Panasonic Network Camera Bb Hcm403a Operating Instructions

							Operating Instructions
81
3.Set each parameter.
 Settings for general users  Settings for guest users
 Clicking [Cancel] takes you back to the previous page without 
saving changes.
Setting Description
User ID List  Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
 The password must be different from the user name.
 Retype Password: Reenter the password.
 Enter ASCII characters (see page 176). Note that 
[Space], [], [], [&], [] and [:] are not available. 
						

							Operating Instructions
82
4.Click [Save] when finished.
 The new settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
 The General User page is displayed.Setting Description
Access Level An access level is set for each general user. Check each 
feature to enable access to it.
 In the limit time of continuous Motion JPEG setting, set the 
time for changing video (Motion JPEG) to still images for 
each user. (Not permitted, Unlimited, 10 seconds—60 
minutes) In the refresh interval setting, set the refresh 
interval after the video has changed to still images. (3—60 
seconds)
 See the corresponding page for details of the following 
features.
Brightness Control (see page 23)
External Output Control (see page 23)
Change Refresh Interval (see page 23)
Change Resolution (see page 23)
Change Quality (see page 23)
Capture Image Button (see page 22)
Listen (see page 25)
Talk (see page 25)
View Multi-Camera page (see page 27)
View Buffered Image page (see page 29) 
						

							Operating Instructions
83
4 Buffering or Transferring Images
4.1 Procedures of Buffering or Transferring 
Images
The procedures from this page to page 117 describe settings of the image buffer 
or transfer. See the procedures below to understand the general outline of the 
settings.
Buffer/Transfer by Timer 
(Page 84)
Transfer Method 
(Select one from the lists.)
 No Transfer, No Memory 
Overwrite
 No Transfer, Memory 
Overwrite
 FTP
 E-mailTransfer Method 
(Select one from the lists.)
 No Transfer, No Memory 
Overwrite
 No Transfer, Memory 
Overwrite
 FTP
 E-mailTransfer Method 
(Select one from the lists.)
 No Transfer, No Memory 
Overwrite
 No Transfer, Memory 
Overwrite
 FTP
 E-mail Buffer/Transfer by Alarm 
Signal (Page 94)
E-mail Notification When 
Triggered Setting
Changing Motion Detection 
Sensitivity (Page 120)
E-mail Notification When 
Triggered Setting
Notifying the Alarm Log 
(Page 124)Notifying the Alarm Log 
(Page 124) Buffer/Transfer by 
Motion Detection Signal 
(Page 106)
Time Setting
Image Setting
Image Buffer Frequency Setting
Time Setting
Image Setting
Image Buffer Frequency Setting
Save the settings to complete.
Save the settings to complete.
Time Setting
Image Setting
Image Buffer Frequency Setting
Save the settings to complete. 
						

							Operating Instructions
84
4.2 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
 If you are recording images to the SD memory card, refresh interval slows 
down.
1.Click [Trigger] on the Setup page.
2.Click a No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for the trigger, and click 
[Next>].
 Click [Delete Buffered Images] to delete images already buffered.
 Click [Save] to save the settings.
 Clicking [Cancel] takes you back to the Trigger page without saving 
changes.
Note
 If you click [Save], all buffered images on the internal memory and SD 
memory card are deleted.
Setting Description
Enable Image 
Buffer/Transfer Check the box to enable the buffer/transfer. Uncheck the 
box to disable it. 
						

							Operating Instructions
85
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 67).
 Clicking [].
 Clicking [
						

							Operating Instructions
86
6.Set the image buffer frequency, and click [Next>].
 Clicking [
						

							Operating Instructions
87
7.Select the transfer method, and click [Next>].
 Clicking [
						

							Operating Instructions
88
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [
						

							Operating Instructions
89
Overwrite 
Setting Selecting [Overwrite File] overwrites the image on the server 
with a newer image. Selecting [Save as New File with Time 
Stamp] saves the image attaching time stamps on the file 
name, and the images are not overwritten.
E.g. image20060101093020500
.jpg
The underlined numbers mean 9h30min20s500ms on 
January 1, 2006. The letter s is inserted after the day when 
referring to a daylight saving time zone.
Data 
Transfer 
Method Select [Passive Mode] normally. If the transfer does not work, 
select [Active Mode] and check the operation.
*1 Note that [Space], [], [], [&], [] are not available.
*2 Note that [] is not available.
Setting Description 
						

							Operating Instructions
90
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [