Panasonic Network Camera BB HCM403A Operating Guide

Operating Instructions
81
3.Set each parameter.
 Settings for general users  Settings for guest users
 Clicking [Cancel] takes you back to the previous page without 
saving changes.
Setting Description
User ID List  Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
 The password must be different from the user name....

Operating Instructions
82
4.Click [Save] when finished.
 The new settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
 The General User page is displayed.Setting Description
Access Level An access level is set for each general user. Check each 
feature to enable access to it.
 In the limit time of continuous Motion JPEG setting, set the 
time for changing video (Motion JPEG) to still images for 
each user. (Not permitted, Unlimited, 10 seconds—60 
minutes) In...

Operating Instructions
83
4 Buffering or Transferring Images
4.1 Procedures of Buffering or Transferring 
Images
The procedures from this page to page 117 describe settings of the image buffer 
or transfer. See the procedures below to understand the general outline of the 
settings.
Buffer/Transfer by Timer 
(Page 84)
Transfer Method 
(Select one from the lists.)
 No Transfer, No Memory 
Overwrite
 No Transfer, Memory 
Overwrite
 FTP
 E-mailTransfer Method 
(Select one from the lists.)
 No Transfer,...

Operating Instructions
84
4.2 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
 If you are recording images to the SD memory card, refresh interval slows 
down.
1.Click [Trigger] on the Setup page.
2.Click a No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for the trigger, and click 
[Next>].
 Click [Delete Buffered Images] to delete images already buffered.
 Click [Save] to save the...

Operating Instructions
85
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 67).
 Clicking [].
 Clicking [

Operating Instructions
86
6.Set the image buffer frequency, and click [Next>].
 Clicking [

Operating Instructions
87
7.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
88
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
89
Overwrite 
Setting Selecting [Overwrite File] overwrites the image on the server 
with a newer image. Selecting [Save as New File with Time 
Stamp] saves the image attaching time stamps on the file 
name, and the images are not overwritten.
E.g. image20060101093020500
.jpg
The underlined numbers mean 9h30min20s500ms on 
January 1, 2006. The letter s is inserted after the day when 
referring to a daylight saving time zone.
Data 
Transfer 
Method Select [Passive Mode] normally....

Operating Instructions
90
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [