Panasonic Memory Card Portable Recorder AG-HPG20P AG-HPG20E Operating Instructions

1
Menu

RECORDING SETUP screen (continued)
ItemDescription of settings
INT SGThis is used to set the type of built-in signal. In SD mode, SMPTE signal and ARIB signal are set to BLACK.100%CB: 100% color bar
5%CB: 75% color barSMPTE: SMPTE color barARIB: ARIB color barBLACK: black
5M REC CH
This is used to set the number of audio channels for recording in DVCPRO (25M) or DV compressed recording format.
CH:Record in 2-channel.
CH:
Record in 4-channel.When 1394 input signal is...

List of setting menus (continued)

RECORDING SETUP screen (continued)
ItemDescription of settings
CC RECOnly when 59.94 Hz has been setThis is used to select whether to record closed caption signals superimposed onto  SD-SDI input signals.ON:Record closed caption signals.OFF:Not record closed caption signals.When 1394 has been selected as an input signal, the closed caption signals superimposed onto the input signal is recorded regardless of what setting is made on this menu.
        The...

        The underlined settings are the factory mode settings.

Menu
RECORDING SETUP screen (continued)
ItemDescription of settings
WIDE SELECTThis is used to set whether to record WIDE information when the setting menu “SYS FORMAT” has been set to 480/60i or 576/50i.WIDE: RecordNORMAL: Not recordWhen 1394 input has been selected on the setting menu “INPUT SELECT”, the input signal information is recorded.
COMP MODESelects the compression method used during video recording.DARK:Records video...

List of setting menus (continued)
        The underlined settings are the factory mode settings.

TIMECODE SETUP screen (continued)
ItemDescription of settings
EXT UB REGENThis is used to select whether to clone the incoming user's bit information, or generate new user's bit information.ON:
 
The signals are recorded using the user’s bit of the external input signal selected on 
the setting menu “INPUT SELECT”.OFF:The signals are recorded using the user’s bit selected on the setting...

        The underlined settings are the factory mode settings.
5
Menu
TIMECODE SETUP screen (continued)
ItemDescription of settings
VITC BLANKThis is used during playback to set whether to output VITC signal to the position set on the setting menu “VITC POS-1” or “VITC POS-2”.BLANK:Not outputTHRU:OutputThis setting is effective only for VIDEO output and SD-SDI output.
VITC POS-1This is used to set the insert position of VITC signal.(When 59.94 Hz has been set)10L  I16L  I
0L
(When 50Hz has...

List of setting menus (continued)
        The underlined settings are the factory mode settings.
6
TIMECODE SETUP screen (continued)
ItemDescription of settings
VITC POS-
This is used to set the insert position of VITC signal.(When 59.94 Hz has been set)10L  I
1L
  I
0L
(When 50Hz has been set)
L
  I
1L
  I
L
You cannot select the same line as the lines for “VITC POS-1” on the “TIMECODE SETUP” screen or “UMID POS” on the “AV OUT SETUP” screen.This setting is...

        The underlined settings are the factory mode settings.

Menu
SW MODE screen
ItemDescription of settings
USER1This is used to set which function is to be assigned to the USER1 button.INPUT SEL:Input signal setting (Page 90)SYS FORMAT:The system format is selected. (Page 90)REC FMT/SD:The recording format for SD is selected. (Page 90)REC FMT/HD:The recording format for HD is selected. (Page 90)SHOT MARK:A shot mark is recorded on the clip. (Page 54)TEXT MEMO:A text memo is recorded....

        The underlined settings are the factory mode settings.
List of setting menus (continued)

PLAYBACK FUNCTIONS screen
ItemDescription of settings
REPEAT PLAYThis is used to set repeat playback. (Page 59)ON:After playing back the last clip, the first clip is played back in succession.OFF:After playing back the last clip, playback stops. Repeat playback is not performed when playing back from the bottom of the text memo screen.If a P2 card is ejected during repeat playback, playback stops...

        The underlined settings are the factory mode settings.

Menu
PLAYBACK FUNCTIONS screen (continued)
ItemDescription of settings
SDI IN LOCKThis is used to select whether the P2 playback output signal is locked (synchronized) to the SDI input signals.INT:It is not locked (synchronized).INPUT:When the SDI input signal is present, it is locked (synchronized) to the input signal.It is not locked (synchronized) when the input signal is not present.When SDI is set on the setting menu “INPUT...

List of setting menus (continued)
        The underlined settings are the factory mode settings.
100
AV OUT SETUP screen (continued)
ItemDescription of settings
UMID RECThis is used to set whether to record UMID information.ON:RecordOFF:Not record
UMID GENThis is used to set the creation method of UMID information to be recorded when the setting menu “UMID REC” is set to “ON”.INT:The newly created UMID information is always recorded.EXT:The UMID information superimposed onto the input signals is always...