Panasonic Network Camera BB HCM403A Operating Guide

Operating Instructions
161
Note
 See page 15 for the Single Camera page.
 If you will enable Internet access to the camera, follow the procedures 
below.
 When you are using a router that supports UPnP™
1.Enable the Auto Port Forwarding feature on the UPnP page (see page 
57)
2.Register with the DynamicDNS service on the DynamicDNS page 
(see page 60)
3.Confirm that the camera can be accessed from the Internet (see page 
11). If you cannot access the camera, see page 10 of Troubleshooting 
on the...

Operating Instructions
162
7.5 Setting Your PC
7.5.1 Setting Proxy Server Settings on a Web Browser 
If a proxy server is not used, these settings are not required. If you are using a 
proxy server, perform the proxy server settings below.
 To communicate with a camera installed within a LAN, changing the web 
browser settings is recommended.
 The firewall of a proxy server in a corporate environment may prevent access 
to the camera. Consult your network administrator.
Note
 A proxy server is used to...

Operating Instructions
163
3.Click the [Connections] tab, and click [LAN Settings].
4.See if the Use a proxy server for your LAN check box is checked or not. If 
checked, click [Advanced...].
 If not checked, click [Cancel]. Proxy settings are not required.
See if this check
box is checked or not.
If checked, 
click [Advanced...]. 

Operating Instructions
164
5.Enter the camera’s IP address into the Do not use proxy server for addresses 
beginning with data field. (Example: 192.168.0.253)
6.Click [OK].
Note
 When accessing the camera via a proxy server, the Talk Button is gray. 
The Talk feature cannot be used. 

Operating Instructions
165
7.5.2 Setting UPnP™ to Display Camera Shortcut in My 
Network Places
To display the camera shortcut in the My Network Places folder, a Windows 
component should be added. Enable UPnP™ (Universal Plug and Play) following 
the steps below.
Note
 This feature is only available when using Windows XP or Windows Me.
7.5.3 Setting the Internet Temporary File Setting on the 
Web Browser
An old image may be displayed. In this case, change the web browser settings 
following the steps...

Operating Instructions
166
7.6 Default Setting List
Basic
Items Default Required Note
Network 
(IPv4)Connection Mode Automatic 
Setup- Automatic 
Setup/Static/
DHCP
Allow Access from the 
Internet (Automatic 
Setup only)No - -
Network Configuration 
from Setup Program 
(Static/DHCP only)Enable - -
Port No. 
(Static/DHCP only)80 - 20, 21, 25 and 
110 is not 
available
*2
IP address 
(Static only)192.168.0.
253When 
setting 
Static*1
Subnet Mask 
(Static only)255.255.
255.0When 
setting 
Static*1
Host Name...

Operating Instructions
167
Network 
(IPv6)Connection Mode Automatic 
Setup- Automatic 
Setup/Static
Allow Access from the 
Internet (Automatic 
Setup only)No - -
Port No. 
(Static only)80 - 20, 21, 25 and 
110 is not 
available*
2.
IP address 
(Static only)[Blank] When 
setting 
Static
*1
Default Gateway (Static 
only)[Blank] When using 
Gateway*1
DNS Server 1
DNS Server 2[Blank] When using 
DNS*1
Max. Bandwidth Usage 
(Mbps)Unlimited - 0.1, 0.2, 0.3, 
0.5, 1 or 
Unlimited
Connection Type Auto...

Operating Instructions
168
Dynamic
DNSDynamicDNS Disable -Viewnetcam.com 
/User-specified 
DynamicDNS/
Disable
DynamicDNS Server 
URL[Blank]When using 
User-specified 
DynamicDNS1—255 
characters*8
Updating time 10 min At the time of 
starting/10, 
30(min), 1, 3, 
6, 12, 24(h)
User Name [Blank] 0—63 
characters
Password [Blank] 0—63 
characters
Date and 
TimeTime Setting AM/PM - AM/PM/24 H
Automatic Time 
AdjustmentNo check When using 
NTP-
NTP Server Address or 
Host Name[Blank] 1—255 
characters
*4...

Operating Instructions
169
Audio Output Enable - -
Volume Standard - Minimum/
Standard/
Maximum
PC Audio Input 
Timeout 1 min - 1, 2, 3, 5, 10, 
20, 30, 60 
(min)
Input Enable - -
Camera Microphone 
SensitivityStandard - Minimum/
Standard/
Maximum Items Default Required Note 

Operating Instructions
170
Account
Items Default Required Note
Security: 
AdministratorGeneral 
AuthenticationDo not 
permit 
access from 
guest users --
User Name [Blank] When setting 
administrator6—15 
characters
*3
Password [Blank] When setting 
administrator6—15 
characters*3
Retype 
Password[Blank] When setting 
administrator6—15 
characters*3
General User User ID List [Blank] - -
User Name [Blank] When setting 
general user6—15 
characters
*3
Password [Blank] When setting 
general user6—15...