Panasonic Multi Format Monitor Bt H1700ae Operating Instructions
Have a look at the manual Panasonic Multi Format Monitor Bt H1700ae Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Operating Instructions Multi-Format Monitor Model BT-H1700AE Before attempting to connect, operate or adjust this product, please read these instructions completely. BEDIENUNGSANLEITUNG : MULTI-SYSTEM-MONITOR MANUEL D’INSTRUCTIONS : MONITEUR MULTI-FORMAT MANUALE DI ISTRUZIONI : MONITOR MULTI-FORMATI INSTRUCCIONES : MONITOR MULTIFORMATO VOLUMESLOT 1A B DEGAUSS MENU BLUE CHECKASPECT AREA MARKER UNDER SCANPULSE CROSSCOLOR OFFSLOT 2C DSLOT 3POWERE FINPUT SELECTMUTING LCT1261-001A (EN)02.6.25, 12:25 PM 1
ENGLISH OPERATING INSTRUCTIONS MULTI-FORMAT MONITOR BT-H1700AE Thank you for purchasing this Panasonic multi-format monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Serial No. :Model No. :BT-H1700AE SAFETY PRECAUTIONS ........................................................................ 2 CONTROLS AND FEATURES ................................................................ 4 CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) .................................................................. 6 PREPARATION ....................................................................................... 8 BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) ............................................................ 10 HOW TO USE “MAIN MENU”............................................................... 11 HOW TO USE “SETUP MENU”............................................................ 14 HOW TO USE EXTERNAL CONTROL ................................................. 19 TROUBLESHOOTING ........................................................................... 21 SELF-CHECK INDICATIONS .............................................................. 23 SPECIFICATIONS ................................................................................. 24 CONTENTS LCT1261-001A (EN)02.6.25, 12:25 PM 3
EMC Supplement This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional video appliances and can be used in the following environments: ●Controlled EMC environment (for example purpose built broadcasting or recording studio), and the rural outdoors environment (far away from railways, transmitters, overhead power lines, etc.) In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use cables not exceeding the following length: The inrush current of this apparatus is 20.1 ampere. Caution When in case that the strong electromagnetic waves or magnetism is near the audio cable or the signal cable, the sound or the picture will contain noise. In such case, please keep the cable away from the sources of the disturbance. SCREEN BURN ● It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does not occur as far as displaying normal video playback motion images. PRECAUTIONS ● Use only the power source specified on the unit. (230 V AC, 50 Hz/60 Hz) ● Keep flammable material, water, and metal objects away from the unit – especially the interior of the unit. ● This unit incorporates high voltage circuitry. For your own safety and that of your equipment, do not attempt to modify or disassemble this monitor. There are no user-serviceable parts inside. ● Video or audio signals cannot be input to this monitor without optional input cards. ● In these instructions, all explanations (except where noted) refer to the BT-H1700AE with input cards installed. HANDLING ● Avoid shocks or vibrations. These may damage the unit and cause it to malfunction. ● Do not block the ventilation slots. ● Do not expose this unit to high temperatures. Extended exposure to direct sunlight or a heater could deform the cabinet or cause the performance of internal components to deteriorate. ● Do not place the unit near appliances generating strong electric or magnetic fields. They can generate picture noise and instability. ● Keep the monitor clean by wiping the cabinet and CRT screen with a piece of soft cloth. Do not apply thinner or benzine. These chemicals can damage the finish and erase printed letters. When the unit is excessively dirty, use a diluted neutral cleanser, then wipe away the cleanser with a dry cloth. DEGAUSS ● Do not use a magnet eraser to degauss the monitor’s cathode ray tube from the outside. Doing so may distort its aperture grill and cause a malfunction. In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions. WARNINGS To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service personnel. Never try to service it yourself.Improper operations, in particular alternation of high voltage or changing the type of tube may result in x-ray emission of considerable dose. A unit altered in such a way no longer meets the standards of certification, and must therefore no longer be operated. SAFETY PRECAUTIONS 2 WARNING : THIS APPARATUS MUST BE EARTHED. Cable Length Power cord (attached cable) 2.0 m Video signal cable (coaxial cable) 2.0 m Y/C signal cable (shielded cable) 3.0 mCable Length Audio signal cable (shielded cable) 1.0 m D-sub 9-pin cable (shielded cable) 1.5 m D-sub 15-pin cable (shielded cable) 1.0 m LCT1261-001B (EN)02.07.30, 10:13 AM 4
ENGLISH Fuse 3 Caution for AC Mains Lead FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and the other one is only for U.K. Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable. FOR CONTINENTAL EUROPE, ETC. Not to be used in the U.K.FOR U.K. ONLY If the plug supplied is not suitable for your socket outlet, it should be cut off and appropriate one fitted. FOR U.K. ONLY This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark AA or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET. If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified electrician. WARNING: THIS APPLIANCE MUST BE EARTHED. IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: Green-and-Yellow : Earth Blue : Neutral Brown : Live For Your Safety As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: • The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW. • The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. • The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED. How to replace the fuse 1. Open the fuse compartment with a screwdriver. 2. Replace the fuse. LCT1261-001B (EN)02.07.30, 10:13 AM 5
CONTROLS AND FEATURES FRONT VIEW Tally lamp Lights when the tally control signal is ON. Set the MAKE/ TRIGGER terminal’s tally control in the REMOTE (external control) terminal setup menu. For details, refer to Page 19. The lamp color can be set to red or green. To set the color, use TALLY SELECT in the FUNCTION SETTING setup menu or MAKE/TRIGGER in the REMOTE (external control) terminal setup menu. For details, refer to Page 15 and 19. PHASE adjustment knob Adjusts picture hue. Turn the knob to the left to make the picture redder, and turn it to the right to make the picture greener. CHROMA adjustment knob Adjusts picture colour density. Turn the knob to the left to make the picture colour lighter, and turn it to the right to make the picture colour deeper. BRIGHT adjustment knob Adjusts picture brightness. Turn the knob to the left to make the picture darker, and turn it to the right to make the picture brighter. CONTRAST adjustment knob Adjusts picture contrast. Turn the knob to the left to make the picture contrast lower, and turn it to the right to make the picture contrast higher. VOLUME buttons Adjusts the speaker volume. Pressing this button displays the VOLUME level bar on the screen. Pressing the button again allows you to adjust speaker volume. MUTING button Pressing this button mutes the input sound. MUTING ON is displayed on the screen. Pressing the VOLUME –/+ button or the MUTING button restores the sound. MUTING OFF is displayed on the screen. On-screen indications disappear after three seconds. NOTE: The MUTING button functions even when nothing is displayed on screen (such as Main, Setup Menu, or Volume level bar ). In this case, MUTING OFF will not be displayed when the VOLUME –/+ button is pressed. 18 2 3 4 5 6 7 9 EMBEDDED AUDIO channel switch button Pressing this button switches the input sound channel. When the button is pressed, the channel is advanced. When the button is pressed, channel is reversed. NOTE: The channel indication will display a channel from the group selected in the EMBEDDED setup section of the FUNCTION SETTING menu. It is valid when an input card compliant with EMBED- DED AUDIO is installed. Menu select buttons Selects menu screen items or set-up menu screen. MENU button Displays, adjusts or closes a menu screen. DEGAUSS button/lamp Press the DEGAUSS button. The button lights and degaussing is performed automatically. When the degaussing is completed, the light goes off. UNDER SCAN button/lamp Press the UNDER SCAN button. The button lights and the screen is reduced (under-scan) and the whole screen is displayed. When the UNDER SCAN button is pressed while lit, the light goes off and the screen returns to normal size (over-scan). Use this function to check the whole screen. NOTE: This function is invalid with the RGB-input screen. PULSE CROSS button/lamp Press the PULSE CROSS button. The picture is separated into 4 parts. The synchronised signal displayed in the shape of a cross separating the parts. The screen automatically brightens to make it easier to confirm synchronised sections easy. When the PULSE CROSS button is pressed while lit, the light goes off and the normal screen is restored. NOTE: This function is invalid with the RGB-input screen. 10 11 4 VOLUME SLOT 1 A B DEGAUSS MENU SCREENS CHECKASPECT AREA MARKER UNDER SCANPULSE CROSSCOLOR OFF SLOT 2 C D SLOT 3POWER E FINPUT SELECT VOLUMESLOT 1A B DEGAUSS MENU BLUE CHECKASPECT AREA MARKER UNDER SCANPULSE CROSSCOLOR OFFSLOT 2C DSLOT 3POWERE FINPUT SELECT 23458711121314 1096151617 18192021222324251 MUTING 12 13 !! LCT1261-001A (EN)02.6.25, 12:25 PM 6
ENGLISH COLOR OFF button/lamp Press the COLOR OFF button. The button lights and the screen becomes monochrome. When the COLOR OFF button is pressed while lit, the light goes off and the normal screen is restored. Use this function to confirm the noise in the brightness signal or to confirm the white balance. NOTE: This function is invalid with the RGB-input screen. SCREENS CHECK button/lamp Press the SCREENS CHECK button. The button lights and the screen changes in the following order: Normal screen[Red screen[Green screen Blue screenp Press the SCREENS CHECK button when the blue screen is displayed. The light goes off and the normal screen is restored. Use this function to confirm or adjust CHROMA or PHASE. NOTE: This function is invalid with the RGB-input screen. ASPECT button/lamp When the ASPECT button is pressed while the screen ratio is 4:3, the button lights and the screen ratio changes to 16:9. When the ASPECT button is pressed while lit, the light goes off and the normal screen is restored. NOTE: This function is invalid with the RGB-input screen. AREA MARKER button/lamp When the AREA MARKER button is pressed while the screen ratio is 16:9, the button lights and the white marker is displayed. This shows the screen size (area) set on the menu. When the AREA MARKER button is pressed while lit, the light goes off and the normal screen is restored. NOTE: This function is invalid with the RGB-input screen. –INPUT SELECT buttons/lamps Press the unlit button. The button lights and the input signal is changed. (any other lit button goes off.) When the lit button is pressed, the status of the current input signal is displayed (for approx. 3 seconds). Buttons A through F correspond to the signals input via the input cards installed in SLOT 1 through SLOT 3. A, B : selects the audio and the video from the SLOT 1 input card. C,D : selects the audio and the video from the SLOT 2 input card. E,F : selects the audio and the video from the SLOT 3 input card. 14Refer to pages 6 and 7 for correspondence between the input terminals and the INPUT SELECT buttons. Power lamp Unlit : The main power is OFF. Orange : The main power is ON, but the monitor’s power is OFF (in stand-by mode). Green : The main power is ON, and the monitor’s power is ON (in normal operation mode). POWER switch Press the power switch to turn the monitor’s power ON or OFF when the main power is ON. NOTE:When RUSH DELAY TIME is set to SLOW in the set-up menu, it takes approx. 3.2 seconds for the power to actually turn ON after the power switch is pressed. REMOTE (external control) terminals Terminals for controlling the monitor from an external unit. MAKE/TRIGGER terminal (Upper): Enables the monitor to be controlled by closing the circuit (point of contact) connected to the terminal. RS-232C terminal (Lower): Enables the monitor to be controlled from a personal computer via serial communication. Input card slots (SLOT 1 — SLOT 3) Optional input cards can be installed in these slots. Input cards are not provided when you purchase the monitor. NOTE:It is not possible to input video or audio signals to the monitor when no input cards are installed. Main power switch Press the switch to turn the main power ON or OFF. When the main power is ON, the power lamp on the front panel lights in yellow and the monitor enters the stand-by mode. I : ON : OFF AC inlet Power input connector. Connect the provided AC power cord to an AC outlet (230 V AC, 50 Hz/60 Hz). * Attach the provided Power Cord Holder to the AC inlet to prevent accidental disconnection of the AC power cord. Refer to page 9 for details. Built-in speaker (monaural) Outputs the selected INPUT audio signal. 15 16 17 1823 24 25 26 27 28 29 30 [ 5 REAR/SIDE VIEW MAKE SLOT1 RS-232C REMOTE SLOT2 SLOT3 26 27 28 29 MAIN POWER 30 LCT1261-001A (EN)02.6.25, 12:25 PM 7
Video input/output terminals Input (IN) and output (OUT) terminals for component (colour difference) or RGB signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) Select component signal : press INPUT SELECT A/C/E button Select RGB signal : press INPUT SELECT B/D/F button Synchronised signal input/output terminals Input (IN) and output (OUT) terminals for the vertical, horizontal or complex synchronised signals. Function differs depends on the SYNC SELECT setting in the FUNCTION SETTING setup menu. For details, refer to Page 15. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) Audio input/output terminals Input (IN) and output (OUT) terminals for audio signals. The IN and OUT terminals are bridge-connected. Connection terminal (to a Multi-Format Monitor) Attach to the connection terminal of your Multi-Format Monitor. 1 CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) COMPONENT/RGB INPUT CARD (OPTIONAL: BT-YA702P) Compatible signal formats: NTSC (3.58 MHz), PAL (4.43 MHz), black-and-white (50 Hz/60 Hz) * You can select “AUTO” (automatic selection), “NTSC” or “PAL” in SETUP MENU when switching NTSC or PAL. Normally select AUTO. However, if the input signal is unstable, select NTSC or PAL. B/PB/B-Y G/Y OUT IN OUT INR/PR/B-Y OUT IN VD OUT IN HD/CS OUT IN OUT IN AUDIO OUT IN 1 2 3 4 VIDEO INPUT CARD (OPTIONAL: BT-YA701P) VIDEO 1 OUT IN AUDIO 2 AUDIO 1 OUT IN VIDEO 2 OUT Y/C IN IN OUT IN EXT.SYNC 1 2 3 4 5 Compatible signal formats: 480/60i, 576/50i, 576/50p, 480/60p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/24psF Video input/output terminals Input (IN) and output (OUT) terminals for video signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) Select VIDEO 1 : press INPUT SELECT A/C/E button Select VIDEO 2 : press INPUT SELECT B/D/F button S-video input terminal Input terminal for the S-video signal. When an S-video signal is input to this terminal and a video signal is input to VIDEO 2, the S-video signal has priority over the video signal. When choosing the S-video input, press INPUT SELECT B/D/F button. Synchronised signal input/output terminals Input (IN) and output (OUT) terminals for the complex synchronised signals. Function differs depends on the SYNC SELECT setting in the FUNCTION SETTING setup menu. For details, refer to Page 15. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) Audio input/output terminals Input (IN) and output (OUT) terminals for audio signals corresponding to VIDEO 1 and VIDEO 2. The IN and OUT terminals are bridge-connected. Connection terminal (to a Multi-Format Monitor) Attach to the connection terminal of your Multi-Format Monitor. 1 2 3 4 2 3 4 5 6 LCT1261-001A (EN)02.6.25, 12:25 PM 8
ENGLISH SDI INPUT CARD (OPTIONAL: BT-YA703P) AUDIO 2 AUDIO 1 OUT IN SWITCHED OUT SDI 1 SDI 2 IN IN 1 2 3 4 Output terminal for a selected component serial digital signal Output terminal for a selected digital signal (the input displayed on the screen). The output signal is cable- compensated. NOTE:When the monitor’s power is OFF, no digital signal is output. Input terminals for component serial digital signals Input terminals for the digital signal. Select SDI 1 : press INPUT SELECT A/C/E button Select SDI 2 : press INPUT SELECT B/D/F button Audio input/output terminals Input (IN) and output (OUT) terminals for the analogue signals corresponding to SDI 1 and SDI 2. NOTE:This input card cannot decode audio data even if contained in the input digital signal. Connection terminal (to a Multi-Format Monitor) Attach to the connection terminal of your Multi-Format Monitor. 1 Compatible signal formats: 480/60i, 576/50i 2 3 4 HD SDI INPUT CARD (OPTIONAL: BT-YA705G) Compatible signal formats: 720/60p, 1080/50i, 1080/60i, 1035/60i, 1080/24psF, EMBEDDED AUDIO Input and output terminals for HD SDI 1 component serial digital signals Input (IN) and output (OUT) terminals for HD serial digital signals. Select HD SDI 1: press INPUT SELECT A/C/E button Input and output terminals for HD SDI 2 component serial digital signals Input (IN) and output (OUT) terminals for HD serial digital signals. Select HD SDI 2: press INPUT SELECT B/D/F button Connection terminal (to a Multi-Format Monitor) Attach to the connection terminal of your Multi-Format Monitor. 1 2 3 HD SDI 1 IN OUT 2 1 HD SDI 2 IN OUT3 7 LCT1261-001A (EN)02.6.25, 12:25 PM 9
PREPARATION 1. Turn off the Multi-Format Monitor’s main power and unplug the power cable from the AC outlet. 2. Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which you are going to install the card. 3. Insert the Input Card’s board (green- coloured) into the slot, fitting the board into the guide rails on the top and bottom of the slot. 4. Push the Input Card in so that its front panel touches the monitor’s rear panel. 5. Secure the Input Card by replacing the screws removed in Procedure 2. INSTALLING THE INPUT CARD Optional input cards are necessary to use the functions of this monitor. Before mounting the monitor or connecting other equipment to the monitor, be sure to install the input cards. ATTACHING THE WIDE MASK A wide mask is provided with the monitor. This changes the viewable screen area to the 16:9 aspect ratio. The wide mask cannot be attached to the monitor after the monitor is mounted in a rack. Mount the wide mask before installing the monitor in a rack. 1. Prepare the provided wide mask and 4 screws (for attaching). 2. Attach the wide mask to the monitor. 3. Secure the wide mask with the screws (fix 2 screws each to both right and left side). ● When detaching the wide mask, follow this procedure in reverse. Slot cover Fit the board to the guide rails.Rear side of the BT-H1700AE multi-format monitor Knob Input card (the illustration shown is of the BT-YA701P)Guide rails Knob NOTE :Do not touch the terminal connected to the monitor or board pattern. Do not remove slot covers from the monitor’s slots if they are not in use. 8 LCT1261-001A (EN)02.6.25, 12:25 PM 10