Panasonic Multimedia Projection Hdtv Pt 56dlx76 Operating Instructions

21
Getting Start edHow to connect the  HDMI input terminal
HDMI OUT HDMI OUTAUDIO IN
Recommended HDMI Connections
Follow the connection diagrams below for HDMI 
control of a single AV equipment such as a Panasonic 
DIGA-DVD recorder, RAM Theater or Player Theater 
system. Refer to page 68 for Setup Menu settings and 
additional control information.
• Optional HDMI and/or optical cables are not provided.
If connection (or setting) of equipment compatible with 
HDMI control is changed, switch the power of...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo22

23
Getting Start ed
By inputting a High-bandwidth Digital Content Protection high-definition picture source to the HDMI IN terminals of 
this Projection Display, high-definition pictures can be displayed on the screen in their digital form. (This terminal is 
for use with HDMI equipped DVD players, Set top boxes and D-VHS machines.)
Notes:
• Select the HDMI input position by pressing the TV/VIDEO button. (p. 37)
• The HDMI IN terminals can only be used with 1080i, 1080p, 720p, 480p and 480i picture...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo24
How to connect the  PC IN Terminals
Notes:
• Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) (Not 
included) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible 
D-SUB 15P terminal.
• The computer shown in the illustration is for example purposes only....

25
Getting Start edRGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed 
correctly, or a black background may be displayed.
Notes:
• A vertical frequency of 60 Hz (signal with a * mark) is recommended.
• To view a WXGA picture, a setting change is necessary. Please refer to “PC Adjust” on page 45.
• The D-SUB 15P connector can accept RGB (H-V sync...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo26
Always be sure to follow the procedure given below to 
turn the Projection Display power ON and OFF.
• The lamp cooling fan will continue to operate for 
approximately 1 minute after the power is turned off. During 
this time, the POWER indicator will blink Red.
Press  POWER on Projection Display or Remote Control 
to turn power on.
The Power Indicator blinks Green for about 15...

27
Basic Operation
For your convenience, First Time Set up menu will 
be displayed on screen when the set is turned on 
for the first time. If needed, follow the menus and 
procedures displayed on-screen for setting up the 
features.
Auto program
You can scan All (Analog and Digital) channels. If 
needed, follow the menus and procedures displayed 
on-screen for setting up the features. You can also make 
the settings in Setup menu.
First Time Setup
Language
The language of the on-screen display is set to...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo28
Notes:
• After “Auto program” is completed the unit tunes to the first 
channel found during “Auto program”.
• If setup is incomplete, check connection of Antenna/Cable to 
the RF IN Terminal, then try “Auto program” again. (p. 33-34)
• “Auto program” must be done when you select the input 
signal for the first time or whenever you change the antenna 
configuration.
• Depending on...

29
Basic Operation
Caution:
• In order to begin receiving listings, turn the TV off when not 
in use. Within 24 hours, you will begin to receive TV show 
listings. It may take up to six days to receive the full eight 
days of initial show listings.

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo30
Pressing MENU displays the Main 
Menu screen.Press to return to previous level menu.
Press Press to display Main menu.
Example:
If RETURN is pressed from Adv. adjust Menu:
Button operation during 
Menu display (Menu navigation)
to exit menu.
Basic Menu Navigation
• Depending on the signal being input, some items 
may or may not be adjustable and some functions 
may or may not be...