Panasonic Monitor Cf Vdl02bm Owners Manual

LCD Monitor
CF-VDL02BM
ENGLISHOPERATING INSTRUCTIONS
Introduction...................................... 4
Names and Functions of Parts ....... 5
Mounting the LCD Monitor .............. 6
Starting Up/Shutting Down ............. 8
Touchscreen.................................... 9
Adjusting the LCD Monitor ........... 13
Troubleshooting............................ 17
Specifications................................ 19
E
FRANÇAISINSTRUCTIONS D’UTILISATION
F
Introduction................................. 22
Noms...

E
2
ENGLISH
To avoid risk of serious injury or possible violation of laws, make sure that the monitor
is placed visible to the driver for no other purpose than navigational or with the use of
rear view camera only.
When Driving
The driver must not operate the LCD monitor.
(Operating the LCD monitor while driving is a distraction and may lead to an acci-
dent.)
As a safety factor, driving with the television, video or DVD player is prohibited.
Keep the unit at an appropriate sound level. Driving with the...

E
3 When Car Washing
Do not expose the LCD monitor to water or excessive moisture. This could cause electrical
shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce very high temperatures inside your car.  Let the
interior of the car cool down before switching the unit on.
Do not watch the LCD monitor with the engine off.  It will consume battery power and
may prevent the engine from starting.
Use Panasonic Technical Support
Do not attempt to disassemble or adjust this...

E
4
Thank you for purchasing the LCD Monitor for the Panasonic notebook computer series.
This LCD monitor features a touchscreen function, which makes computer operation pos-
sible by simply touching the surface of the LCD monitor and pressing buttons – even when
the computer is not being held.
Introduction
Operating Instructions............... 1
RGB/Serial/Sound Cable ............ 1 Sun Shade................................... 1
PS/2 Cable................ 1LCD Monitor................................ 1...

E
5
Names and Functions of Parts
Function Buttons
LCD 
Does the same operation as
through   F5    of the keyboard.
   F1
Speaker
The application software
allocated to   F11   is started up.
Emergency Button
Green : Normal
The brightness can be adjusted freely.
Orange : Drops the brightness automatically due to an
increase in the internal temperature.
Red : The backlight goes OFF automatically due to
an increase in the internal temperature.
Temperature LED Indicator
Power Switch
LED Indicator
Speaker...

E
6
1
Connect your computer to the port replicator
 (
 Operating Instructions of the port replicator)
2Remove the cover of the LCD Monitor
Remove the four screws, and remove the cover.
3Connect the LCD Monitor to your computer via the connection cables (in-
cluded)
Mounting the LCD Monitor
Function Key PortFn KEY
SERIAL I/FSound PortLINE IN
DC-IN Jack
Serial Port
1
2
3
Display PortRGB IN
DC-IN Jack
Keyboard
(commercially available product)
Car Adaptor
(commercially
available prod-
uct)
Car Adaptor
LCD...

E
7
When installing the LCD monitor, lo-
cate the monitor under the dashboard
as shown in the figure to prevent the
monitor  from interrupting the sight
of the driver and to prevent the moni-
tor from being hit by direct sunlight.
Do not expose the computer to direct
sunlight or excessive heat.
4Attach the cover of the LCD Monitor
Attach the four screws.
5Mount the Sun Shade
Attach the two screws (included).
6Mount the LCD Monitor
CAUTION
Use these M4 screw holes to mount the LCD Monitor. 

E
8
1Save important data and close each application
2Display the shut down screen
Windows XP
Select [start] - [Turn Off Computer].
Windows 2000
Select [Start] - [Shut Down].
3Confirm shut down
Windows XP
Select [Turn Off].
Windows 2000
Select [Shut Down], then select [OK].
The computer will power off automatically.
4Press the power switch of the LCD Monitor
The LCD Monitor will turn off after the computer is shut down completely.
Starting Up/Shutting Down
Starting Up
1Press the power switch of the LCD...

E
9
Touchscreen
The LCD Monitor is equipped with a touchscreen function allowing you to perform the
same operations as the touch pad or mouse by touching the surface of the display with the
finger or stylus.
The operation settings can be changed in the following menu.
Windows XP: [start] - [All Programs] - [UPDD] - [Settings].
Windows 2000: [Start] - [Programs] - [UPDD] - [Settings].
NOTE
 Moving the cursor Clicking
 Double-clicking Dragging Cursor
Touch and hold the object (i. e.
file or icon), move the...

E
10
CAUTION
Handling the Touchscreen
Do not place any object on the surface or press down forcefully with sharp-pointed ob-
jects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pens).
Do not apply pressure within 5 mm of the perimeter of the display panel.  The cursor may
move to the edge of the display.
Do not operate the computer when such things as dust are on the screen, or allow contact
with substances that could dirty the touchscreen, such as oil.  The cursor may...