Panasonic Multimedia Projection Hdtv Pt 44lcx65 Operating Instructions

11
Getting Start edRear View 
Vent
Notes:
• Make sure the vents are not blocked. (This could cause damage.)
• Indication on the back panel may change without notice.
Vent
1CableCARD™ 
INTERFACEInsert CableCARD™.
2VHF/UHF Cable InInput terminal for an antenna 
or cable box signal.
3DIGITAL AUDIO OUTOutput audio signal (Digital)
4 
HDMI Input 
Terminal 1Audio/
Video 1Connect from other 
component. (HDMI 1)
5Audio 1Connect from other 
component. (HDMI 1) (P. 22)
6HDMI Input 
Terminal 2*Audio/
Video 2Connect...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo12
Antenna Connection 
VHF/UHF Cable In terminal on the 
back of the Projection Display
Connecting the Antenna / Cable to the RF IN Terminal
When using “Nut type” RF coaxial cable, tighten with fingers only. Overtightening may damage terminal.
• Turn off the power supply for all com po nents before making any connections.
• If the cables necessary for connecting a component to the...

13
Getting Start edFor proper reception of analog or digital cable channels, a cable service connection is required.
Cable Connection
Cable Box
Terminal on the back of the 
Cable Box
In from cableConnect the cable from the antenna or 
cable system to the VHF/UHF Cable In 
terminal on the back of the Projection 
Display.
OrIn from cable
Use this confi guration when connecting the projection display to a cable TV system.
Notes:
• Certain cable systems offset some channels to reduce interference or have...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo14
  CableCARD™ Connection
This module (also called Point of Deployment (POD) module or Digital Cable Module (DCM)) allows you to 
tune digital and high definition cable channels through the cable antenna. Contact your local cable company 
for information regarding the availability and costs of CableCARD™ related services.
Notes:
• A Digital Cable Subscription is required.
• Do not...

15
Getting Start edHow to connect the “1, 2, 3”  Input Terminals
Connects  VCRs and other peripheral equipment
Similar connections are available at the INPUT 1, 2, 3 input terminals. (PP. 10-11)
Notes:
• Select the desired VIDEO input position by pressing the TV/VIDEO button. (P. 32)
• When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video input 
terminal are connected at the same time.
Similar connections are available at the INPUT 1, 2, 3...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo16
How to con nect the  COMPONENT VIDEO Input Terminals
Notes:
• Select the desired COMPONENT VIDEO INPUT position by pressing the TV/VIDEO button. (P. 32)
• Component video signals that can be input are 480i, 480p, 720p, and 1080i.
Because each  Y, PB, and PR signal is input independently, the Component signal allows for more accurate 
color reproduction.
The Component signal output...

17
Getting Start edHow to connect the AV OUT Terminals
Recording Equipment
(S-VHS /VHS VCR)
VIDEO
AUDIO You can connect a  VCR to the AV OUT terminal to record the program you are viewing on-screen. An 
external monitor can also be connected to the AV OUT terminals. Connect the VCR as shown below.
Notes:
• This unit contains Video and Audio Outputs for the purpose of recording television programming to VCR. Due to license 
restrictions, if a device (STB, DVD, etc.) is connected to the HDMI input of the...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo18
How to connect the Amplifier
Analog Audio Out
 Stereo  System 
(A Stereo Amplifier and Speakers) 
AUDIO To listen to the audio through a separate stereo system, connect an external audio amplifier to AUDIO OUT 
on back of unit.
Notes:
• AUDIO OUT terminals cannot be connected directly to external speakers.
• AV terminals will not output Component Video, PC/HDMI IN or SD card...

19
Getting Start ed
/04)#!,
Firmly connect 
the cable to 
the connector.
Connect three or 
more speakers for 
surround sound. Speakers (example) Use the diagram below to connect the Digital  Audio Output of your Projection Display to a Dolby Digital 
decoder.
  Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete 
full-bandwidth channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency 
Effect)...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo20
RGB OUT AUDIO OUT
COMPUTER
How to connect the  PC IN Terminals
Notes:
• Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) (Not 
included) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible 
D-SUB 15P terminal.
• The computer shown in the illustration is...