Panasonic Network Camera Bb Hce481a Operating Instructions

							Operating Instructions
121
5.Set the image settings, and click [Next>]. 
 Clicking [].
 Clicking [
						

							Operating Instructions
122
7.Set the image buffer frequency, and click [Next>].
fif
 Clicking [
						

							Operating Instructions
123
8.Select the transfer method, and click [Next>].
 Clicking [
						

							Operating Instructions
124
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [
						

							Operating Instructions
125
Overwrite 
Setting Selecting [Overwrite File] overwrites the image on the server 
with a newer image. Selecting [Save as New File with Time 
Stamp] saves the image attaching time stamps on the file 
name, and the images are not overwritten.
E.g. image20050101093020500
.jpg
The underlined numbers mean 9h30min20s500ms on 
January 1, 2005. The letter s is inserted after the day when 
referring to a daylight saving time zone.
Data 
Tr a n s f e r  
Method Select [Passive Mode] normally. If the transfer does not work, 
select [Active Mode] and check the operation.
*1 Note that [Space], [], [], [&], [] are not available.
*2 Note that [] is not available.
Setting Description 
						

							Operating Instructions
126
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [
						

							Operating Instructions
127
Setting Description
SMTP Server IP 
Address or Host 
Name
*1
 If you set a server IP address, set 4 numbers (0—255) and 
3 periods such as 192.168.0.253. Note that 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name 
(1—255 characters).
 You can set an IPv6 address.
Port No.  Enter the number (1—65535). Usually set to 25.
Reply E-mail 
Address
*2 Set the senders E-mail address. We recommend you to 
set the administrators E-mail address.
Destination E-
mail Address
*2
 1—3 Set the destination E-mail address (up to 3).
Subject
*2 Enter a subject with ASCII characters (see page 190) or 
characters from other languages (0—44 characters for a 
1-byte character and 0—22 characters for a 2-byte 
character).
Te x t *
2 Enter text with ASCII characters (see page 190) or 
characters from other languages (0—63 characters for a 
1-byte character and 0—31 characters for a 2-byte 
character). Note that [end-of-line] key is not available. 
						

							Operating Instructions
128
How to 
authenticateThe authentication method can be selected: 
[No authentication], [POP before SMTP authentication] or 
[SMTP authentication].
POP server authentication may be required by your ISP. In 
that case, set POP before SMTP authentication.
 No authentication: No authentication when sending an e-
mail.
 POP before SMTP authentication: Some SMTP servers 
that send e-mails do not have an authentication feature. 
Therefore, the camera uses the authentication of a POP 
server that receives e-mails, before sending e-mails.
– POP3 Server IP 
Address or Host 
Name
*1:If you set a server IP address, set 
4 numbers (0—255) and 3 
periods, such as 192.168.0.253. 
Note that 0.0.0.0 and 
255.255.255.255 are not 
available. Or set a host name (0—
255 characters). 
You can set an IPv6 address.
– Port No.: Enter a number (1—65535). 
Usually set to 110.
– Login ID
*2:If your ISP requires a login ID to 
log in to a POP3 server, set it (1—
63 characters).
– Password
*2:If your ISP requires a password to 
log in to a POP3 server, set it (0—
63 characters).
 SMTP authentication: Users are authenticated by user 
name and password on the SMTP server. Your ISP must 
support the SMTP authentication. The supported SMTP 
authentications of the camera are the LOGIN and PLAIN 
authentications.
– Login ID
*2:If your ISP requires a login ID to 
log in to an SMTP server, set it 
(1—63 characters).
– Password
*2:If your ISP requires a password to 
log in to an SMTP server, set it 
(0—63 characters).
*1 Note that [Space], [], [], [&], [] are not available.
*2 Note that [] is not available.
Setting Description 
						

							Operating Instructions
129
9.After you confirm the settings and click [Next>], set E-mail notification and 
click [Next>].
 If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings referring to page 127–128.
10.Click [Save] after confirming the settings.
 The new settings are saved.
 When finished, Success! is displayed.
11.Click [Go to Trigger page].
 The Trigger page is displayed.
Note
 If you set a short interval when transferring images to a cell phone, many E-
mails will be sent, which may lead to a large phone bill. Therefore, we 
recommend you to set a long interval. 1 image per minute frequency is 
recommended.
 Motion Detection transfer stops operating until after the camera finishes all 
transfers. For example, if the camera transfers 3 images per minute and 6 
images in total, Motion Detection will follow the pattern below.Setting Description
Disable  The camera does not send an E-mail notification when 
buffering or transferring images.
Enable  The camera sends an E-mail notification (up to 3 
destinations) when buffering or transferring images.
Detectable DetectableUndetectable
1st 2nd 3rd 4th 5th 6th120 seconds
A Motion Detection signal is detected. 
						

							Operating Instructions
130
 If you are buffering images to the internal memory, the following operations also 
delete all buffered images.
– Turning off or restarting the camera.
– Updating the camera.
– Resetting the camera to default.
– Saving the Date and Time page.