Panasonic Network Camera Bl C10a Operating Instructions
Have a look at the manual Panasonic Network Camera Bl C10a Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
Operating Instructions
86
Multi-
CameraMulti-Camera [Blank] - -
Display Checked When setting
Multi-Camera-
IP Address or Host
Name[Blank] When setting
Multi-CameraIP address*1
Host name*5 is
1—255
characters.
Port No. [Blank] When setting
Multi-Camera20, 21, 25 and
110 are not
available.
Camera Name [Blank] When setting
Multi-Camera1—15 characters
*7
Buffer/
TransferStatus Off - -
Trigger Timer - -
Active Time of Trigger Always - -
Transfer Method No Transfer,
No Memory
Overwrite--
Notify - -...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-85.png "Page 86
Operating Instructions
86
Multi-
CameraMulti-Camera [Blank] - -
Display Checked When setting
Multi-Camera-
IP Address or Host
Name[Blank] When setting
Multi-CameraIP address*1
Host name*5 is
1—255
characters.
Port No. [Blank] When setting
Multi-Camera20, 21, 25 and
110 are not
available.
Camera Name [Blank] When setting
Multi-Camera1—15 characters
*7
Buffer/
TransferStatus Off - -
Trigger Timer - -
Active Time of Trigger Always - -
Transfer Method No Transfer,
No Memory
Overwrite--
Notify - -...")
![Page 87
Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
Preset Buttons
Items Default Required Notes
Preset
ButtonsPreset 1 UpperLeft - -
Preset 2 UpperRight - -
Preset 3 LowerLeft - -
Preset 4 LowerRight - -
*1 Set 4 digits (0—255) and 3 periods such as "192.168.0.253". But "0.0.0.0" and
"255.255.255.255" are not available.
*2 Set the number of 1—65535.
*3 Enter ASCII characters for the host name (see page 96). But [Space],...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-86.png "Page 87
Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
Preset Buttons
Items Default Required Notes
Preset
ButtonsPreset 1 UpperLeft - -
Preset 2 UpperRight - -
Preset 3 LowerLeft - -
Preset 4 LowerRight - -
*1 Set 4 digits (0—255) and 3 periods such as \"192.168.0.253\". But \"0.0.0.0\" and
\"255.255.255.255\" are not available.
*2 Set the number of 1—65535.
*3 Enter ASCII characters for the host name (see page 96). But [Space],...")
![Page 89
Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
3.6 Setting an IP Address on Your PC
Your PC's IP address can be assigned by the following procedures.
1.Display the TCP/IP Properties window.
• The steps are different depending on your OS. The steps are shown
below.
• When using Windows 2000 and Windows XP, log in as an administrator to
access the TCP/IP Properties window.
2.Enter IP address and subnet mask.
3.Click [OK].
• In Windows 98SE or...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-88.png "Page 89
Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
3.6 Setting an IP Address on Your PC
Your PC's IP address can be assigned by the following procedures.
1.Display the TCP/IP Properties window.
• The steps are different depending on your OS. The steps are shown
below.
• When using Windows 2000 and Windows XP, log in as an administrator to
access the TCP/IP Properties window.
2.Enter IP address and subnet mask.
3.Click [OK].
• In Windows 98SE or...")
![Page 91
Operating Instructions
[For assistance, please call: 1-800-272-7033] 91
Automatic Setup (Local or Internet Access) or Manual Setup
1.
Click [Execute] on the Camera List window shown on page 90.
2.Click each button to execute the program.
Notes
• For the first time installation or after pressing the Factory Default Reset
button, you must select [Automatic Setup (Local Access Only)]. To start
the Manual Setup, execute Automatic Setup (Local Access Only) first, and
then...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-90.png "Page 91
Operating Instructions
[For assistance, please call: 1-800-272-7033] 91
Automatic Setup (Local or Internet Access) or Manual Setup
1.
Click [Execute] on the Camera List window shown on page 90.
2.Click each button to execute the program.
Notes
• For the first time installation or after pressing the Factory Default Reset
button, you must select [Automatic Setup (Local Access Only)]. To start
the Manual Setup, execute Automatic Setup (Local Access Only) first, and
then...")
![Page 93
Operating Instructions
[For assistance, please call: 1-800-272-7033] 93
3.Click the [Connections] tab, and click [LAN Settings].
4.See if the Use a proxy server check box is checked or not. If checked, click
[Advanced...].
• If not checked, click [Cancel]. Proxy settings are not required.
See if the check
box is checked or not.
If checked,
click [Advanced...].](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-92.png "Page 93
Operating Instructions
[For assistance, please call: 1-800-272-7033] 93
3.Click the [Connections] tab, and click [LAN Settings].
4.See if the Use a proxy server check box is checked or not. If checked, click
[Advanced...].
• If not checked, click [Cancel]. Proxy settings are not required.
See if the check
box is checked or not.
If checked,
click [Advanced...].")
![Page 94
Operating Instructions
94
5.Enter the camera IP address into the Do not use proxy server for addresses
beginning with data field.
6.Click [OK].](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-93.png "Page 94
Operating Instructions
94
5.Enter the camera IP address into the Do not use proxy server for addresses
beginning with data field.
6.Click [OK].")
![Page 95
Operating Instructions
[For assistance, please call: 1-800-272-7033] 95
3.8.2 Setting UPnP to Display Camera Shortcut in My
Network Places
To display the camera shortcut in the My Network Places folder, Windows
component should be added. Enable UPnP (Universal Plug and Play) following the
steps below.
3.8.3 Setting the Internet Temporary File Setting on Web
Browser
The old image may be displayed. In this case, set the web browser following the
steps below.OS Steps...](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-94.png "Page 95
Operating Instructions
[For assistance, please call: 1-800-272-7033] 95
3.8.2 Setting UPnP to Display Camera Shortcut in My
Network Places
To display the camera shortcut in the My Network Places folder, Windows
component should be added. Enable UPnP (Universal Plug and Play) following the
steps below.
3.8.3 Setting the Internet Temporary File Setting on Web
Browser
The old image may be displayed. In this case, set the web browser following the
steps below.OS Steps...")
![Page 96
Operating Instructions
96
3.9 ASCII Character Table
(space)
!
#
$
%
&
(
)
*
+
,
-
.
/0
1
2
3
4
5
6
7
8
9
:
;
<
=
>
?
ASCII Character Table
@
A
B
C
D
E
F
G
H
I
J
K
L
M
N
OP
Q
R
S
T
U
V
W
X
Y
Z
[
\
]
^
_`
a
b
c
d
e
f
g
h
i
j
k
l
m
n
op
q
r
s
t
u
v
w
x
y
z
{
|
}
~](http://img.usermanuals.tech/thumb/58/69508/w64_bl-c10a_en_om_d-95.png "Page 96
Operating Instructions
96
3.9 ASCII Character Table
(space)
!
#
$
%
&
(
)
*
+
,
-
.
/0
1
2
3
4
5
6
7
8
9
:
;
<
=
>
?
ASCII Character Table
@
A
B
C
D
E
F
G
H
I
J
K
L
M
N
OP
Q
R
S
T
U
V
W
X
Y
Z
[
\
]
^
_`
a
b
c
d
e
f
g
h
i
j
k
l
m
n
op
q
r
s
t
u
v
w
x
y
z
{
|
}
~")
Operating Instructions [For assistance, please call: 1-800-272-7033] 91 Automatic Setup (Local or Internet Access) or Manual Setup 1. Click [Execute] on the Camera List window shown on page 90. 2.Click each button to execute the program. Notes • For the first time installation or after pressing the Factory Default Reset button, you must select [Automatic Setup (Local Access Only)]. To start the Manual Setup, execute Automatic Setup (Local Access Only) first, and then start the Setup Program to execute the Manual Setup. • See the Getting Started for the local and Internet access setup. Manual Setup window Set up each parameter seeing page 30—page 31. • If "Camera setup complete" is displayed, click [Close] to finish the Manual Setup. 3.Close all Setup windows.Sets up Local Access. Sets up Internet Access. Starts the Manual Setup. Displays the Setup page (see page 26).
Operating Instructions 92 3.8 Setting Your PC 3.8.1 Setting the Proxy Server Settings on Web Browser If the proxy server is not used, the settings are not required. If you are using the proxy server, the following settings are required. • A proxy server may prevent access to the camera depending in a corporate environment. In this case, your web browser must be set to use the proxy server to access the camera. Consult your ISP or network administrator. Notes • A proxy server is used to protect your network connected to the Internet. • If the camera is accessed via a proxy server, problems may occur. Consult your network administrator before installing the camera. • If the camera is accessed via a proxy server, the refresh interval may be slow. How to Set the Proxy Server Settings 1. Start up Internet Explorer. (The example is Internet Explorer 6.0.) 2.Click [Tools] [Internet Options...].
Operating Instructions [For assistance, please call: 1-800-272-7033] 93 3.Click the [Connections] tab, and click [LAN Settings]. 4.See if the Use a proxy server check box is checked or not. If checked, click [Advanced...]. • If not checked, click [Cancel]. Proxy settings are not required. See if the check box is checked or not. If checked, click [Advanced...].
Operating Instructions 94 5.Enter the camera IP address into the Do not use proxy server for addresses beginning with data field. 6.Click [OK].
Operating Instructions [For assistance, please call: 1-800-272-7033] 95 3.8.2 Setting UPnP to Display Camera Shortcut in My Network Places To display the camera shortcut in the My Network Places folder, Windows component should be added. Enable UPnP (Universal Plug and Play) following the steps below. 3.8.3 Setting the Internet Temporary File Setting on Web Browser The old image may be displayed. In this case, set the web browser following the steps below.OS Steps Windows Me [Start] [Settings] [Control Panel] [Application] [Windows File] tab Select [Communication] [Detail] Check [UPnP] [OK] [OK] [Restart] Complete Windows XP [Start] ( [Settings]) [Control Panel] [Programs] [Windows Components] Select [Network Service] [Properties] Check [UPnP] [OK] [Next] Complete [Tools] [Internet Options] [General] tab [Settings] in the Temporary Internet files Check [Every visit to the page] in the Check for newer versions of stored pages [OK] [OK] Complete
Operating Instructions
96
3.9 ASCII Character Table
(space)
!
#
$
%
&
(
)
*
+
,
-
.
/0
1
2
3
4
5
6
7
8
9
:
;
<
=
>
?
ASCII Character Table
@
A
B
C
D
E
F
G
H
I
J
K
L
M
N
OP
Q
R
S
T
U
V
W
X
Y
Z
[
\
]
^
_`
a
b
c
d
e
f
g
h
i
j
k
l
m
n
op
q
r
s
t
u
v
w
x
y
z
{
|
}
~
Operating Instructions [For assistance, please call: 1-800-272-7033] 97 3.10 File Size and Number of Buffered Images The following table shows the relationship between the file size of the image and the maximum number of buffered images. Note The following file sizes were shown at the largest value. Resolution Items Capture Favor ClarityStandard Favor MotionMobile Phone 640 x 480File Size About 60 KBAbout 50 KBAbout 33 KBAbout 20 KB- Buffered Images- About 80About 120About 200- 320 x 240File Size About 30 KBAbout 25 KBAbout 16 KBAbout 8 KBAbout 8 KB Buffered Images- About 160About 250About 500About 500 160 x 120File Size About 10 KBAbout 7 KBAbout 5 KBAbout 3 KBAbout 3 KB Buffered Images- About 570About 800About 1330About 1330
Operating Instructions 98 3.11 Specifications Network Camera Items Specifications Pan/Tilt Angle Pan: -50 ° to +50 °, Tilt: -40 ° to +10 ° Number of Pixels 1/4-inch CMOS Sensor 320,000 pixels Illuminance 1—10,000 lx White Balance Auto/Manual/Hold Focus Fixed 0.5 m (20 inches)—Infinity Caliber Ratio (F No.) F2.8 Horizontal Viewing Angle 43 ° Exposure Auto Other Specifications Items Specifications Video Compression JPEG (3 Levels) Video Resolution 640 x 480, 320 x 240 (default), 160 x 120 Buffered Image *1 *1The maximum number of frames changes depending on the image quality and what object you buffer. About 250 frames (320 x 240) with time display Frame rate *2 *2Frame rate changes depending on the network environment, the PC performance, the image quality and what object you view. Max. 7.5 frames/second (640 x 480) Max. 15 frames/second (320 x 240 or 160 x 120) Supported Protocols TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, ARP, ICMP, POP3, NTP Message Transfer Condition Pyroelectric Infrared Sensor or Timer Image Transfer Method SMTP, FTP
Operating Instructions [For assistance, please call: 1-800-272-7033] 99 Other Specifications Items Specifications Interface 10Base-T/100Base-TX Ethernet RJ-45 connector x 1 Sensor Detection Method Pyroelectric Infrared Sensor Sensor Range Horizontally About 30 °, Vertically About 85 °, Distance About 5 m (16.4 feet) (When the temperature is 20 °C [68 °F]) Indicator Display Power/Network Communication/Camera operation/ Ethernet link Dimension (HWD) About 74 mm (2.91 inches) x About 98 mm (3.86 inches) x About 61 mm (2.40 inches) Weight 170 (0.37 lb.) (Only the unit) Power Supply AC adaptor: Input 120 V AC, 60 Hz Output 9 V DC, 500 mA Consumption: About 2.5 W (4 W during pan/tilt scan) Temperature Operation: +5 °C (+41 °F) to +40 °C (+104 °F) Storage: +0 °C (+32 °F) to +50 °C (+122 °F) Humidity Operation: 20 %—80 % (No Condensation) Storage: 20 %—90 % (No Condensation)