Panasonic Monitor Bt Lh2600w Owners Manual

31
REMOTE Specifications (continued)
gAssignment of item priority levels
• When both “MARKER1” and “MARKER2” are ON at the same time, “MARKER1” has priority. However, when the  display aspect is 4:3, the “MARKER1” aspect is 16:9 , and the “MARKER2” aspect is 4:3, “MARKER2” is 
displayed. In this case, the “MARKER2” background is controlled.
• When “MARKER BACK HALF” and “MARKER BACK BLACK” are simultaneously activated, priority goes to  “MARKER BACK BLACK”. 
• When two or more of the following items -...

32
REMOTE Specifications (continued)
gSetting command
No Command Explanation Data Response
1 IIS Input switch 0: SDI1  1: SDI2  2: VIDEO
3: YP
BPR/RGB 4: Y/C IIS
2 VPC Image quality 
adjustment  CON00-60 : Contrast settings
BRI00-60 : Brightness settings
CRO00-60 : Chroma settings
PHA00-60 : Phase settings VPC
3 OBO Blue only 0: OFF  1: ON OBO
4 OHV HV Delay 0: OFF  1: H DELAY  2: V DELAY 
 
3: HV DELAY OHV
5 DSD Status display 0: CONTINUE   1: 3SEC OFF  2: OFF DSD
6 ISM Analog mode ANA0: YP
BPR ANA1:...

33
REMOTE Specifications (continued)
gQuery command
*1 When the aspect ratio is 16:9, the state of 16:9 markers is returned, and when 4:3, the state of 4:3 markers is  
 returned. 
No Command Explanation Data Response
1 QIS Input selection 0: SDI1 1: SDI2 2: YP
BPR
 
3: RGB-VIDEO 4: VIDEO 5: Y/C  
6: RGB-COMP.
2 QPC Image quality 
adjustment 
CON : Contrast setting value00-60
BRI : Brightness setting value00-60
CRO : Chroma setting value 00-60
PHA : Phase setting value 00-60
3 QBO
Blue only0: OFF  1: ON...

34
Error/Warning Displays
If for any reason an error occurs in this monitor, the LEDs above the picture adjusting knob flash at 1-second 
intervals  (informing you of the error/warning display). 
Maintenance
• To clean the cabinet or surface of the liquid crystal  protection panel, gently wipe with a soft, dry cloth.  
If the surfaces are extremely dirty, use a soft cloth dipped  in a weak detergent solution and then wrung-out to clean the 
surfaces, then use a dry cloth to finish. Water or similar su...

35
Specifications
gGeneral
Input power
is the safety infomation.
Dimensions: • Including stand
663 (W) mm x 456.1 (H) mm x 270 (D) mm 
[26-3/32 (W) inches x 17-31/32 (H) inches x  
10-5/8 (D) inches]
• Main body only, not including stand
663 (W) mm x 441.5 (H) mm x 114 (D) mm 
[26-3/32 (W) inches x 17-3/8 (H) inches x  
4-1/2 (D) inches]
Weight:• Including stand17.5 kg (38.58 lb)  
• Main body only, not including stand 15.0 kg (33.07 lb) 
Operating temperature: +5 °C to +35 °C (+41 °F to +95 °F)...

36
gList of compatible signal formats ( :  Compatible,  : Limited compatibility)
*1 When 1035/59.94I sign al is input, displayed as 1080/59.94I. Ot her various marker displays will use the 1080/
59.94I marker. 
*2 When 1035/60I signal is i nput, displayed as 1080/60I. Other vari ous marker displays will use the 1080/60I 
marker. 
Weight and dimensions when shown are approximately.
Specifications are subjec t to change without notice.
Input signal 
formats VIDEO Y/C SDI1 SDI2 YPBPRRGB-VIDEO RGB-COMP....

37
MEMO 

P
Matsushita Electric Industrial Co., Ltd.
Web Site: http://panasonic.net
© 2006 Matsushita Electric Industria l Co., Ltd. All Rights Reserved.
E
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA
Executive Office: 
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000
EASTERN ZONE:  
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7196  
Southeast Region:  (201) 348-7162
WESTERN ZONE:  
3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323)...