Home > Panasonic > Camera > Panasonic Network Camera Bb Hcm403a Operating Instructions

Panasonic Network Camera Bb Hcm403a Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Network Camera Bb Hcm403a Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Operating Instructions
    171
    Buffer/Transfer
    Items Default Required Note
    Trigger Status Off - -
    Trigger Timer - Timer/Alarm1/
    Alarm2/Motion 
    Detection
    Active Time of Trigger Always - -
    Image Setting
    (Image Resolution)320 x 240 - 160 x 120, 320 x 
    240, 640 x 480
    Image Quality Standard - Favor Clarity, 
    Standard, Favor 
    Motion, Mobile 
    phone
    Image Buffer 
    FrequencyEvery 1 s, 
    buffer 1 
    image.- 1 image per 
    hour—30 
    images per 
    second
    Transfer Method No Transfer, 
    No Memory 
    Overwrite--
    Notify Disable When 
    selecting 
    Alarm1, 
    Alarm2 or 
    Motion 
    Detection-
    Motion 
    DetectionThreshold Third blocks 
    from the left--
    Sensitivity Center - - 
    						
    							Operating Instructions
    172
    Alarm 
    LogA setup of operation Disable When 
    selecting 
    Alarm1, 
    Alarm2 or 
    Motion 
    Detection 
    in Trigger.Disable/ 
    Enable(When 
    there is no new-
    arrival alarm 
    log:Disable)/
    Enable(When 
    there is no new-
    arrival alarm 
    log:Enable)
    Active Time Checked AM/PM, 1–12 
    (h), 0/10/20/30/
    40/50 (min)
    Time PM 12 h 0 min -
    Notice setup of an 
    alarm log[Blank] -
    Port No. (SMTP) 25
    *2
    Port No. (POP) 110*2
    Subject Alarm Log -
    How to authenticate No 
    authentication-No 
    authentication/
    POP before 
    SMTP 
    authentication/
    SMTP 
    authentication Items Default Required Note 
    						
    							Operating Instructions
    173
    Advanced
    Items Default Required Note
    Image 
    DisplaySingle Camera 
    Image Resolution320  x  240 - 320 x 240 or 640 
    x 480
    Single Camera 
    Image QualityStandard - Favor Clarity, 
    Standard or 
    Favo r M ot i on
    Single Camera 
    Refresh IntervalMotion - 3, 5, 10, 30, 60 
    (s) or Motion
    Multi-Camera 
    Image Resolution320  x  240 - 160 x 120 or 320 
    x 240
    Multi-Camera 
    Image QualityStandard - Favor Clarity, 
    Standard or 
    Favo r M ot i on
    Multi-Camera 
    Refresh IntervalMotion When 
    reducing 
    traffic3, 5, 10, 30, 60 
    (s) or Motion
    Time stamp setting Disable - Enable/Disable
    Language English - English/
    Japanese/
    French/German/
    Italian/Spanish/
    Simplified 
    Chinese/
    Russian/Korean
    Banner Display 
    EnableNo check When 
    displaying the 
    banner-
    Banner user All users - All users/
    Administrator 
    only/General 
    user only
    Image URL [Blank] - 0—127 
    characters
    *4
    Link URL [Blank] - 1—127 
    characters*4 
    						
    							Operating Instructions
    174
    *1In IPv4, set 4 numbers (0—255) and 3 periods, by such as 192.168.0.253. Note that 
    0.0.0.0 and 255.255.255.255 are not available.
    In IPv6, set 8 hexadecimal number divided by :. Consecutive 0s can be abbreviated as ::. 
    (E.g. 2001:2:3:4::5)
    *2Set the number of 1—65535.*3Enter ASCII characters (see page 176). Note that [Space], [], [], [&], [] and [:] are not 
    available.
    *4Enter ASCII characters for the host name (see page 176). Note that [Space], [], [], [&], [] are not available.
    *5Enter ASCII characters for the host name (see page 176). Note that [Space], [], [], [#], [&], 
    [%], [=], [+], [?], [] are not available.
    *6Enter ASCII characters (see page 176) or characters from other languages (1—15 characters 
    for a 1-byte character and 1
    —7 characters for a 2-byte character). Note that [Space], [], [], 
    [&], [] are not available.
    Multi-
    CameraMulti-Camera No.1 
    Selfcamera--
    Display Checked When setting 
    Multi-Camera-
    IP Address or Host 
    Nameselfcamera When setting 
    Multi-CameraIP address
    *1
    Host name*5 is 
    1—255 
    characters.
    Port No. - - When setting 
    Multi-Camera20, 21, 25 and 
    110 are not 
    available
    *2.
    Camera Name
    BB-HCM403AWhen setting 
    Multi-Camera1—15 
    characters*7
    Change Camera 
    OrderFrom No.1 To 
    No.1-No.1–No.12
    Operation 
    TimeOperation Time Always - -
    External 
    OutputExternal Device 
    Control Output Open - Open/Short to 
    GND
    Button name 
    modificationOpen/Short - -
    Indicator 
    ControlIndicator Control Turn indicator 
    on when 
    camera is on-- Items Default Required Note 
    						
    							Operating Instructions
    175
    *7Enter ASCII characters (see page 176) or characters from other languages (1—15 characters 
    for a 1-byte character and 1
    —7 characters for a 2-byte character). Note that [Space], [], [], 
    [#], [&], [%], [=], [+], [?], [] are not available.
    *8[] and [:] are not available. 
    						
    							Operating Instructions
    176
    7.7 ASCII Character Table
    (space)
    !
    
    #
    $
    %
    &
    
    (
    )
    *
    +
    ,
    -
    .
    /0
    1
    2
    3
    4
    5
    6
    7
    8
    9
    :
    ;
    <
    =
    >
    ?
    ASCII Character Table
    @
    A
    B
    C
    D
    E
    F
    G
    H
    I
    J
    K
    L
    M
    N
    OP
    Q
    R
    S
    T
    U
    V
    W
    X
    Y
    Z
    [
    \
    ]
    ^
    _`
    a
    b
    c
    d
    e
    f
    g
    h
    i
    j
    k
    l
    m
    n
    op
    q
    r
    s
    t
    u
    v
    w
    x
    y
    z
    {
    |
    }
    ~ 
    						
    							Operating Instructions
    177
    7.8 File Size and Number of Buffered Images
    The following table shows the relationship between the file size of the image and 
    the maximum number of buffered images.
    Note
     The following file sizes are shown at their maximum value.
    *1The values shown are the file sizes when transferring to a cell phone.
    The maximum number of Buffer/Transfer images
    If the timer, alarm or motion detection trigger is enabled, the internal memory 
    capacity is divided into the number of the triggers [maximum 5 triggers].
    E.g.
    At 320 x 240 pixels resolution and standard quality, the camera can buffer about 
    125 frames. If each timer, alarm and motion detection trigger is enabled, the 
    internal memory is divided into 3 sections. In this case, each trigger can buffer 
    about 40 frames.Resolution Items Capture Favor 
    ClarityStandard Favor 
    MotionMobile 
    Phone*
    1
    640 x 480 
    (pixels)File Size About 60 KB About 
    50 KBAbout 
    33 KBAbout 
    20 KB-
    Buffered 
    Images- About 
    40About 
    60About 
    100-
    320 x 240 
    (pixels)File Size About 30 KB About 
    25 KBAbout 
    16 KBAbout 
    8 KBAbout 
    8 KB
    Buffered 
    Images- About 
    80About 
    125About 
    250About 
    250
    160 x 120 
    (pixels)File Size About 10 KB About 
    7 KBAbout 
    5 KBAbout 
    3 KBAbout 
    3 KB
    Buffered 
    Images- About 
    290About 
    400About 
    675About 
    675 
    						
    							Operating Instructions
    178
    7.9 Number of Images on the SD Memory Card
    The camera supports the Panasonic SD memory card.
     2 GB: RP-SDK02G
     1 GB: RP-SDK01G
     512 MB: RP-SDK512
     256 MB: RP-SDH256
     128 MB: RP-SD128B
     64 MB: RP-SD064B
    Unit: frame Resolution/
    Image Quality2 GB 1 GB 512 MB
    160
    x
    120 
    (pixels)Favor Motion About 620,000 About 300,000 About 157,000
    Standard About 370,000 About 180,000 About 94,000
    Favor Clarity About 260,000 About 130,000 About 67,000
    320
    x
    240 
    (pixels)Favor Motion About 230,000 About 110,000 About 58,000
    Standard About 115,000 About 58,000 About 29,000
    Favor Clarity About 70,000 About 37,000 About 18,000
    640
    x
    480 
    (pixels)Favor Motion About 90,000 About 47,000 About 23,000
    Standard About 55,000 About 28,000 About 14,000
    Favor Clarity About 35,000 About 18,000 About 9,000
    Resolution/
    Image Quality256 MB 128 MB 64 MB
    160
    x
    120 
    (pixels)Favor Motion About 78,000 About 39,000 About 19,000
    Standard About 47,000 About 23,000 About 11,000
    Favor Clarity About 33,000 About 16,000 About 8,000
    320
    x
    240 
    (pixels)Favor Motion About 29,000 About 14,000 About 7,000
    Standard About 14,000 About 7,000 About 3,000
    Favor Clarity About 9,000 About 4,000 About 2,000
    640
    x
    480 
    (pixels)Favor Motion About 11,000 About 5,000 About 2,000
    Standard About 7,000 About 3,000 About 1,000
    Favor Clarity About 4,000 About 2,000 About 1,000 
    						
    							Operating Instructions
    179
    7.10 Specifications
    Network Camera
    Other SpecificationsItems Specifications
    Tilt Angle Tilt: 0° to +65°
    Sensor Type 1/4-inch CCD (Interlace type), 320,000 pixels 
    (Effective Pixels)
    Illumination 3—100,000 lx (0.2—100,000 lx when in color night 
    view mode)
    White Balance Auto/Manual/Hold
    Focus Fixed 0.5 m (20 inches)—infinity
    Caliber Ratio (F No.) F3.5
    Horizontal Viewing Angle 53°
    Vertical Viewing Angle 40°
    Exposure Auto
    Items Specifications
    Video Compression JPEG (3 Levels)
    Video Resolution 640 x 480, 320 x 240 (default), 160 x 120
    Buffered Image
    *1About 125 frames (320 x 240) with time display
    (When SD memory card is not inserted.)
    Audio Communication 2-way Half Duplex
    Audio Compression ADPCM 32 Kbps
    Audio Bandwidth 300 Hz—3.4 KHz
    Audio Play Method Play with ActiveX
    Input Encoding Method Encoding with ActiveX
    Audio Input Built-in Microphone or External Microphone Input 
    Te r m i n a l
    Audio Output
    *2Audio Line Output Terminal for External Speaker
    Frame rate
    *3Max. 12 frames/second (640 x 480)
    Max. 30 frames/second (320 x 240 or 160 x 120) 
    						
    							Operating Instructions
    180
    Supported Protocols IPv4/IPv6 Dual-Stack•IPv4:TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, 
    ARP, ICMP, POP3, NTP, UPnP
    TM, IPsec  
    IPv6:TCP, UDP, IP, HTTP, FTP, SMTP, DNS, ICMPv6, 
    POP3, NDP, NTP, IPsec 
    IPsec Feature ESP Encryption, ESP Authentication Transport mode/Tunnel mode
    IKE (Internet Key Exchange)
    IKE (Internet Key 
    Exchange) Pre-Shared Key
    Cipher Algorithm DES-CBC, 3DES-CBC, AES-CBC
    Message-Digest Algorithm HMAC-MD5, HMAC-SHA-1
    Message Transfer 
    Condition Alarm, Timer or Motion Detection
    Image Transfer Method SMTP*
    4, FTP
    Interface 10Base-T/100Base-TX Ethernet RJ-45 connector x  1
    Indicator Display Power/Network Communication/Camera operation/ Ethernet link
    External Microphone Input ø 3.5 mm Mini Jack
    Audio Output ø 3.5 mm Stereo Mini Jack (But output is mono.)
    External I/O External Sensor Input x 2 External Sensor Output x 1
    SD Memory Card Slot Full Size
    Dimension (HWD) 97.5 (3 13/16 inches) mm x 123 (4 13/16 inches)  mm x 123 (4 13/16 inches) mm
    Weight 330   (0.73 lb.) (Only the unit)
    AC adaptor 
    (Model No. BB-HCA2A: 
    Option) Input 120 V AC, 60 Hz
    Output 12 V DC, 0.75 A
    Power Consumption PoE: (48 V, IEEE 802.3af-compliant Power over  Ethernet): About 5.5 W
    AC adaptor: About 5.8 W
    Items Specifications 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Network Camera Bb Hcm403a Operating Instructions