Panasonic Memory Card Video Recorder AG-CPD15P Operating Instructions

							91
Administrator Operations on the 
Remote Control Panel (separately sold)
∗2  Don’t insert a P2 card in the slot2 
since the menu settings are not 
copied. 
∗3  The following lamp states indicate 
that an error has occurred. 
[BUSY] lamp fast blinking:
This indicates that an error occurred 
during configuration file
∗1 check or 
administrator authentication.
•  
If a configuration file∗1 check error 
occurred, the following are probable 
causes.
 
   - The configuration file is missing.
   -  
There are multiple configuration files.
   -  The configuration file is corrupted. 
•  If an administrator authentication 
error occurred, administrator setup 
has been made on the second 
recorder. Use a PC to copy the 
administrator’s officer data to the 
\WIDKEY on the USB memory 
device. For details regarding text 
files containing administrators 
officer data, see “Text Files Used 
with the Recorder” on pages 43 
- 46. Connect the USB memory 
device to the second recorder and 
perform step 3 of “Operations on a 
second recorder” again. 
[READY] lamp goes off:
This indicates that the data could 
not be correctly loaded. Perform the 
operations below in the stated order. 
If the [READY] lamp still does not 
light, consult your supplier.
  Perform “Operations on a second 
recorder” starting from step 1. 
  Perform “Operations on this 
recorder” starting from step 1. 
Administrator Setup (continued)
  Remove the USB memory device 
and perform “Operations on a second 
recorder” starting from step 1.
 
  Replace the USB memory device 
and perform “Operations on a second 
recorder” starting from step 1.
 
  Perform “Operations on this recorder” 
starting from step 1.
  
Using a P2 card
1.  
Use a PC to copy the configuration 
file∗1 created in step 3 of 
“Operations on this recorder” from 
the USB memory device to the root 
directory on a P2 card.
 
2.  Open the P2 card slot on the 
second recorder and insert a 
P2 card in the slot1
∗2. 
3.  With the P2 card slot cover 
open, keep pressing the [REC] 
button on the second recorder 
until the [READY] or [BUSY] 
lamp starts to flash (about 10 
seconds or more).
The configuration file∗1 is loaded. 
Loading takes between 20 to 50 
seconds. The [READY]
∗3 lamp lights 
when the file has been successfully 
loaded.
4.  Press the [STOP] button.
The second recorder reboots and 
will now run using the same settings 
as this recorder.
∗1  The configuration file is the file 
with the “.CFG” extension. The 
configuration file contains all 
information set on this recorder 
excluding the following data. 
   • AG-CPD15 Operating Time
   • FAN Operating Time
   • CAM1 Operating Time
   • AG-RCP30 Operating Time
   • LCD Lighting Time
   • AG-CPD15 Version
   • BIOS Creation Date
   • Microcontroller Version
   • AG-RCP30 Version
   • Last errors 
						

							92
Administrator Setup (continued)
 Factory  Default
All recorder settings∗ can be 
returned to their factory defaults. 
Note that the recorder will not 
revert to user made settings 
after being reset to their factory 
defaults. Make sure you really 
want to return all settings to 
their factory defaults before 
performing the following steps.
 
1.  Select [Service] - [Operations] - 
[Factory Default], and press [
] 
to confirm the entry.
A confirmation dialog box appears.
2.  Select “Exec”, and accept by 
pressing the [
] button.
The recorder will reboot and start up 
in the factory default settings. 
Select “Cancel” to cancel returning 
to the factory defaults.
∗  The following settings do not return to 
their factory defaults. 
   • AG-CPD15 Operating Time
   • FAN Operating Time
   • CAM1 Operating Time
   • AG-RCP30 Operating Time
   • LCD Lighting Time
   • AG-CPD15 Version
   • BIOS Creation Date
   • Microcontroller Version
   • AG-RCP30 Version 
						

							Menu
Camera
Audio
Restore
Setup/Info
RecCheck
Archive
Audio
Audio1 Test (Press ENTER Key)
Audio2 Test (Press ENTER Key)
Audio2 SelectINCAR
File List [1/4]
2006-08-21  14:18:56
2006-08-21  15:49:04
2006-08-21  20:17:46
2006-08-21  14:27:32
2006-08-21  16:00:04
ENTER
RETURNMENU
2006-08-22  20:17:58
2006-08-22  17:42:08 2006-08-22  12:51:37
2006-08-22  20:01:35
2006-08-22  20:16:58
Auto Focus (ENTER)
Manual FocusNF
AE[-2  --  +2]0
Auto Focus (ENTER)
Manual FocusNF
AE[-2  --  +2]0
LPR ModeLPR
LPR Shutter Speed1/1000
LPR ZoomX 1.0
Auto Focus (ENTER)
Manual FocusNF
AE[-2  --  +2]0
LPR ModePATROL
Patrol Shutter SpeedAUTO
Patrol ZoomX 1.0
93
Menu Screen of the Remote 
Control Panel (separately sold)
Use menus provided by the Remote Control Panel to set up and adjust this unit. 
  When the [MENU] button is pressed while recording is being stopped 
in the live screen
Menu List
• Menu top screenCamera (see pages 56 - 58)
When [Init LPR Mode] is set to 
“DISABLE”:
Audio (see page 59) Archive (see page 68)When [Init LPR Mode] is set to 
“ENABLE” and [LPR Mode] is set 
to “LPR”:
When [Init LPR Mode] is set to 
“ENABLE” and [LPR Mode] is set 
to “PATROL”:
RecCheck (see page 64)
A trial shoot can be performed.
Administrator Operations on the 
Remote Control Panel (separately sold) 
						

							Restore
ENTER
MENURETURN
Start Restoring Files.
RestoreCancel
Setup/Info
Officer
Camera LED
Reboot
Information
On Screen Type
Admin
OFF
ON
Information 
AG-CPD15(USA) Slot1 : AJ-P2C016RG
Slot2 : AJ-P2C032RG93 Days 62 Days  Microcontroller
AG-RCP30Ver.
Ver.
Ver.3.30.006.0
3.10.002.4
3.10.003.1
Last Errors
Menu
Camera
Audio
Restore
Setup/Info
RecCheck
Archive
94
Menu List (continued)
Restore (see page 71)Setup/Info
(see pages 52, 53, 54, 59, 60, 72, 73)
Information (see page 72) • Menu top screen
Officer (see page 98)
The Officer setup top screen 
appears.
Admin (see pages 99 - 101)
The Setup/Admin top screen 
appears. 
This opens a menu that only 
administrators can manipulate. 
						

							Menu
Camera
Setup/Info
Audio
Audio
Audio1 Test (Press ENTER Key)
Audio2 Test (Press ENTER Key)
Audio2 SelectINCAR
Auto Focus (ENTER)
Manual FocusNF
AE[-2  --  +2]0
Auto Focus (ENTER)
Manual FocusNF
AE[-2  --  +2]0
LPR ModeLPR
Patrol Shutter SpeedAUTO
Patrol ZoomX 1.0
Auto Focus (ENTER)
Manual FocusNF
AE[-2  --  +2]0
LPR ModePATROL
Patrol Shutter SpeedAUTO
Patrol ZoomX 1.0
Setup/Info
Officer
Camera LED
Reboot
On Screen Type
Admin
OFF
ON
95
Menu Screen of the Remote 
Control Panel (separately sold)
  When the [MENU] button is pressed while the live screen is being 
recorded
Menu List (continued)
• Menu top screen
Audio (see page 59) Setup/Info
(see pages 52, 53, 54, 59, 60, 72, 73)
Officer (see page 98)
The Officer setup top screen appears.
Admin (see pages 99 - 101)
The Setup/Admin top screen appears. 
This opens a menu that only 
administrators can manipulate.
Camera (see pages 56 - 58)
When [Init LPR Mode] is set to 
“DISABLE”:
When [Init LPR Mode] is set to 
“ENABLE” and [LPR Mode] is set 
to “LPR”:
When [Init LPR Mode] is set to 
“ENABLE” and [LPR Mode] is set 
to “PATROL”: 
						

							Menu
Archive
Audio
Setup/Info
Restore
Restore
ENTER
MENURETURN
Start Restoring Files.
RestoreCancel
Setup/Info
Officer
Reboot
Information
On Screen Type
Admin
OFF
Audio
Audio1
Audio2
OFF
OFF
File List [1/4]
2006-08-21  14:18:56
2006-08-21  15:49:04
2006-08-21  20:17:46
2006-08-21  14:27:32
2006-08-21  16:00:04
ENTER
RETURNMENU
2006-08-22  20:17:58
2006-08-22  17:42:08 2006-08-22  12:51:37
2006-08-22  20:01:35
2006-08-22  20:16:58
Information 
AG-CPD15(USA) Slot1 : AJ-P2C016RG
Slot2 : AJ-P2C032RG93 Days 62 Days  Microcontroller
AG-RCP30Ver.
Ver.
Ver.3.30.006.0
3.10.002.4
3.10.003.1
Last Errors
96
  When the [MENU] button is pressed in the playback screen
Menu List (continued)
• Menu top screen
Restore (see page 71)
Setup/Info
(see pages 52, 53, 54, 72, 73)Audio (see page 68) Archive (see page 68)
Officer (see page 98)
The Officer setup top screen appears.
Admin (see pages 99 - 101)
The Setup/Admin top screen appears. 
This opens a menu that only 
administrators can manipulate.
Information (see page 72) 
						

							Menu
Restore
Setup/Info
Archive
Restore
ENTER
MENURETURN
Start Restoring Files.
RestoreCancel
File List [1/4]
2006-08-21  14:18:56
2006-08-21  15:49:04
2006-08-21  20:17:46
2006-08-21  14:27:32
2006-08-21  16:00:04
ENTER
RETURNMENU
2006-08-22  20:17:58
2006-08-22  17:42:08 2006-08-22  12:51:37
2006-08-22  20:01:35
2006-08-22  20:16:58
Setup/Info
Officer
Reboot
Information
Admin
Information 
AG-CPD15(USA) Slot1 : AJ-P2C016RG
Slot2 : AJ-P2C032RG93 Days 62 Days  Microcontroller
AG-RCP30Ver.
Ver.
Ver.3.30.006.0
3.10.002.4
3.10.003.1
Last Errors
97
Menu Screen of the Remote 
Control Panel (separately sold)
  When the [MENU] button is pressed in the “Archive” screen, Officer 
Setup top screen, Setup/Admin top screen or during a “Restore” 
operation
Restore (see page 71)Archive (see page 68)
Menu List (continued)
Setup/Info
 (see pages 52, 53, 54, 72, 73)
Officer (see page 98)
The Officer setup top screen appears.
Admin (see pages 99 - 101)
The Setup/Admin top screen appears. 
This opens a menu that only 
administrators can manipulate.
Information (see page 72) 
						

							Officer 
Officer1 Officer1 Info 
ID : PAN00627 
Operation Key Lock 
Officer2 
Name : John Smith
OFF 
Officer2 Info 
ID : PAN01945 
Name : Jane White
Officer 
Officer1 Officer1 Info 
Operation Key Lock 
Officer2 
OFF 
Officer2 Info 
Load Delete 
Load Delete 
ID : PAN00627Name : John Smith
ID : PAN01945Name : Jane White
Officer 
Officer1 Officer1 Info 
Operation Key Lock 
Officer2 
OFF 
Officer2 Info 
Select Delete 
Select Delete 
ID : PAN00627Name : John Smith
ID : PAN01945Name : Jane White
Setup/Info
Officer
Admin
Menu
Setup/Info
98
•  Officer setup top screen (see pages 52 - 54)
  There are three types of officer setup top screens; one for each officer setup 
method.


Menu List (continued)
  When the [MENU] button is pressed in the Officer Setup top screen 
during recording
Setup/Info 
(see pages 52, 53, 54, 73)Officer (below)
The Officer setup top screen appears.
Admin (see pages 99 - 101)
The Setup/Admin top screen appears. 
This leads to the administrator-only 
menu, and recording is stopped. 
						

							Setup/Admin [1/2]
Rec/Play
Date/Time
OSDTrigger
Management ModeCamera
Registration
Programed Rec
Date/Time
TimeZone
yyyyMM HH mmss dd
Style
Date/Time
Eastern DSTISO
09 /28 /13:50:462006
Rec/Play [1/3] 
PowerOff Time 
Init Audio2 In Select 
Rec Continue Time Resolution / RecRate 
Init Camera Select 
PowerOn Rec 
Loop Rec 120 min 1 INCAR OFF 
Q-512kbps CONTINUE 
Intermittent Rec
Rec/Play [2/3] 
PreRec Time (Video) 
PostRec Time (Video) 
Rule of Filename Init Audio2 Rec
PreRec Time (Audio) 
PostRec Time (Audio) 90 sec 90 sec 90 sec 90 sec WT ONInit On Screen TypeOFF
Rec/Play [3/3] 
Head of File
Play Mode
Trigger / MarkerSINGLE
YESYES
Skip Target
Init Audio Out (Play)BOTHGPIO9 for ErrorENABLEGPIO9 for RecENABLE
Programed RecStart End DurationDaily-::--
MonON0215:080005 : 45 min:--
Tue-::--
WedON0000:000024 : 00 min:--
ThuON1600:080016 : 00 min:--
FriON0800:170009 : 00 min:--
Sat-::--
Sun-::--
99
Menu Screen of the Remote 
Control Panel (separately sold)
•  Setup/Admin top screen (1)-1
(see pages 73, 74)
Date/Time (see page 79)Rec/Play (see pages 75 - 78)
Menu List (continued)
Programed Rec (see page 78) 
						

							Setup/Admin [1/2]
Rec/Play
Date/Time
OSDTrigger
Management ModeCamera
Registration
Programed Rec
Camera [1/2]
Zoom Limit
Init Backlight
AutoZoom MagnificationFlip
Init Camera LEDAutoZoom Time
AGC Level
Init AE ShiftX 22HIGHOFF0OFFX 103 secON
Camera [2/2] 
Init IR Mode IR Level AUTOLOW IR Time30 secAUTO FOCUSPRESETInit LPR ModeDISABLE
Registration 
Load AdminList Admin
Load OfficerList Officer
Load Event TypeList Event Type
Trigger GPIO 
Action
DetectionPrintableTrigger1 NONEHOFF
ON 
Trigger2 NONEHOFFTrigger3 NONEHOFFTrigger4 NONEHOFFTrigger5 NONEHOFFTrigger6 NONEHOFFTrigger7 NONEHOFFTrigger8 NONEHOFF
OSD  OSD 
TriggerDisplay Position 
Contents 
Source@AreaON L-Upper 
ON
OFFTimeON
Management Mode
Management of Officer Setup
Operation Key LockSetting MethodAUTOOFF
100
•  Setup/Admin top screen (1)-2
(see pages 73, 74)
Camera (see pages 81, 82)Registration (see page 79)
Trigger (see page 80)
OSD (see pages 80, 81)
Management Mode (see page 83)
Menu List (continued)