Panasonic Multi Format Live Switcher Av Hs400n Operating Instructions

81
5. System settings
5-8. Initialization
Initialization returns the set data to the factory shipment status. 
(The date and time data is not initialized.)1  Press the [FUNC] b utton to light its indicator
 , and then press the [SYSTEM] button to display the SYSTEM 
menu.
2  Turn [F1] to display the Initial sub menu.

Initial Init↓
  5/14
3 Press [F] to initialize the settings. The “Init?” message appears.
4   To initialize the settings, turn [F] to select YES, and then press the [F]...

8
6. External interfaces
This unit comes with RS-4, GPI and tally connectors to serve as external interfaces.
6-1. RS-422 connector
This enables the unit to be controlled by an external device.
Use it with the settings below. (D-sub 9-pin, female)Baud rate:  38400 bps
Parity:  ODD
Stop bit:  1 bit
 
12345
9 8 7 6
Pin assignment
Pin No. Signal name Description of signal 1 FRAME GROUND Frame ground
 TXD – Send data (–)
3 RXD + Receive data (+)
4 GROUND Ground
5 NC Not used
6 GROUND...

83
6. External interfaces
6-2. GPI connector
These connectors enable the unit to be controlled from an external source.
Signals are input using contacts. The following types of control are exercised 
using the contacts as triggers. Use stereo mini plugs with a 3.5 mm diameter 
for connection to the unit.
GPI2 COMMON
GPI1

Function assignedDescription of control Remarks
AUTO Control exercised using AUTO button on unit’s panel
CUT Control exercised using CUT button on unit’s panel
DSK Control exercised...

84
6. External interfaces
6-3. Tally connector
The tally connector comes with tally output, output enable, power supply or fan alarm output pins. 
The output signals from the tally output pins are for lighting the tally lamps, and these outputs are open collector 
outputs.
(D-sub 15-pin male)
54321
9 10 11 126
137
148
15
Pin assignment
Pin No. Signal name Input/output Description of signal
1 IN1Open collector output Tally output of input video 1
 IN
Open collector output Tally output of input...

85
7. Setting menu table
A setting is entered when an item displayed (↓) is selected and then the [F1], [F], [F3], [F4] or [F5] switch is 
pressed.
(It will not be entered unless the switch is pressed.)
Menu Sub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
TIME BKGD ParameterTransTime Unit —
1/5 Setting range 0 to 13s 0 to 999f Frame, Sec  —
Default value 1s 0fSec —
KEY ParameterTransTime Unit —...

86
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
KEY KEY ParameterType LumKey Fill PVW
1/8 Setting range Lum, Linear, 
Chroma ChrmOn, ChrmOff Bus, Matte Auto, On, Off
Default value Linear ChrmOff Bus Auto
Adjust ParameterClip GainDensityInvert
 /8
Setting range

0.0 to 108.0 0.0 to  
00.0
 0.0 to 100.0 On, Off
Default value 0.0 100.0100.0Off
FillMatt ParameterHue SatLumLoad ↓
3/8...

87
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
DSK DSK ParameterType FillPVW
1/5 Setting range Lum, Linear Bus, Matte On, Off
Default value Linear BusOff
Adjust ParameterClip GainDensityInvert
/5 Setting range

0.0 to 108.0 0.0 to  
00.0
 0.0 to 100.0 On, Off
Default value 0.0 100.0100.0Off
FillMatt ParameterHue SatLumLoad ↓
3/5 Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0...

88
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
IN/OUT Input ParameterSignal FSMode ↓
AnaGain
1/11 Setting range IN1 to 8 On, Off
Normal, UC, 
AUTO, D by D −30 to +30
Default value  — OnNormal0
Output ParameterSignal Assign
 /11
Setting range

OUT1 to 6 PGM, PVW, AUX,  Multi, KEYOut
Default value  —
Ref ParameterSync ↓
BBSetup GenLock
3/11 Setting range
BBST, BBAD, 
TRI, INT 0IRE,...

89
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
MEMORY PSMEM ParameterMode NO.SelXPTExec ↓
1/3 Setting range Store, Recall, 
Clear 
1 to 10 Disable, Enable
Default value  —  — — —
FMEM ParameterSignal Store Exec ↓
 /3
Setting range

AUX FMEM1, FMEM
Def ault v

alue  —  —  —
SDCard ParameterMode ↓
Select SaveFile Ex
 ec ↓
3/3 Setting range
Load, Save, Init, 
No Card FMEM1,...

90
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
SYSTEM GPI ParameterGPI1 GPI2GPIEN
4/14 Setting range AUTO, CUT, 
DSK, PinP, FTB, 
BGDAUTO, 
BGDCUT, 
KEYAUTO, 
KEYCUT AUTO, CUT, 
DSK, PinP, FTB, 
BGDAUTO, 
BGDCUT, 
KEYAUTO, 
KEYCUTON, OFF
Default value AUTO DSKON
Initial ParameterInit ↓
5/14 Setting range
Alarm ParameterPower Fan
6/14 Setting range Alarm, NoAlarm Alarm, NoAlarm
Default value...