Panasonic Multimedia Projection Hdtv Pt 44lcx65 Operating Instructions

21
Getting Start edRGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed 
correctly, or a black background may be displayed. In this case, “signal” will flash on-screen for about 5 
seconds.
Notes:
• Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.
• The D-SUB15P connector can accept RGB (H-V sync...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo22
How to connect the  HDMI input terminal
HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standard, 
enhanced and high definition video format as well as all existing multi-channel audio formats. One jack supports 
both video and audio information. The HDMI/HDCP*
1 input can be connected to an EIA/CEA 861/861B*2 compliant 
consumer...

23
Getting Start ed
By inputting a High-bandwidth Digital Content Protection high-definition picture source to the HDMI IN terminals of 
this Projection Display, high-definition pictures can be displayed on the screen in their digital form. (This terminal is 
for use in the future when High-bandwidth Digital Content Protection DVD players and D-VHS are put on the market.)
Notes:
• Select the HDMI input position by pressing the TV/VIDEO button. (P. 32)
• The HDMI IN terminals can only be used with 1080i,...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo24
POWER
SAP
LIGHT
MENU
123
45
6
78
09
RETURN
CH
CH VOL VOL
R-TUNE
REW
TV/VCRSPLIT       SWAP
DVD/VCR CH
OPEN/CLOSE
PLAY
PA U S E S T O P R E CFF
PROG
TV/VIDEOSLEEP EXIT
TV VCR DVD
DTV RCVR
DBS/CBLAUX
OK
MUTE     ASPECT    FAVORITE    RECALL
Always be sure to follow the procedure given below to 
turn the Projection Display power ON and OFF.
• The lamp cooling fan will continue to...

25
Basic Operation
For your convenience, First Time Set up menu will 
be displayed on screen when the set is turned on 
for the first time. If needed, follow the menus and 
procedures displayed on-screen for setting up the 
features.
Auto program
You can scan All (Analog and Digital) channels. If 
needed, follow the menus and procedures displayed 
on-screen for setting up the features. You can also make 
the settings in Setup menu.
Notes:
• After “Auto program” is completed the unit tunes to the first...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo26
POWER
SAP
LIGHT
MENU
123
45
6
78
09
RETURN
CH
CH VOL VOL
R-TUNE
REW
TV/VCRSPLIT       SWAP
DVD/VCR CH
OPEN/CLOSE
PLAY
PA U S E S T O P R E CFF
PROG
TV/VIDEOSLEEP EXIT
TV VCR DVD
DTV RCVR
DBS/CBLAUX
OK
MUTE     ASPECT    FAVORITE    RECALL
Pressing MENU displays the Main 
Menu screen.
Press to select the desired 
icon. Press to return to previous level menu.
PressEXITMENU
RETURN...

27
Basic Operation
Picture
Normal             No
Pic. Mode        Vivid
Picture           +10
Brightness        +10
Color             +10
Tint              +10
Sharpness         +10
Picture
Normal             No  
Pic. Mode        Vivid
Picture           +10
Brightness        +10
Color             +10
Tint              +10
Sharpness         +10
Press to enter the menu.
Press to select desired menu 
item.
Press to adjust or set desired 
menu item.
Other Adjust sub-menu.
Press to select Other Adjust.
Press...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo28
POWER
SAP
LIGHT
MENU
123
45
6
78
09
RETURN
CH
CH VOL VOL
R-TUNE
REW
TV/VCRSPLIT       SWAP
DVD/VCR CH
OPEN/CLOSE
PLAY
PA U S E S T O P R E CFF
PROG
TV/VIDEOSLEEP EXIT
TV VCR DVD
DTV RCVR
DBS/CBLAUX
OK
MUTE     ASPECT    FAVORITE    RECALL
Tuning channels
Switching languages for display
Allows you to select the language used for On 
Screen Displays.
Press MENU to display the Main...

29
Basic Operation
Automatically searches and adds receivable 
channels to memory.
Press MENU to display the Main Menu screen.
Press to select “Setup” icon.
Press to display the Setup 
menu.
Press to display the Program 
channel menu. Press to select “Program 
channel”.
Press to select “Auto”.
1
Automatic program setting
2
3
Press to enter the Auto menu.Notes:• If “Cable” or “Antenna” is selected and a CableCARDTM is not 
inserted, Auto program will perform Scan All. 
• If “Cable” is selected and a...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo30
Use this procedure when changing setting of 
receiving channels or changing the channel dis play.
Also, use to add or delete channels from channel list 
manually.
Manual program setting
Press MENU to display the Main Menu screen.
Press to select “Setup” icon.
Press to display the Setup 
menu.
Press to select “Manual”.
1
2
3
Press to enter the Manual 
program screen.
Picture
Audio...