
name and...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-41.png "Page 42
Operating Instructions
42
Note
When users other than an administrator are accessing the camera, [Setup]
and [Maintenance] tab will not be displayed.
3.Click [Save] when finished.
• New settings are saved.
• When finished, \"Success!\" is displayed.Setting Description
General
AuthenticationAuthentication has 2 phases.
• If you set [Permit access from guest users], the camera
does not display the authentication window in camera
access. All guest users can view the image without user
name and...")
![Page 43
Operating Instructions
[For assistance, please call: 1-800-272-7033] 43
4.Click [Go to Security: Administrator page].
• The Security: Administrator page is displayed.
Notes
• When the user name and password have been changed, the camera
displays an authentication window. Enter the user name and password,
and click [OK].
Administrator/General Users/Guest Users
The camera has 3 user levels (administrator, general users and guest users).
Note
Guest users mean unregistered...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-42.png "Page 43
Operating Instructions
[For assistance, please call: 1-800-272-7033] 43
4.Click [Go to Security: Administrator page].
• The Security: Administrator page is displayed.
Notes
• When the user name and password have been changed, the camera
displays an authentication window. Enter the user name and password,
and click [OK].
Administrator/General Users/Guest Users
The camera has 3 user levels (administrator, general users and guest users).
Note
Guest users mean unregistered...")
![Page 44
Operating Instructions
44
2.8 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page,
[Login] is displayed at the top of the page. After you log in as an administrator, you
can access the Setup page and the Maintenance page.
1.Click [Login] at the top of the page.
2.Check the login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and password.
3.Enter the user name and password, and click [OK].
• You can log in...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-43.png "Page 44
Operating Instructions
44
2.8 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page,
[Login] is displayed at the top of the page. After you log in as an administrator, you
can access the Setup page and the Maintenance page.
1.Click [Login] at the top of the page.
2.Check the login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and password.
3.Enter the user name and password, and click [OK].
• You can log in...")
![Page 45
Operating Instructions
[For assistance, please call: 1-800-272-7033] 45
2.9 Creating, Modifying or Deleting General Users
The General User page allows you to create, modify or delete general users. Up to
50 general users can be registered. The access level is set for each general user.
If you set [Permit access from guest users] on the Security: Administrator page, the
access level can be set for guest users.
1.Click [General Users] on the Setup page.
2.If you create a...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-44.png "Page 45
Operating Instructions
[For assistance, please call: 1-800-272-7033] 45
2.9 Creating, Modifying or Deleting General Users
The General User page allows you to create, modify or delete general users. Up to
50 general users can be registered. The access level is set for each general user.
If you set [Permit access from guest users] on the Security: Administrator page, the
access level can be set for guest users.
1.Click [General Users] on the Setup page.
2.If you create a...")
![Page 46
Operating Instructions
46
4.Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed.
5.Click [Go to General User page].Setting Description
User ID List • Up to 50 general users can be registered.
• The list is used to modify or delete general user settings.
User Name/
Password• User Name (6 to 15 characters): Enter the user name.
• Password (6 to 15 characters): Enter the password.
Note
The password must be different from the user name.
• Retype Password:...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-45.png "Page 46
Operating Instructions
46
4.Click [Save] when finished.
• New settings are saved.
• When finished, \"Success!\" is displayed.
5.Click [Go to General User page].Setting Description
User ID List • Up to 50 general users can be registered.
• The list is used to modify or delete general user settings.
User Name/
Password• User Name (6 to 15 characters): Enter the user name.
• Password (6 to 15 characters): Enter the password.
Note
The password must be different from the user name.
• Retype Password:...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 41 2.7 Changing Authentication Setting and Administrator User Name and Password The Security: Administrator page allows you to change authentication, administrator user name and password. The authentication window is displayed, and allows the registered users to access the camera. Notes • If you access the camera for the first time, the window to set administrator user name and password is displayed. Make a note of the user name and password so that you will not forget them. • The user name and password should be secured at your own responsibility. Pay attention to the following points. • Set the user name and password as many characters as possible. • Change the password regularly. 1.Click [Administrator] on the Setup page. 2.Set each parameter. • Clicking [Cancel] cancels your settings without saving changes.
Operating Instructions 42 Note When users other than an administrator are accessing the camera, [Setup] and [Maintenance] tab will not be displayed. 3.Click [Save] when finished. • New settings are saved. • When finished, "Success!" is displayed.Setting Description General AuthenticationAuthentication has 2 phases. • If you set [Permit access from guest users], the camera does not display the authentication window in camera access. All guest users can view the image without user name and password. Note If you set [Permit access from guest users], [Login] is displayed at the top of the page. After you log in as an administrator (see page 44), you can access the Setup page and the Maintenance page. • If you set [Do not permit access from guest users], the camera displays authentication window in camera access. Users must enter the user name and password. User Name/ Password• User Name (6 to 15 characters): Enter the user name. • Password (6 to 15 characters): Enter the password. Note The password must be different from the user name. • Retype Password: Reenter the password. • Enter ASCII characters (see page 96). But [Space], ["], ['], [&], [] and [:] are not available.
Operating Instructions [For assistance, please call: 1-800-272-7033] 43 4.Click [Go to Security: Administrator page]. • The Security: Administrator page is displayed. Notes • When the user name and password have been changed, the camera displays an authentication window. Enter the user name and password, and click [OK]. Administrator/General Users/Guest Users The camera has 3 user levels (administrator, general users and guest users). Note Guest users mean unregistered users. Set [Permit access from guest users] on the Security: Administrator page (see page 41).Items Administrator General Users Guest Users User Name and PasswordRequired Required Not Required Number of Users 1 50 — Accessible Pages All Pages Pages Except For Setup and Maintenance pagePages Except For Setup and Maintenance page Access Level 1—3 All Operations Access level can be set for each general user (see page 45).Access level can be set for guest users (see page 45).
Operating Instructions 44 2.8 Logging in to the Camera If you set [Permit access from guest users] on the Security: Administrator page, [Login] is displayed at the top of the page. After you log in as an administrator, you can access the Setup page and the Maintenance page. 1.Click [Login] at the top of the page. 2.Check the login mode, and click [Login]. Note The authentication window is displayed. Enter the user name and password. 3.Enter the user name and password, and click [OK]. • You can log in to the camera.
Operating Instructions [For assistance, please call: 1-800-272-7033] 45 2.9 Creating, Modifying or Deleting General Users The General User page allows you to create, modify or delete general users. Up to 50 general users can be registered. The access level is set for each general user. If you set [Permit access from guest users] on the Security: Administrator page, the access level can be set for guest users. 1.Click [General Users] on the Setup page. 2.If you create a general user, click [Create]. 3.Set each parameter.• When setting [Do not permit access from guest users]• When setting [Permit access from guest users] • If you change the settings of general users or guest users, select their name and click [Modify]. The modification page is displayed. • If you delete a general user, select the name and click [Delete]. The confirmation page is displayed. • Settings for a general user • Settings for guest users • Clicking [Cancel] takes you back to the previous page without saving changes.
Operating Instructions 46 4.Click [Save] when finished. • New settings are saved. • When finished, "Success!" is displayed. 5.Click [Go to General User page].Setting Description User ID List • Up to 50 general users can be registered. • The list is used to modify or delete general user settings. User Name/ Password• User Name (6 to 15 characters): Enter the user name. • Password (6 to 15 characters): Enter the password. Note The password must be different from the user name. • Retype Password: Reenter the password. • Enter ASCII characters (see page 96). But [Space], ["], ['], [&], [] and [:] are not available. Access Level Access level is set for each general user. Each level offers different operations. • Level 1 users view only image. • Level 2 users view the image and operate only preset buttons. • Level 3 users view the image and control all operations.
Operating Instructions [For assistance, please call: 1-800-272-7033] 47 2.10 Changing Initial Settings on the Single Camera page or the Multi-Camera page The Image Display page allows you to change initial settings (display settings when a user accesses the camera) of image resolution, image quality and refresh interval. Motion JPEG display time can be set here. 1.Click [Image Display] at the top of the page. 2.Set each parameter. • Clicking [Cancel] cancels your settings without saving changes.
Operating Instructions 48 3.Click [Save] when finished. • New settings are saved. • When finished, "Success!" is displayed. 4.Click [Go to Image Display page]. • The Image Display page is displayed.Setting Description Image Resolution • Select the image resolution. 640 x 480 pixels (Only for the Single Camera page) 320 x 240 pixels (default) 160 x 120 pixels (Only for the Multi-Camera page) Image Quality • Select the image quality. [Favor Clarity] optimizes for good quality. [Standard] offers standard quality. [Favor Motion] optimizes for enhanced motion. Refresh Interval • Select a refresh interval. (Motion—60-second interval) Limit Continuous Motion JPEG • Limit time of Continuous Motion JPEG •Refresh Interval• Set the time to change the video (Motion JPEG) to still images. (10 seconds—Unlimited) • Set a refresh interval after the image is changed to still images. (3-second interval—60-second interval) Language • Select the initial language from English, French, German, Italian, Spanish, Russian, Simplified Chinese or Japanese. The selected language is displayed as the initial language on the Top, Single Camera and Multi-Camera page. If you select English or Japanese, all pages can be changed. But if you select other language, the Setup, Maintenance and Support pages are displayed only in English.
Operating Instructions [For assistance, please call: 1-800-272-7033] 49 2.11 Configuring Multiple Cameras The Multi-Camera Setup page allows you to configure the camera IP addresses and camera names to view multiple images on the Multi-Camera page. These configurations are required to use the Multi-Camera page. 1.Click [Multi-Camera] on the Setup page. 2.Click [Add]. Notes • If you click the camera number, the modification page is displayed. The camera setting can be modified or deleted on it. • If you configured multiple cameras, you can change the camera number. Select the number, and click [Move]. 3.Set each parameter. • Clicking [Cancel] cancels your settings without saving changes.
Operating Instructions 50 Notes • Set the private IP address and port number for the camera on the same LAN. • If you access the camera from the Internet, set the host name (or the global IP address) and port number. 4.Click [Save] when finished. • New settings are saved. • The Multi-Camera Setup page is displayed.Setting Description Display • Check the box to enable the camera. IP Address *1 or Host Name*2• Set the IP address or the host name to enable the camera. Port No. • Set the port number (1—65535). Camera Name *3• This camera name is displayed only on the Multi-Camera page. *1Set 4 digits (0—255) and 3 periods such as "192.168.0.253". But "0.0.0.0" and "255.255.255.255" are not available. *2Enter ASCII characters for the host name (see page 96). But [Space], ["], ['], [#], [&], [%], [=], [+], [?], [] are not available. Enter 1—255 characters. *3Enter ASCII characters (see page 96) or characters in each language (1—15 characters for a 1-byte character and 1—7 characters for a 2-byte character). But [Space], ["], ['], [#], [&], [%], [=], [+], [?], [] are not available.