Panasonic Multi Format Monitor Bt H1700p Operating Instructions

ENGLISHModel BT-H1700P
Before attempting to connect, operate or adjust this product, please rea\
d thess instructions completly.
Operating
LCT1110-001A 
1001-PN-I-U-VP
VOLUMESLOT 1AB
DEGAUSS
MENU SCREENS
CHECK ASPECT
AREA
MARKER
UNDER
SCAN PULSE
CROSS COLOR
OFFSLOT 2C DSLOT 3 POWERE
FINPUT SELECT
Printed in Japan 
VQT9586
Multi-Format Monitor
Instructions
P 

SCREEN BURN
● It is not recommended to keep a certain still image
displayed on screen for a long time as well as displaying
extremely bright images on screen. This may cause a
burning (sticking) phenomenon on the screen of cathode-ray
tube. This problem does not occur as far as displaying
normal video playback motion images.
 PRECAUTIONS
● Use only the power source specified on the unit.
(120 V/ AC, 60 Hz)
● Keep flammable material, water, and metal objects away
from the unit – especially the interior...

ENGLISH
3
SAFETY PRECAUTIONS ........................................................................ 2
CONTROLS AND FEATURES ................................................................ 4
CONTROLS AND FEATURES
(INPUT CARD: OPTIONAL) .................................................................... 6
PREPARATION ....................................................................................... 8
BASIC MENU OPERATIONS
(MAIN MENU, SETUP MENU)...

CONTROLS AND FEATURES
FRONT VIEW

Tally lamp
Lights when the tally control signal is ON. The tally control
signal is input through the MAKE remote terminal. For
details, refer to Page 17.
PHASE adjustment knob
Adjusts picture hue. Turn the knob to the left to make the
picture redder, and turn it to the right to make the picture
greener.
CHROMA adjustment knob
Adjusts picture colour density. Turn the knob to the left to
make the picture colour lighter, and turn it to the right to
make the picture colour...

ENGLISH
REAR/SIDE VIEW

COLOR OFF button/lamp
Press the COLOR OFF button. The button lights and the
screen becomes monochrome. When the COLOR OFF
button is pressed while lit, the light goes off and the
normal screen is restored.
Use this function to confirm the noise in the brightness
signal or to confirm the white balance.
NOTE: This function is invalid with the RGB-input screen.
SCREENS CHECK button/lamp
Press the SCREENS CHECK button. The button lights
and the screen changes in the following order:...

Video input/output terminals
Input (IN) and output (OUT) terminals for component
(colour deference) or RGB signals.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Select component signal : press INPUT SELECT A/C/E
button
Select RGB signal : press INPUT SELECT B/D/F
button
Synchronised signal input/output terminals
Input (IN) and output (OUT) terminals for the vertical,
horizontal or complex synchronised...

ENGLISH
SDI INPUT CARD (OPTIONAL: BT-YA703P)
AUDIO 2
AUDIO 1
OUT
IN
SWITCHED
OUT
SDI 1
SDI 2
IN
IN
1
2
3
4
Output terminal for a selected component
serial digital signal
Output terminal for s selected digital signal (the input
displayed on the screen). The output signal is cable-
compensated.
NOTE:When the monitor’s power is OFF, no digital
signal is output.
Input terminals for component serial digital
signals
Input terminals for the digital signal.
Select SDI 1 : press INPUT SELECT A/C/E button
Select...

PREPARATION
1. T urn off the Multi-Format Monitor ’s main
power and unplug the power cable from the A C outlet.
2. Unscrew the screws and remove the slot cover from the slot (on the rear side of themonitor) in which you are going to installthe card.
3.Inser t the Input Car d’s boar d (green-
coloured) into the slot, fitting the board into the guide rails on the top and bottomof the slot.
4. Push the Input Card in so that its frontpanel touc hes the monitor ’s rear panel.
5. Secure the Input Card by...

ENGLISH
BASIC MENU OPERATIONS
(MAIN MENU, SETUP MENU)
ABOUT MENU SCREENS
This monitor features a MAIN MENU (main menu screen) and
a SETUP MENU (setup menu screen).
The MAIN MENU contains the functions normally used, and
the SETUP MENU contains the settings required for initial
setup.
    
FUNCTION SETTING
PICTURE SUB ADJ.
COLOR TEMP/BAL. 
SIZE/POSI.ADJ.
DISTORTION ADJ.
STATUS DISPLAY
CONTROL LOCK      :ON
 all reset
EXIT: 
MENU ENTER:+ SELECT:
     
APERTURE CONTROL
SLOT CONDITION
sub menu POSITION...

HOW TO USE “MAIN MENU”
“MAIN MENU” ITEMS
The following items appear in MAIN MENU.
ItemsFunctionsDisplays
1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal.*1
2 SLOT CONDITION Displays the status of the input cards installed in each of the input card slots.
3 sub menu POSITION Selects the display position of the sub menu superimposed on the screen.
4 AREA MARKER Selects the size marker for the other screen ratio used when the screen
ratio is 16:9.*2
5 AREA MARKER-R...