Panasonic Multi Format Monitor Bt H1700ae Operating Instructions

ENGLISH
1. Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws
(provided).
2 Attach the Power Cord Holder cover to the AC power cord.
3. Connect the AC power cord to the AC inlet, and join the Power Cord Holder cover with the
case.
ATTACHING THE POWER CORD HOLDER
The provided Power Cord Holder prevents accidental disconnection of the AC power cord from the AC inlet.
The Power Cord Holder consists of two parts; a case and cover.
Press the cover until it clicks.
Hold...

BASIC MENU OPERATIONS
(MAIN MENU, SETUP MENU)
ABOUT MENU SCREENS
This monitor features a MAIN MENU (main menu screen) and
a SETUP MENU (setup menu screen).
The MAIN MENU contains the functions normally used, and
the SETUP MENU contains the settings required for initial
setup.
    
FUNCTION SETTING
PICTURE SUB ADJ.
COLOR TEMP/BAL. 
SIZE/POSI.ADJ.
DISTORTION ADJ.
STATUS DISPLAY
CONTROL LOCK      :ON
 all reset
EXIT: 
MENU ENTER:+ SELECT:
     
APERTURE CONTROL
SLOT CONDITION
sub menu POSITION :LOWER
AREA...

ENGLISH
11
HOW TO USE “MAIN MENU”
“MAIN MENU” ITEMS
The following items appear in MAIN MENU.
ItemsFunctionsDisplays
1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal.*1
2 SLOT CONDITION Displays the status of the input cards installed in each of the input card slots.
3 sub menu POSITION Selects the display position of the sub menu superimposed on the screen.
4 AREA MARKER Selects the size marker for the other screen ratio used when the screen
ratio is 16:9.*2
5 AREA...

12
1. APERTURE CONTROL
Compensates the frequency
characteristics of the input
video signal. Press the 
button to display the setting
menu illustrated on the right.
NOTE :APERTURE
CONTROL is not
displayed when the
RGB signal is input.
●INPUT A/B corresponds to SLOT 1, INPUT C/D to SLOT 2,
and INPUT E/F to SLOT 3.
●VIDEO-1 or VIDEO-2 shows the video input card is installed.
COMPO. or RGB shows the component/RGB input card.
SDI 1 or SDI 2 shows the SDI input card is installed.
Item : LEVEL
Adjustment
 range...

ENGLISH
13
Input Signal Format Standard Manual
setting setting
(MANUAL)
NTSC, PAL, 480/60i,
ITU601
480/60p, 576/50i, 575/50p
ITU709
720/60p, 1080/50i, 1080/60i,
ITU709
1035/60i, 1080/24psF
    
SELECT    :MANUAL
R-Y PHASE :  90
R/B GAIN  :0.86
G-Y PHASE : 244
G/B GAIN  :0.36
 sub menu
 reset
EXIT: 
MENU ADJUST:- + SELECT:
5. AREA MARKER-R
Items : Selects the size marker for the other screen ratio
(aspect) used when the screen ratio is 16:9. (for
external control)
Settings : OFF/16:9/4:3/13:9/14:9/MODE...

HOW TO USE “SETUP MENU”
“SETUP MENU” ITEMS
Items Functions
1 FUNCTION SETTING Displays the monitor’s power-up time or the total usage time.
2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel.
3 COLOR TEMP./BAL. Sets or adjusts the colour temperature or white balance.
4 SIZE/POSI. ADJ. Adjusts the size or position of the picture.
5 DISTORTION ADJ. Compensates the picture distortion.
6 STATUS DISPLAY Makes the status of the input signal appear or disappear on...

ENGLISH
15
    
COLOR SYSTEM       :AUTO
SYNC SELECT        :INT.
RUSH DELAY TIME    :STD.
TALLY SELECT       :GREEN
REMOTE SYSTEM      :MAKE
EMBEDDED           :1G
HOUR METER X100h   :000 
EXIT: 
MENU ADJUST:- + SELECT:
ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS
1. FUNCTION SETTING
Selects the colour system and
displays the monitor’s power-
up time or the total usage time.
Press the 
 button to display
the setting menu illustrated on
the right.
Item : COLOR SYSTEM
Settings : AUTO/NTSC/PAL
Function :...

Item : CONTRAST
Adjustment
 range : –20 ~ 00 ~ +20
Function : For approximate adjustment of the picture
contrast. Before adjustment, turn the CON-
TRAST knob on the front panel to the middle.
Item : BRIGHT
Adjustment
 range : –20 ~ 00 ~ +20
Function : For approximate adjustment of the picture
brightness. Before adjustment, turn the BRIGHT
knob on the front panel to the middle.
Item : CHROMA
Adjustment
 range : –20 ~ 00 ~ +20
Function : For approximate adjustment of the colour
density. Before adjustment,...

ENGLISH
17
    
PINCUSHION       : 00
PIN.BALANCE      : 00
PARALLELOGRAM    : 00 
TRAPEZOID        : 00
ROTATION         : 00
 sub menu
 reset
EXIT: 
MENU ADJUST:- + SELECT:
31sDISTORTIONsADJ1
Compensates the picture
distortion. Press the 
 button
to display the setting menu
illustrated on the right.
Item : PINCUSHION
Adjustment
 range : –20 ~ 00 ~ +20
Function : Compensates pincushion picture distortion.
– : Expands both left and right sides of the
picture.
+ : Squeezes both left and right sides of...

    
STATUS DISPLAY   :ON
1080/1035        :1080
 
EXIT: 
MENU ADJUST:- + SELECT:
Item : STATUS DISPLAY
Settings : ON/OFF
Function : Makes the format name appear or disappear
when signals are input and the signal status
appear or disappear when the input signal is
changed.
ON : The information is displayed.
OFF : The information is not displayed.
Item : 1080/1035
Settings : 1080/1035
Function : Makes the number of effective scanning lines
appear or disappear when the HDTV signal is
input.
1080 : Sets the...