Panasonic Multi Format Live Switcher Av Hs450n Operating Instructions

151
5. System settings
5-8.  Status displays
5-8-1.   Alarm status displays
The alert status (alarms) for this unit’s power supply and cooling fan are displayed on the LCD.
Press the [SYSTEM] button to light it, and display the SYSTEM menu.
 Refer to “2-1-5. LCD menu area”.
 Turn [F1] to display the Alarm sub menu.
 
SYS    5 |
Power   |
Fan     |
        |
       
Alarm   |NoAlarm|NoAlarm|       |       
  Alarm  Alarm
The alert status of the power supplies (mainframe and control panel) is...

152
5. System settings
5-8-3.  Displaying the version information and option information
Information on the unit’s software and hardware versions 
and the statuses of the options are displayed. 
SYS   12
|
Select  |
Version |
        |
SysVer
MainVer | MFSoft|   1.00|       |1.00.00
PnlSoft
PnlFPGA
CntFPGA
In1FPGA
In2FPGA
M/EFPGA
OutFPGA Press the [SYSTEM] button to light its indicator 
and display the SYSTEM menu.
 Refer to “2-1-5. LCD menu area”.
 Turn [F1] to display the MainVer sub menu.
 Turn...

153
5. System settings
5-9.  Initialization
5-9-1.   Initializing Setting Data
Initialization returns the set data to the factory shipment status.
(The network settings and the date and time settings are not initialized.)
Press the [SYSTEM] button to light its indicator and display the SYSTEM menu.
 Refer to “2-1-5. LCD menu area”.
 Turn [F1] to display the Initial sub menu.
 
SYS    6 |
Init↓   |
F Init↓ |
        |
       
Initial |       |       |       |       
 Press [F2] to initialize the...

154
6.  External interfaces
6-1.   Connecting the control panel and mainframe
Connect the MAIN FRAME connector on the control panel and PANEL connector on the mainframe using the 
CAT5E cable supplied.
CAT5E, straight cable, STP (shielded twisted pair), 10 m
Provide the cable below if the control panel and mainframe are installed in a location where the CAT5E cable 
provided is not long enough to connect them (where the distance between the control panel and mainframe is 
more than 10 meters).
CAT5E,...

155
6. External interfaces
6-2-2.  EDITOR
The unit can be controlled by an external device by connecting the device to the EDITOR connector.
Use it with the settings below.
Baud rate: 38400 bps
Parity: ODD
Stop bit: 1 bit
1 2 3 4 5 
9 8 7 6 
RS-422, D-sub 9-pin, female, inch screw Pin No. Signal name Description of signal 1 FRAME GROUND Frame ground
2 TXD – Send data (–)
3 RXD + Receive data (+)
4 GROUND Ground
5 NC Not used
6 GROUND Ground
7 TXD + Send data (+)
8 RXD – Receive data (–)
9 FRAME GROUND...

156
6. External interfaces
6-2-4.  TALLY/GPI
This connector is provided with eight contact input ports (GPI In) for controlling the unit from an external device, 
31 ports (GPI Out) for outputting the tally and status information from the unit to the external device, and one port 
(ALARM Out) that is used exclusively as the alarm output.
For details of the settings, refer to “5-7-3. Setting the GPI”.
17 1
50 3418
33
Com GPI Out
ALARM Out
Example of GPI Out and ALARM connections
Ensure that the conditions...

157
6. External interfaces
6-3.  Control panel
6-3-1.   TALLY/GPI
This connector is provided with eight contact input ports (GPI In) for controlling the unit from an external device, 
8 ports (GPI Out) for outputting the tally and status information from the unit to the external device, and one port 
(ALARM Out) that is used exclusively as the alarm output.
For details of the settings, refer to “5-7-3. Setting the GPI”.
13 1
25 14
Com GPI Out
ALARM Out
Example of GPI Out and ALARM connections
Ensure that...

158
7.  Image transmission functions
This unit comes with a function for transmitting still images from the host computer to the unit via LAN and a\
 
function for importing still images from the unit into the host computer. The image transmission software must be 
installed in the host computer from the CD-ROM supplied in order to use these functions. 
For details on installation, refer to “How to install the software”.
Specifications
Run the image transmission software (HS450 Tool) in a host computer...

159
7. Image transmission functions
 How to install the software
This section describes how to install the image transmission software (HS450 Tool).
Windows XP is used as the host computer’s operating system in the example given here.1.  Insert the CD-ROM supplied with the unit into the CD-ROM drive of the host computer in which the program will be installed. (Here, E: will serve as the name of this drive for example.)
2.  Execute the setup program (E:\HS450TOOL\ENG\SETUP.EXE).
3.  The installer now...

160
7. Image transmission functions
Operation
This section describes how to operate the image transmission software (HS450 Tool).

On the Start menu of Windows, select [Programs]  [Panasonic]  [AV-HS450Tool]  [HS450Tool].
The main screen now appears.

Click the [CLOSE] button.

Set the unit’s IP address in the IP Address setting box.