Panasonic Memory Card Portable Recorder Player Ajhpm110p Operating Instructions

Setup: Item Settings141
 Setup
3In the write confirmation screen that appears, select 
SET to write or EXIT to cancel writing and return to 
the previous screen. 
 You can edit the title before writing the file. Enter text at 
the flashing cursor that indicates the title. 
 A completion message appears when the write progress 
bar closes. 
1Press the MENU button, select A12 CARD FORMAT 
from USER1 in the SETUP menu and press the SET 
button. 
2The format confirmation screen appears. 
 Press the SET...

142Setup: Time Code, User Bit and CTL
Time Code, User Bit and CTL
The time code is used when the time code signal generated 
by the time code generator is to be recorded. The time code 
values are indicated on the display and in the superimpose 
display. 
User bit refers to the 32-bit (8 digits) data frame of the time 
code signal made available to users. It allows you to record 
operator numbers and other values. The alphanumeric 
characters that can be used in the user bit are the figures from 
0 - 9...

Setup: Time Code, User Bit and CTL143
 Setup
1Engage the stop mode. 
2Use the COUNTER button to select [TC]. 
3Set the TCG switch to [EXT].
 (External time code selection)
4Make the following settings in setup menu No. 507 
(EXT TC SEL).
◆NOTE:
 When SLTC and SVITC is set and an analog composite or SD 
SDI input signal is selected, the VITC on the input video signal 
is recorded. When 1394 is selected as the input signal, the IEEE 
1394 digital input signal time code is recorded. 
 Setup menu No. 507 EXT...

144Setup: Time Code, User Bit and CTL
*1: The internal TCG value is used when a signal cannot be detected from the TIME CODE IN connector input. 
*2: The internal TCG value is used when the SLTC, SVITC and VITC cannot be detected on the input video signal. 
*3: Nothing is recorded if the SVITC and VITC cannot be detected on the input video signal.
*4: In modes other than 59.94 Hz and 50 Hz, setup menu No. 507 EXT TC SEL does not appear. The unit is locked in SLTC in this mode.
*5: When setup menu No. 040...

Setup: Time Code, User Bit and CTL145
 Setup
1Engage the stop mode. 
2Use the COUNTER button to select [CTL].
During playback, the counter displays the play position 
relative to the start position. 
Recording starts from the counter value [0:00:00:00]. 
When recording stops, the counter shows the position 
relative to the start position.
◆NOTE: 
When 23.98, 24, 59-23 or 60-24 is selected in setup menu 
No. 25 SYSTEM FREQ, there is a 1-frame delay between 
playback video and CTL.
CTL Mode
1 2 

146Setup: Superimpose Screen
Superimpose Screen
Control signals, time code and other information are indicated 
by abbreviations. 
Abbreviations:
◆NOTE: 
 [T*R] or [U*R] appears when card data could not be properly read. 
Use setup menu No. 009 (CHARA TYPE) to change the 
background of display characters in the superimposed 
display. 
◆NOTE:
 During play list playback, black text appears on a white background 
regardless of menu setting. 
Use setup menu No. 007 (CHARA H-POS) and No. 008 
(CHARA V-POS) to...

Setup: List of Compatible Input and Output Formats147
 Setup
List of Compatible Input and Output Formats
■System Frequency Settings
Use setup menu No. 25 SYSTEM FREQ to select the following input and output formats. 
*1: 2:2 pull-down
*4:  Select SDI output in setup menu No. 643 OUT MODE SEL. SDI output alternates with analog output. 
*5:  AJ-HPX2000/2100/3000 HD-SDI (1080/23.98P over 59.94i) output 
*6:  AJ-HDC27 series HD-SDI (variable frame-rate signal) output
*7: AJ-HPX2000/2100 HD-SDI (720/25P over...

148Setup: List of Compatible Input and Output Formats
*1: 2:2 pull-down
*2: 2:3 pull-down
*3:  Playback only when “2:23.98” or “5: 59-23” is selected in system menu No. 25 SYSTEM FREQ. 
*4:  Select SDI output in setup menu No. 643 OUT MODE SEL. SDI output alternates with analog output. 
*5:  AJ-HPX2000/2100/3000 HD-SDI (1080/23.98P over 59.94i) output 
*6:  AJ-HDC27 series HD-SDI (variable frame-rate signal) output
*7: AJ-HPX2000/2100 HD-SDI (720/25P over 50P) output
Recording formatInput signalSystem...

Setup: Audio V Fade Function149
 Setup
Audio V Fade Function
This section describes the differences between audio processing provided by setup menu No. 731 (PB FADE) settings. Setup 
menu No. 731 (PB FADE) settings make it possible to perform audio V fade or cut processing between clips and events during 
clip selection and playback or play list playback. 
Described below are examples that illustrate the differences in processing. 
These examples involve a clip that spans multiple P2 cards and a second...

150Setup: Audio Recording Channels Selection
Audio Recording Channels Selection
Depending on setup menu 725 - 728 (REC CH1 to 4) settings, 
the INPUT SELECT button on the front panel allows you to 
select the following input signals. When 1394 is selected, the 
input signal is recorded in its original form regardless of 
setting. 
Analog input
SDI input
Audio Recording Channels
Recorded trackRecorded signal
CH1 CH1 input/CH2 input/CH1 + CH2 inputs
CH2 CH1 input/CH2 input/CH1 + CH2 inputs
CH3 CH3...