Panasonic Monitor Bt Lh1760p Owners Manual

Operating Instructions
LCD Video Monitor
F0308T0 -P
Printed in Japan
VQT1R47ENGLISHD
Model No.    BT-LH1760P
Model No.    BT-LH1760E
Before operating this product, please read the instructions carefully and save this manual for future use. 

2
indicates safety information.
■THIS EQUIPMENT MUST BE GROUNDED
To ensure safe operation, the three-pin plug must be
inserted only into a standard three-pin power outlet
which is effectively grounded through normal
household wiring. Extension cords used with the
equipment must have three cores and be correctly
wired to provide connection to the ground. Wrongly
wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily
does not imply that the power outlet...

3
FCC NOTICE (USA)
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions. 
2) Keep these instructions. 
3) Heed all warnings. 
4) Follow all instructions. 
5) Do not use this apparatus near water. 
6) Clean only with dry cloth. 
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includ-
ing amplifiers) that produce heat. 
9) Do not defeat the safety...

4
Read this first ! (for BT-LH1760E)
indicates safety information.
■THIS EQUIPMENT MUST BE EARTHED
To ensure safe operation, the three-pin plug
must be inser ted only into a standard three-pin
power point which is effectively earthed through
normal house-hold wiring.
Extension cords used with the equipment must
have three cores and be correctly wired to
provide connection to the earth. Wrongly wired
extension cords are a major cause of fatalities.
The fact that the equipment operates
satisfactorily does...

5
Read this first ! (for BT-LH1760E) (continued)
indicates safety information.
Transportation precautions
Do not expose the LCD panel to strong pressure or pressure from pointed objects. Take care especially during
transportation. 
Exposing the LCD panel to strong pressure may result in blurring or other damage. Operating precaution
Operation near any appliance which generates strong magnetic fields may give rise to noise in the video and
audio signals. If this should be the case, deal with the situation...

6
The LCD screen is manufactured to precise specifications. Although over 99.99% of the pixels function normally,
0.01% of the pixels are either missing or constantly lit (red, blue or green). This is normal and not a cause for
concern.
The liquid crystal protection panel is a specially manufactured component. Wiping it with a hard cloth, or rubbing
it vigorously will scratch the surface.
If a still image is displayed for an extended period of time, it may generate a temporary afterimage (phosphor...

7
The BT-LH1760 LCD monitor was designed especially for broadcasting service and business use. It is equipped
with a high performance 17.0-inch wide LCD display panel.
■High performance LCD panel
This monitor achieves outstanding color reproduction, a wide viewing angle, and high-speed response.
The double-speed drive in the BT-LH1760 has substantially reduced image lag.
■Immediate image output of input signals
The time-lag caused by IP field unit conversion
*1 has been eliminated, and the delay from...

8
Video monitor unit
Front view
Rear view
Rear panel (Jpage 10) Power supply [you can switch between
AC and DC (Jpage 11)] Front panel (Jpage 9) Ta l l y  (Jpage 29, 36)
Controls and Their Functions 

9
POWER switch
Switches the power supply ON/OFF. When the power is ON, the LED (green) lights up.
INPUT SELECT buttons
Selects the signal input line. The green LED light above the button indicates the selected input signal.
VIDEO : Video input
SDI1 : Serial digital interface input (HD/SD compatible)
SDI2 : Serial digital interface input (HD/SD compatible)
YP
BPR/RGB : Analog component (YPBPR) or RGB input. Also compatible with PC input RGB.
* When using PC Input, select “RGB-COMP.” from “YP
BPR/RGB” in...

10
SDI (HD/SD) terminal (BNC)
IN1 : This is the SDI input terminal (compatible with HD/SD automatic switching).
IN2 : This is the SDI input terminal (compatible with HD/SD automatic switching).
SWITCHED OUT : This is the active through-out terminal for the SDI input signal being displayed on the screen.
* SDI active through-out is only output when [SDI1] or [SDI2] is selected using the [INPUT SELECT] buttons.
It is not output when anything other than SDI is selected. This terminal supports embedded...