Panasonic Network Camera BB HCM403A Operating Guide
Here you can view all the pages of manual Panasonic Network Camera BB HCM403A Operating Guide. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
Operating Instructions
111
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
Clicking [](http://img.usermanuals.tech/thumb/58/72301/w300_bb-hcm403_en_om_d-110.png "Page 111
Operating Instructions
111
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
Clicking [")
Operating Instructions 111 When you set [FTP] for Transfer Method Select [FTP], and click [Next>]. The following page is displayed. Clicking [
Page 112
![Page 112
Operating Instructions
112
Overwrite
Setting Selecting [Overwrite File] overwrites the image on the server
with a newer image. Selecting [Save as New File with Time
Stamp] saves the image attaching time stamps on the file
name, and the images are not overwritten.
E.g. image20060101093020500
.jpg
The underlined numbers mean 9h30min20s500ms on
January 1, 2006. The letter s is inserted after the day when
referring to a daylight saving time zone.
Data
Transfer
Method Select [Passive Mode] normally....](http://img.usermanuals.tech/thumb/58/72301/w300_bb-hcm403_en_om_d-111.png "Page 112
Operating Instructions
112
Overwrite
Setting Selecting [Overwrite File] overwrites the image on the server
with a newer image. Selecting [Save as New File with Time
Stamp] saves the image attaching time stamps on the file
name, and the images are not overwritten.
E.g. image20060101093020500
.jpg
The underlined numbers mean 9h30min20s500ms on
January 1, 2006. The letter s is inserted after the day when
referring to a daylight saving time zone.
Data
Transfer
Method Select [Passive Mode] normally....")
Operating Instructions 112 Overwrite Setting Selecting [Overwrite File] overwrites the image on the server with a newer image. Selecting [Save as New File with Time Stamp] saves the image attaching time stamps on the file name, and the images are not overwritten. E.g. image20060101093020500 .jpg The underlined numbers mean 9h30min20s500ms on January 1, 2006. The letter s is inserted after the day when referring to a daylight saving time zone. Data Transfer Method Select [Passive Mode] normally....
Page 113
![Page 113
Operating Instructions
113
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
Clicking [](http://img.usermanuals.tech/thumb/58/72301/w300_bb-hcm403_en_om_d-112.png "Page 113
Operating Instructions
113
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
Clicking [")
Operating Instructions 113 When you set [E-mail] for Transfer Method Select [E-mail], and click [Next>]. The following page is displayed. Clicking [
Page 114
Operating Instructions 114 The letter s is inserted after the day when referring to a daylight saving time zone. Setting Description SMTP Server IP Address or Host Name *1 If you set a server IP address, set 4 numbers (0—255) and 3 periods such as 192.168.0.253. Note that 0.0.0.0 and 255.255.255.255 are not available. Or set a host name (1—255 characters). You can set an IPv6 address. Port No. Enter the number (1—65535). Usually set to 25. Reply E-mail Address *2 Set the senders E-mail...
Page 115
![Page 115
Operating Instructions
115
How to
authenticateThe authentication method can be selected:
[No authentication], [POP before SMTP authentication] or
[SMTP authentication].
POP server authentication may be required by your ISP. In
that case, set POP before SMTP authentication.
No authentication: No authentication when sending an e-
mail.
POP before SMTP authentication: Some SMTP servers
that send e-mails do not have an authentication feature.
Therefore, the camera uses the authentication of a POP...](http://img.usermanuals.tech/thumb/58/72301/w300_bb-hcm403_en_om_d-114.png "Page 115
Operating Instructions
115
How to
authenticateThe authentication method can be selected:
[No authentication], [POP before SMTP authentication] or
[SMTP authentication].
POP server authentication may be required by your ISP. In
that case, set POP before SMTP authentication.
No authentication: No authentication when sending an e-
mail.
POP before SMTP authentication: Some SMTP servers
that send e-mails do not have an authentication feature.
Therefore, the camera uses the authentication of a POP...")
Operating Instructions 115 How to authenticateThe authentication method can be selected: [No authentication], [POP before SMTP authentication] or [SMTP authentication]. POP server authentication may be required by your ISP. In that case, set POP before SMTP authentication. No authentication: No authentication when sending an e- mail. POP before SMTP authentication: Some SMTP servers that send e-mails do not have an authentication feature. Therefore, the camera uses the authentication of a POP...
Page 116
![Page 116
Operating Instructions
116
8.After you confirm the settings and click [Next>], set E-mail notification and
click [Next>].
If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings referring to page 114–115.
9.Click [Save] after confirming the settings.
The new settings are saved.
When finished, Success! is displayed.
Note
If you click [Save], all buffered images on the internal memory and SD memory
card are deleted.
10.Click [Go to Trigger page].
...](http://img.usermanuals.tech/thumb/58/72301/w300_bb-hcm403_en_om_d-115.png "Page 116
Operating Instructions
116
8.After you confirm the settings and click [Next>], set E-mail notification and
click [Next>].
If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings referring to page 114–115.
9.Click [Save] after confirming the settings.
The new settings are saved.
When finished, Success! is displayed.
Note
If you click [Save], all buffered images on the internal memory and SD memory
card are deleted.
10.Click [Go to Trigger page].
...")
Operating Instructions 116 8.After you confirm the settings and click [Next>], set E-mail notification and click [Next>]. If you select [Enable], the E-mail Notification When Triggered page is displayed. Enter the settings referring to page 114–115. 9.Click [Save] after confirming the settings. The new settings are saved. When finished, Success! is displayed. Note If you click [Save], all buffered images on the internal memory and SD memory card are deleted. 10.Click [Go to Trigger page]. ...
Page 117
Operating Instructions 117 If you are buffering images to the internal memory, the following operations also delete all buffered images. – Turning off or restarting the camera. – Updating the camera. – Resetting the camera to default. – Saving the Date and Time page.
Page 118
Operating Instructions 118 4.5 Transferring Camera Images in Transport Mode The camera can transfer images in transport mode by E-mail or FTP. Prepare the following required items: See page 50 and set up the E-mail or FTP server.Item Supported Feature E-mail or FTP ServerOperating System: IPsec supported ISP Service : A service for multiple static global addresses (A global address must be set up to the server.) Camera ISP Service : A service for multiple static global addresses (A global address...
Page 119
Operating Instructions 119 4.6 Transferring Camera Images in Tunnel Mode The camera can transfer images in tunnel mode by E-mail or FTP. Prepare the following required items: See page 53 and set up the E-mail or FTP server.Item Supported Feature VPN Router ISP Service (in IPv4): A service for static global addresses (A global address must be set up to the WAN side.) ISP Service (in IPv6): An IPv4/IPv6 Dual-Stack or IPv6 over IPv4 Tunneling service Camera ISP Service (in IPv4): A service for...
Page 120
![Page 120
Operating Instructions
120
4.7 Setting the Motion Detection
The Motion Detection page allows you to adjust the sensitivity of Motion Detection.
Threshold: If the threshold is set low, this function detects nearly all movements.
Sensitivity: If you set sensitivity high, the amplitude of the motion detection bar gets
jumpy.
1.Click [Motion Detection] on the Setup page.
2.Click the Motion Detection bar in Threshold to set the threshold level.
3.Click the Motion Detection bar in Sensitivity to set the...](http://img.usermanuals.tech/thumb/58/72301/w300_bb-hcm403_en_om_d-119.png "Page 120
Operating Instructions
120
4.7 Setting the Motion Detection
The Motion Detection page allows you to adjust the sensitivity of Motion Detection.
Threshold: If the threshold is set low, this function detects nearly all movements.
Sensitivity: If you set sensitivity high, the amplitude of the motion detection bar gets
jumpy.
1.Click [Motion Detection] on the Setup page.
2.Click the Motion Detection bar in Threshold to set the threshold level.
3.Click the Motion Detection bar in Sensitivity to set the...")
Operating Instructions 120 4.7 Setting the Motion Detection The Motion Detection page allows you to adjust the sensitivity of Motion Detection. Threshold: If the threshold is set low, this function detects nearly all movements. Sensitivity: If you set sensitivity high, the amplitude of the motion detection bar gets jumpy. 1.Click [Motion Detection] on the Setup page. 2.Click the Motion Detection bar in Threshold to set the threshold level. 3.Click the Motion Detection bar in Sensitivity to set the...