Panasonic Multi Format Monitor Bt H1700ae Operating Instructions

Operating
Instructions
Multi-Format Monitor
Model BT-H1700AE
Before attempting to connect, operate or adjust this product, please read these instructions completely.
BEDIENUNGSANLEITUNG : MULTI-SYSTEM-MONITOR
MANUEL D’INSTRUCTIONS : MONITEUR MULTI-FORMAT
MANUALE DI ISTRUZIONI : MONITOR MULTI-FORMATI
INSTRUCCIONES : MONITOR MULTIFORMATO
VOLUMESLOT 1A
B DEGAUSS
MENU
BLUE
CHECKASPECT
AREA
MARKER UNDER
SCANPULSE
CROSSCOLOR
OFFSLOT 2C
DSLOT 3POWERE
FINPUT SELECTMUTING
 LCT1261-001A (EN)02.6.25, 12:25 PM 1 

 LCT1261-001A (EN)02.6.25, 12:25 PM 2 

ENGLISH
OPERATING INSTRUCTIONS
MULTI-FORMAT MONITOR
BT-H1700AE
Thank you for purchasing this Panasonic multi-format monitor. Before using
it, read and follow all instructions carefully to take full advantage of the
monitor’s capabilities.
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet. Retain this information
for future reference.
Serial No. :Model No. :BT-H1700AE
SAFETY PRECAUTIONS ........................................................................ 2...

EMC Supplement
This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This
equipment is designed for professional video appliances and can be used in the following environments:
●Controlled EMC environment (for example purpose built broadcasting or recording studio), and the rural outdoors
environment (far away from railways, transmitters, overhead power lines, etc.)
In order to keep the best performance and furthermore for...

ENGLISH
Fuse
3
Caution for AC Mains Lead
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and the other one is only for
U.K.
Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable.
FOR CONTINENTAL EUROPE, ETC.
Not to be used in the U.K.FOR U.K. ONLY
If the plug supplied is not suitable for your socket
outlet, it should be cut off and appropriate one...

CONTROLS AND FEATURES
FRONT VIEW

Tally lamp
Lights when the tally control signal is ON. Set the MAKE/
TRIGGER terminal’s tally control in the REMOTE
(external control) terminal setup menu.  For details, refer
to Page 19.  The lamp color can be set to red or green.
To set the color, use TALLY SELECT in the FUNCTION
SETTING setup menu or MAKE/TRIGGER in the
REMOTE (external control) terminal setup menu.  For
details, refer to Page 15 and 19.
PHASE adjustment knob
Adjusts picture hue. Turn the knob to the...

ENGLISH
COLOR OFF button/lamp
Press the COLOR OFF button. The button lights and the
screen becomes monochrome. When the COLOR OFF
button is pressed while lit, the light goes off and the
normal screen is restored.
Use this function to confirm the noise in the brightness
signal or to confirm the white balance.
NOTE: This function is invalid with the RGB-input screen.
SCREENS CHECK button/lamp
Press the SCREENS CHECK button. The button lights
and the screen changes in the following order:
Normal screen[Red...

Video input/output terminals
Input (IN) and output (OUT) terminals for component
(colour difference) or RGB signals.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Select component signal : press INPUT SELECT A/C/E
button
Select RGB signal : press INPUT SELECT B/D/F
button
Synchronised signal input/output terminals
Input (IN) and output (OUT) terminals for the vertical,
horizontal or complex synchronised...

ENGLISH
SDI INPUT CARD (OPTIONAL: BT-YA703P)
AUDIO 2
AUDIO 1
OUT
IN
SWITCHED
OUT
SDI 1
SDI 2
IN
IN
1
2
3
4
Output terminal for a selected component
serial digital signal
Output terminal for a selected digital signal (the input
displayed on the screen). The output signal is cable-
compensated.
NOTE:When the monitor’s power is OFF, no digital
signal is output.
Input terminals for component serial digital
signals
Input terminals for the digital signal.
Select SDI 1 : press INPUT SELECT A/C/E button
Select...

PREPARATION
1. Turn off the Multi-Format Monitor’s main
power and unplug the power cable from
the AC outlet.
2. Unscrew the screws and remove the slot
cover from the slot (on the rear side of the
monitor) in which you are going to install
the card.
3. Insert the Input Card’s board (green-
coloured) into the slot, fitting the board
into the guide rails on the top and bottom
of the slot.
4. Push the Input Card in so that its front
panel touches the monitor’s rear panel.
5. Secure the Input Card by...