Panasonic Multimedia Projection Hdtv Pt 56dlx76 Operating Instructions

41
Basic Operation
Lets you choose the aspect mode based on the 
format of the received signal and your preference.
The aspect mode changes each 
time  ASPECT is pressed.Notes:
• When a 1080p (HDMI) signal is received, the aspect is set to 
FULL and cannot be changed.
• When input mode is CARD, the aspect is set to 4:3 and 
cannot be changed.
• If the mode selected does not match the aspect ratio of the 
input signal, the original picture quality may be affected.
• If using this Projection Display in...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo42
Notes:
• Sound from the Left screen is output from the speakers on the 
Projection Display set.
• When the screen is split, signal of the Left screen is output 
from the rear monitor output terminal. (p. 17)
• The left and right screens are processed by individual circuits 
and, therefore, may vary in image quality.
• Split screen returns to single screen when the unit is turned...

43
Basic Operation
Swapping left and right screens
5Video 1
5Video 1
Press to swap.
Note:
• Picture quality may change according to the combination of 
signals input to the left and right screens.
Select desired input mode of the 
Right screen
Press to select the desired input 
mode.
* If SKIP is set as the Input Label setting, the mode will not 
be changed. (p. 65)
TV
Component 1*
Component 2*
Video 2*
Video 1*
Video 3*
Changing the Viewing Condition
Press to change the viewing mode.
5Video 1
5Video 1 

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo44
Press MENU to display the Main Menu screen.
Press to select “Picture” 
icon.
Press to display the Picture 
menu.Press to select each item.
Press to adjust each item.
Picture Adjustments
Normal / Picture / Brightness / Color 
/ Tint / Sharpness / Color temp
Picture
Audio
Timer
Lock
TVG / Photo
Setup
Menu
• Picture Menu is inaccessible when no signal is 
present.
* When a 1080p...

45
Advanced Op er a tion
 
PC Adjust
Press to select “PC adjust”.
Press to display the PC adjust 
menu.1
Press to select each item.
Press to adjust each item.2
Lets you choose one of three pre-set Picture Modes 
that best suits the program to which you are viewing. 
Selecting this feature will also affect Color Temperature 
setting.
• Vivid - This is the default mode, It provides enhanced picture 
contrast and sharpness for viewing in a well-lit room.
• Standard - Recommended for normal viewing...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo46
Advanced Adjust
Press to select “Adv. adjust.”
Press to display the Adv. 
adjust menu.1
Press to select each item.
Press to adjust each item.2
Other Adjust
Press to select “Other adjust”.
Press to display the Other 
adjust menu.1
Press to select each item.
Press to adjust each item.2
Item Explanations
Video NR Reduces noise, commonly called snow. Leave 
off when receiving a strong...

47
Advanced Op er a tion
Audio Ad just ments
Press MENU to display the Main Menu screen.
Press to select “Audio” icon.
Press to display the Audio 
menu.Press to select each item.
Press to adjust each item.
Normal / Bass / Treble / Balance
Item Explanations
Normal Reset Bass, Treble and Balance 
adjustments to factory default settings.
Bass Increase or decrease the bass response.
Treble Increase or decrease the treble 
response.
BalanceEmphasize the left / right speaker 
volume.
• Standard  Emits the...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo48
Notes:
• Sound signals are output from the rear AUDIO OUT and 
DIGITAL AUDIO OUT terminal. (p. 18-19)
• When volume is adjusted or the MUTE button is pressed from 
the Remote Control, a message will be displayed.
Press to select each item.
Press to adjust each item.2
Depending on the signal being input, some menu items may or may not be adjustable and some functions may or 
may not...

49
Advanced Op er a tion
Press to set unit to shut itself off after a preselected 
amount of time.
Notes:
• Pressing the RECALL button with sleep timer set displays 
remaining time.
• The on-screen display will flash 3, 2 and 1 to indicate the last 
three (3) remaining minutes prior to turn off.
Press MENU to display the Main Menu screen.
Press to select “Timer” icon.
Press to display Timer 
menu.
  Sleep Timer Feature
Set Sleep Timer
Press to select “0,” “30,” “60,” 
or “90”.
• Sleep time may be set...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo50
Enter Secret Code
A 4-digit code must be entered to view a blocked 
program or change rating settings.
Press NUMBER keys to enter 
your secret code.
Notes:
• Once ratings are set, restricted tapes or programs cannot be 
accessed unless the secret code is entered.
• Do not forget your  password. If you have forgotten it, 
please contact a service center. This Projection Display...