Panasonic Network Camera Bb Hce481a Operating Instructions

							Operating Instructions
181
 If the following dialog box is displayed, click [Unblock].
 You can find the camera IP address and port number by looking up the 
MAC address of your camera.
IPv4 Information
IPv6 Information
Note
 When trying to find multiple cameras, the MAC address on the bottom of 
the camera verifies which camera you are setting up.
 See page 183 for details about setup from the MAC address.
Camera 
Status
Camera 
List window
Displays IPv4 or 
IPv6 information. Por t 
No. MAC 
Address
IP 
Address 
						

							Operating Instructions
182
Automatic Setup (Local or Internet Access) or Manual Setup
1.
Click [Execute] on the Camera List window shown on page 181.
2.Click the corresponding button.
Note
 See Getting Started for local and Internet access setup.
Manual Setup window
Set up each parameter referring to page 50—page 52.
 If more than 20 minutes have passed since the camera was turned on, the 
camera cannot be set up from the Setup Program. If the camera cannot 
be set up, restart the camera.Sets up the camera to view on 
the LAN.
Sets up the Internet access to 
the camera.
Manually sets up the camera.
Disables IPsec. If disabled, the 
button is displayed gray.
Displays the Setup page (see 
page 45). 
						

							Operating Instructions
183
 If Camera setup completed is displayed, click [Close] to finish the 
Manual Setup.
3.Close all Setup windows.
Setting up the Camera Using the MAC Address on the Setup 
Program
The Setup Program may not list any cameras due to your firewall or antivirus 
software settings on your PC. If you cannot disable your firewall or antivirus 
software, you can set up the camera using the camera MAC address as shown 
below.
1.Enter the camera MAC address in the data field, and click [Set up camera].
Note
 The cameras MAC address can be found on the sticker affixed to the 
bottom of the camera (see page 9 for BB-HCM381A or page 11 for 
BB-HCE481A).
2.After confirming the network settings, click [OK].
 After about a minute, the Security: Administrator page is displayed. 
						

							Operating Instructions
184
3.Enter the user name and password, and click [Save].
4.The Enter Network Password window is displayed. Enter the user name and 
password that you set above, and click [OK].
5.When the Single Camera page is displayed, the setup is complete.
 If a Security Warning window is displayed, click [Yes] (see page 19).
 See page 20 for Security Warning window when using Microsoft Windows 
XP Service Pack 2. 
						

							Operating Instructions
185
Note
 See page 17 for the Single Camera page.
 If you will enable Internet access to the camera, follow the procedures 
below.
 When you are using a router that supports UPnP™
1.Enable the Auto Port Forwarding feature on the UPnP page (see page 
67)
2.Register with the DynamicDNS service on the DynamicDNS page 
(see page 70)
3.Confirm that the camera can be accessed from the Internet (see page 
13). If you cannot access the camera, see page 10 of the 
Troubleshooting on the CD-ROM.
 When you are using a router that does not support UPnP™
Follow the procedures shown on page 68. 
						

							Operating Instructions
186
7.6 Setting Your PC
7.6.1 Setting Proxy Server Settings on a Web Browser 
If a proxy server is not used, these settings are not required. If you are using a 
proxy server, perform the proxy server settings below.
 To communicate with a camera installed within a LAN, changing the web 
browser settings is recommended.
 The firewall of a proxy server in a corporate environment may prevent access 
to the camera. Consult your network administrator.
Note
 A proxy server is used to protect your network when connected to the Internet.
 The video and audio features cannot be used when the camera is accessed 
through a proxy server requiring authentication.
 If the camera is accessed via a proxy server, problems may occur. Consult your 
network administrator before installing the camera.
 If the camera is accessed via a proxy server, the refresh interval may be 
increased.
How to Set Proxy Server Settings
1.
Start up Internet Explorer. (The example is Internet Explorer 6.0.)
2.Click [Tools] [Internet Options...]. 
						

							Operating Instructions
187
3.Click the [Connections] tab, and click [LAN Settings].
4.See if the Use a proxy server for your LAN check box is checked or not. If 
checked, click [Advanced...].
 If not checked, click [Cancel]. Proxy settings are not required.
See if this check
box is checked or not.
If checked, 
click [Advanced...]. 
						

							Operating Instructions
188
5.Enter the camera’s IP address into the Do not use proxy server for addresses 
beginning with data field. (Example: 192.168.0.253)
6.Click [OK].
Note
 When accessing the camera via a proxy server, the Talk Button is gray. 
The Talk feature cannot be used. 
						

							Operating Instructions
189
7.6.2 Setting UPnP™ to Display Camera Shortcut in My 
Network Places
To display the camera shortcut in the My Network Places folder, a Windows 
component should be added. Enable UPnP™ (Universal Plug and Play) following 
the steps below.
Note
 This feature is only available when using Windows XP or Windows Me.
7.6.3 Setting the Internet Temporary File Setting on the 
Web Browser
An old image may be displayed. In this case, change the web browser settings 
following the steps below.OS Steps
Windows XP [Start] ( [Settings]) [Control Panel] [Add or Remove 
Programs] [Add/Remove Windows Components] Select 
[Networking Services] [Details] Check [UPnP User 
Interface] [OK] [Next] Complete
Windows XP 
Service Pack 2[Start] ( [Settings]) [Control Panel] [Add or Remove 
Programs] [Add/Remove Windows Components] Select 
[Networking Services] [Details] Check [Internet Gateway 
Device Discovery and Control Client] and [UPnP User 
Interface] [OK] Complete
Windows Me [Start] [Settings] [Control Panel] [Add/Remove 
Programs] [Windows Setup] tab Select [Communication]
[Details] Check [Universal Plug and Play] [OK] [OK]
[Restar t] Complete
[Tools] [Internet Options] [General] tab [Settings] in the Temporary 
Internet files Check [Every visit to the page] in the Check for newer versions of 
stored pages [OK] [OK] Complete 
						

							Operating Instructions
190
7.7 ASCII Character Table
(space)
!

#
$
%
&

(
)
*
+
,
-
.
/0
1
2
3
4
5
6
7
8
9
:
;
<
=
>
?
ASCII Character Table
@
A
B
C
D
E
F
G
H
I
J
K
L
M
N
OP
Q
R
S
T
U
V
W
X
Y
Z
[
\
]
^
_`
a
b
c
d
e
f
g
h
i
j
k
l
m
n
op
q
r
s
t
u
v
w
x
y
z
{
|
}
~