Panasonic Multi Format Live Switcher Av Hs450n Operating Instructions

111
4. Input/output signal settings
4-2-2.  Adjusting the DVI input signals
Adjust the clock/phase and position of the DVI-I input signals.
Press the [INPUT] button to light its indicator and display the INPUT menu.
 Refer to “2-1-5. LCD menu area”.
 Turn [F1] to display the INPUT XX sub menu.
(X: A1, A2, B1 or B2)
The input used to set the clock phase and position is selected for X.
 Turn [F2] to display the third menu of DVIPhs.
 
INPUT XX |
DVIPhs  |
ClkPhs  |
H-Pos   |
V-Pos  
        |  4/4...

112
4. Input/output signal settings
4-3.  Setting the output signals
OUT1 to OUT4 are SDI signal outputs.
OUT5 and OUT6 are DVI-D signal outputs.
OUT A1, OUT A2, OUT B1 and OUT B2 can be set only when one of the following option boards has been 
connected.
 
 AV-HS04M4 (Analog Output Board)
 
 AV-HS04M5 (DVI/Analog Output Board)
 
 AV-HS04M7 (SDI Output Board)

Output connector Setting menu and numbers of sections in this 
manual
Asign DVIOut 
(Dig) DVIOut 
(Ana) DownCnv
4-3-1 4-4 4-4 4-5
OUT1 to OUT4...

113
4. Input/output signal settings
4-3-1.  Assigning the output signals
Assign the output signals to OUTPUT1 to OUTPUT10.
Press the [OUTPUT] button to light its indicator and display the OUTPUT menu.
 Refer to “2-1-5. LCD menu area”.
 Turn [F1] to display the OUTPUTYY sub menu.
(Y: OUT1 to OUT6, A1, A2, B1 or B2)
The output used to assign the output signal is selected for Y.
 Turn [F2] to display the Asign sub menu.
 
OUTPUTYY |
Asign   |
Souce   |
Mode↓   |
       
        |  1/2  |    PGM|...

114
4. Input/output signal settings
When the SDI output board (option) has been connected, turn [F4] to set the output mode using the Mode 
item, and press the [F4] switch to enter the setting.
An asterisk () appears on the left of the currently selected output mode.
Normal:  The same signals as the system format signals are output.
DC (down-converter):
    When the system format is 1080/59.94i or 720/59.94p, the signals are output in the 480/59.94i 
format.
When the system format is 1080/50i or...

115
4. Input/output signal settings
4-4.  Setting the DVI output signals 
(OUT5 and OUT6 standard outputs and options)
Set the DVI output signals of the OUT5 and OUT6 standard outputs and the DVI output signals if the DVI/analog 
output board (option) has been connected.

OUTPUTYY|
DVIOut  |
Mode    |
Size↓   |
Scale↓ 
        |  2/2  |   
Dig|  Auto| Fit-V
    Ana    XGA
   WXGA
   SXGA
 WSXGA+
   UXGA
  WUXGA  Fit-H
   Full
 Press the [OUTPUT] button to light its indicator 
and display the OUTPUT...

116
4. Input/output signal settings
Turn [F5] to select the scaling method, and press the [F5] switch to enter the selection.
Fit-V:   The aspect ratio of the output images is maintained, and the size of the images is increased or 
reduced in accordance with the vertical resolution.
(Black bands are inserted into the areas where there are no images. The protruding parts of the 
images are cropped.)
Fit-H:   The aspect ratio of the output images is maintained, and the size of the images is increased or...

117
4. Input/output signal settings
4-5.  Setting the down-converter (option)
Select the settings for the down-converter that is built into the SDI output board (option).

OUTPUTYY|
DownCnv |
Scale↓  |
Delay↓  |
Sharp↓ 
        |  2/2  |    
SQ|   90H|     3
     EC
     LB     1F    1~5
 Press the [OUTPUT] button to light its indicator 
and display the OUTPUT menu.
 Refer to “2-1-5. LCD menu area”.
 Turn [F1] to display the OUTPUTYY sub menu.
(Y: Out1 to Out4, A1, A2, B1 or B2)
The output signal...

118
4. Input/output signal settings
4-6.  Setting the sync signals
The sync signals to be used by the system can be selected.
External sync:   For synchronization with an external sync signal (gen-lock). 
The reference input signal is looped through and output.
BBST:  Black burst signal (vertical phase of 0H)
BBAD:  Black burst signal
Vertical phase of 90H when the 59.94i or 59.94p format is selected; 
vertical phase of 75H when the 50i or 50p format is selected
TRI:  Tri-level sync signal (vertical...

119
4. Input/output signal settings
4-7.  Adjusting the output signal phase
The phase of the output video signals can be adjusted.
Press the [SYSTEM] button to light its indicator and display the SYSTEM menu.
 Refer to “2-1-5. LCD menu area”.
 Turn [F1] to display the OutPhs sub menu.
 
SYS    2 |
System  |
H-Phase |
V-Phase |
       
OutPhs  |     1H|      0|      0|       
     0H  −1320
     |
  +1319   −100
     |
   +100
 Turn [F2], and select 0H or 1H using the System item.
0H:   The output...

120
4. Input/output signal settings

REF Phase Reference
H Phase (–0.5H to +0.5H) + V Phase (±100 lines)
Internal
Fixed DL
Approx.  0.2H

(1F delay for REF and in-phase output)
FS Range
MAX less than approximately 1 frame Longest Output
(+1.5H)
Approx. 0.3H +0.5H
Output Phase Variable Range Output Phase Variable Range
H Phase (–0.5H to +0.5H) +  V Phase (±100 lines)
Approx. +0.3H to +1.3H
Internal
Fixed DL
AVDL Range
REF
(System standard)

(+1H)
Shortest
Output (+0.5H) Output Phase Variable RangeH Phase...