Panasonic Memory Card Portable Recorder Player Ajhpm110p Operating Instructions

Using Play List: Audio Split Editing91
 Using Play List
Audio Split Editing
Use audio split to shift the audio IN point relative to the video IN point (audio IN point split). Note that audio channels cannot be 
selected in this procedure. This function is performed on all channels together. 
Play list example 1 Play list example 2
6/A-
6
6
6 6
4
4
4
457
7
7
7 5
5
5New play list event
Preceding audio
6/A+
7
7 5
5 4
4
4
4566
6
7
7
56
New play list event
Silent segment
Delayed audio 

92Using Play List: Audio Split Editing Use the following procedure to newly register an event 
containing an audio split. 
◆NOTE: 
 Refer to the “Adding and Registering Audio Split Point (Changing 
Registered Point)” section to add an audio split to a registered 
event. 
 First set the insert mode to INSERT. 
1Open the play list screen. 
2Use the cursor buttons to choose the location where 
you want to add the event. 
3Press the INSERT button. 
This activates the event register mode. 
4Register an IN...

Using Play List: Audio Split Editing93
 Using Play List
You can add an audio split to an event registered in the play 
list and change the audio split point. 1Open the play list screen. 
2Use the cursor buttons to select the event where you 
want to add (or change) an audio split point. 
3Press the EVENT button. 
This activates the event edit mode.
4Register the audio split point.
Use the operation buttons or search dial to look for a 
location for an audio split point. Then hold down the SPLIT 
button...

94Using Play List: Audio Split Editing
4Press the ENTRY button to finalize the change. 
◆NOTE: 
 Trimming cannot be performed beyond the start point of an 
original clip. 
 The IN, OUT and SPLIT buttons allow you to use the TRIM+/– 
button for trimming in the event register screen when the time 
code is displayed. 
Use the following procedure to cancel an audio split setting. 
1Open the play list screen. 
2Use the cursor buttons to select the event where you 
want to cancel the split setting. 
3Hold down...

Using Play List: Simplified Voice-Over95
 Using Play List
Simplified Voice-Over
This function allows you to make voice-overs and give priority to the voice-over during playback. Recording is performed on 
one or two channels. The channel input during recording can be mixed with the playback sound. 
◆NOTE: 
 The voice-over data is written to the same card storing the play list. 
Thus the play list must be saved before audio recording or an error 
will be generated and recording cannot be performed. 
 The...

96Using Play List: Simplified Voice-Over
◆NOTE:
 Input a reference signal when mixing SDI input audio. 
 IEEE1394 input audio cannot be used for voice-overs. 
1Open the play list screen. 
2Use the cursor buttons to select the event where you 
want to perform a voice-over. 
3Find the location for the voice-over.
Use the operation buttons or the search dial to find a 
location for a voice-over and press STILL  . 
4Press the A.DUB button. 
This generates an A DUB PAUSE state while a still image 
is output...

Using Play List: Simplified Voice-Over97
 Using Play List
The voice-over appears in the play list screen as shown below. 
1)Play List
 The voice-over is added to the line after an event with an 
audio start point. 
 The “No.” column shows “EX*,” not an event number.
 The “SLOT” column shows P2 card slot numbers storing 
audio data (same as P2 card slots storing the play list). 
2)Timeline
 Extended tracks are indicated in the “EXTRA” part. 
 Recorded channel numbers are also shown.
◆NOTE:
 Use the TRIM...

98Using Play List: Viewing Event Information
Viewing Event Information
You can use this function to view and confirm miscellaneous 
event information. 
1Open the play list screen. 
2Use the cursor buttons to select the event that you 
want information about. 
3Press the MENU button. 
4Use the cursor buttons to choose [PROPERTY] – 
[EVENT PROPERTY] and press the SET button. 
Information on the event appears. 
◆NOTE:
 Holding down the SHIFT button in step 2 while pressing the 
SPLIT button will also open...

Using Play List: Viewing Event Information99
 Using Play List
You can use this function to check the content of an event by 
playing if from its IN point to its OUT point. 
1Open the play list screen. 
2Use the cursor buttons to select the clip you want to 
review.
3Hold down the SHIFT button and press the PLAY   
button.
This plays back the clip from before the IN point (preroll 
time is 3 s) to beyond its OUT point (postroll time is 1 s). 
◆NOTE: 
 The preroll time and postroll time for the first and...

100Using Play List: Playing Back Play Lists
Playing Back Play Lists 
During play list playback, you can select whether the time 
code should be replaced and output as a continuous value or 
the time code of each clip should be output. You can set the 
time code start value when it is replaced at output. 
1Open the play list screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [SETTING] – 
[REPLACE TC] – [REPLACE]. 
4Select [ON] and press the SET button.
This replaces the playback time...