Panasonic Monitor Bt Lh2600w Owners Manual

11
1. Attach the power cord to the monitor unit.  2. Connect the power cord to the power outlet. 
1. Attach the mains lead to the monitor unit.  2. Connect the AC mains lead to the power outlet. 
Connecting and fixing the power cord (for the U.S.A. and Canada)
Power cord hookUsing the power cord 
hook and the screw, 
attach the power cord to 
the monitor unit. 
Power cord
Screw
Connecting and fixing the AC mains lead (for others)
AC mains lead hook Using the AC mains lead 
hook and the screw, 
attach the...

12
Six types of information are displayed on the screen. The input signal status, picture adjusting knob status, 
sharpness display, function display, audio level meter display and the menu display. 1. The selected input line (J page 9,  )
• VIDEO, Y/C, SDI1, SDI2,   
YP
BPR/RGB-VIDEO/RGB-COMP.
2. Various display (FILM mode) •Displayed when “FILM” is selected in “GAMMA 
SELECT”.
3. Signal format •The display status can be set in “STATUS 
DISPLAY” in the “ SYSTEM CONFIG” menu  
( J  page 21). 
• If...

13
•You can set FUNCTION display in the menu. 
• When “FUNCTION DISPLAY” ( J page 22) is “ON” 
and either [FUNCTION1]  or [FUNCTION5] is 
pressed, the unit displays the status of the 
FUNCTION item set.
• The display disappears if remains idle for 2 seconds. 
• The operational status is displayed in “XXXXX” ( J
page 23 “Operation items displayed when a 
FUNCTION button is used”).
• When the signal is SDI, the audio level is displayed 
on the white skeleton bar meter.
• You can switch the level display on...

14
1. Push [MENU] to display the MAIN menu. 
2. Push [ ,  ] to select the menu, then push [ENTER].  3. Push [ ,  ] to select the sub menu, then push 
[ENTER]. 
The setting values in the sub menu change to green. 
4. Push [ ,  ] to select the setting values, then  push [ENTER]. 
Push [MENU] to cancel. 
To return to the previous screen
Push [MENU].
Menu operations
MENU
FUNCTION
HOURMETER
[MAIN MENU]
MARKER
MARKER
    16:9
   4:3
   BACK
   CENTER
GPI PRESET1
GPI PRESET2 OFF
OFF
OFF
NORMAL
OFF
4:3
4:3
SET...

15
You can change the menu setting values and picture adjusting knob settings, then save and load up to 5 
combinations of screen adjustment values as user data. You can also return the setting values and adjustment 
values to the factory preset settings. 
The following settings are included in user data. 
• Menu settings except for “SETUP LOAD/SAVE” (including the button function settings on the front of the monitor)
• Screen adjustment values changed in picture adjusting knob
1. Push [MENU] to display...

16
Menu configuration
MAIN MENUVIDEO CONFIG
SYSTEM CONFIG
FUNCTION
INPUT SELECT GPI
MARKER GAMMA SELECT 
FILM GAMMA
COLOR TEMP.
SHARPNESS MODE
SHARPNESS H
SHARPNESS V
I-P MODE
MONO
ANAMO
SD ASPECT
SCAN
NOISE WIPE
CONT./BACK.
BACKLIGHT
SUB WINDOW
WFM POSITION
MENU POSITION
ROTARY POSITION
STATUS DISPLAY
SETUP LOAD
SETUP SAVE
FAN MOTOR
COLOR SPACE
GPI CONTROL
GPI1
GPI2
GPI3
GPI4
GPI5
GPI6
GPI7
GPI8
VIDEO/ Y/C
NTSC SETUP
YP
BPR/RGB
COMPONENT LEVEL
RGB SYNC
COMP.
AUTOSETUP
H POSITION
V POSITION
PHASE
CLOCK...

17
The underlined values are factory preset setting values. 
*1 The setting becomes “On” when the unit receives marker-related control during REMOTE operation. (Priority  goes to GPI when GPI settings exist.)
*2 When controlling the marker settings using the GPI function ( J page 30), these settings become disabled. 
These are not operated when the 2 screens are displayed. 
*3 These are only enabled when the HD signal and SD signal aspect ratio settings are 16:9. 
*4 These are only enabled when the SD...

18
g16:9 marker  
(Displayed when using HD, or when using SD 
with a 16:9 aspect ratio)
The marker is only displayed as a vertical bar. In 
addition, the   section becomes the “MARKER 
BACK” item. 
VISTA marker, CNSCO marker
A horizontal dotted line is displayed as the marker. 
When “UNDER” is set in “SCAN” in the “VIDEO 
CONFIG” menu, a vertical dotted line is also 
displayed as the marker. 
Area marker
A dotted line is displayed as the marker.  g4:3 marker 
(Displayed when using SD
 with a 4:3 aspect...

19
The underlined values are factory preset setting values. 
*1 During 2 screen display, the changes are not reflected in the still image of the main window. 
*2  When “RGB-COMP.” is selected in “YP
BPR/RGB” in the “INPUT SELECT” menu (J page 27), this does not operate.
*3 The following sharpness values can each be set,  1) VIDEO system input line (VIDEO,Y/C)(Factory settings  are SHARPNESS MODE : LOW, SHARPNESS H/V : 0)
2) any other input line’s HD (Factory settings are SHARPNESS MODE : HIGH, SHARPNESS...

20
3
gWB adjustment mode
You can adjust “WHITE BALANCE VAR1” – “WHITE BALAN CE VAR3” (WB) by selecting “VAR1” – “VAR3” in 
“COLOR TEMP.” in the “VIDEO CONFIG” menu.  The underlined values are factory preset setting values. 
*1 When “COLOR TEMP.” is selected and [ENTER] is pressed following item change, the display changes to the  confirmation screen. Selecting “YES” and pressing [ENTER] on this screen return GAIN and BIAS values to the 
selected color temperature values.
*2 When adjusting, the item...