Panasonic Monitor Cf Vdl02bm Owners Manual

E
11 Advanced
Set the advanced settings.
When needed, the touchscreen can be configured using the following steps.
1Windows XP
Select 
 from the taskbar and select [Adjust settings], or select
[Settings] from [start] - [All Programs] - [UPDD]
Windows 2000
Select 
 from the taskbar and select [Adjust settings], or select
[Settings] from [Start] - [Programs] - [UPDD]
The following screen will be displayed.
Configuring the Touchscreen
For more information, refer to [Help]. Hardware
Set the hardware...

E
12
2Make necessary changes
3Select [OK]
Adjustments can be made when double-click operations are assumed by the com-
puter although single-click operations are intended, by clicking [Windows] from the
display shown in the previous page and decreasing the value for [Time] in [Double
Click Settings].
Immediately run [Calibrate] when the number of Calibration Points is changed.
It is also possible to change the double click speed for [Tap and Buttons]*1.
It is important to note that when the double click...

E
13
Adjusting the LCD Monitor
1Press 
The OSD main menu is displayed.
Brightness
1:Exit 2:Select
Fine adjustment on the display size, position, and so on, may be necessary since the signal
timing differs depending on the computer.

NOTE
ICON
DESCRIPTION
Adjust brightness
Adjust contrast
Set RGB color
Move input image capture
window
Adjust clock and phase
Automatically optimize
the image quality
Miscellaneous settings
Display RGB input signal
information
FUNCTION
Brightness
Contrast
Color
Position
Image...

E
14The Brightness menu item is used to adjust the bright-
ness.  A slider indicating the current brightness value is
displayed.  The adjustment range is 0 to 63.
Adjust by pressing 
 or  , then press . (To cancel,
press 
  and then turn off the power to the LCD Moni-
tor. When the power is turned on again, the operation
will be canceled.)
 (Brightness)
The Contrast menu item is used to adjust the contrast.  A
slider indicates the current contrast value.  The range of
adjustment is 0 to 255.
Adjust by...

E
15
The Position menu allows the adjustment of image po-
sition in Analog input mode.
Select the item by pressing 
 or  , then press .
H-Position
H-position is used to adjust the horizontal image posi-
tion manually.  A slider and the current value are dis-
played.  The adjustment range is 0 to 127.
Adjust by pressing  or  , then press . (To cancel, press
  and then turn off the power to the LCD Monitor. When
the power is turned on again, the operation will be canceled.)
V-Position
V-position is used to...

E
16
Auto ConfigAuto Configuration automatically adjusts image posi-
tion, clock, and phase.
A confirmation box is displayed. The default selection
is [Yes]. Press 
 to execute the menu. If you want to
cancel, select [No] and press 
.
To save the adjusted value, select [Brightness], then press 
.
 (Auto Configuration)
YesNo
MiscellaneousInit NVRam
OSD Timeout
OSD Position
Select the item by pressing  or  , then press .
Init NVRam
All values of the OSD menu are set to default.
A confirmation box is...

E
17
No display after power-
ing on
or
“Cable not connected” is
displayed
An afterimage appears
(i.e., green, red, and blue
dots remain on the dis-
play) or there are dots
not displaying the cor-
rect colors
The sound is not heard
“Input Not Supported”
is displayed
Troubleshooting
When a problem occurs, refer to this page.  If a problem appears to be related to a software
application, read the software related manual.  If you still cannot troubleshoot the problem,
contact Panasonic Technical Support....

E
18
Check the cable connection to the LCD Monitor.
Confirm that the [Serial Port] has not been set to [Dis-
able] in the Setup Utility.
Confirm that the setting for resource in [UPDD]*1 - [Set-
tings] - [Hardware] and the setting of the Serial Port in the
Setup Utility are the same.
*
1Windows XP: [start] - [All Programs] - [UPDD]
Windows 2000: [Start] - [Programs] - [UPDD]
The mode not supported has been selected.
Set the display mode to 640 × 480  60 Hz, 800 × 600  60
Hz or 1024 × 768 60 Hz.
Check the...

E
19
Model No.
Input Interface
LCD Type
Display Area
Resolution
Color
Pixel Pitch
Brightness
Display Modes VGA
SVGA
XGA
Touchscreen
Interface Display Port
Serial Port
Line IN
Function Key
Speaker
DC-IN Input
Power Consumption
Physical Dimensions (W X H X D)
Weight
Environment Temperature
Humidity
Guaranteed Computer *2
Specifications
CF-VDL02BM
Analog RGB Signal
12.1 type TFT Color Active Matrix LCD
247.2 mm × 185.7 mm
1024 × 768 dots
262,144 (simulated 16,777,216) Colors
0.24 mm × 0.24 mm
1200 cd/m2
640...

F
20
FRANÇAIS
Pour éviter de se blesser gravement ou d’enfreindre la loi, veiller à placer le moniteur à
une position visible du conducteur uniquement pour la navigation ou avec l’utilisation
de la caméra à vision arrière uniquement.
Lors de la conduite
Le conducteur ne doit pas actionner le Moniteur LCD.
(Actionner le Moniteur LCD lorsque l’on conduit est une distraction et peut entraîner
un accident).
En guise de sécurité, il est interdit de conduire avec la télévision, le lecteur vidéo ou
DVD en...