Panasonic Memory Card Portable Recorder AG-HPG20P AG-HPG20E Operating Instructions

        The underlined settings are the factory mode settings.
101
Menu
AV OUT SETUP screen (continued)
ItemDescription of settings
EMBEDDED AUDIOThis is used to set whether to superimpose the audio data onto HD-SDI output and SD-SDI output.ON:SuperimposeOFF:Not superimpose
AUDIO REF LEVELThis is used to set the normal level.
(AG-HPG0P)
FS-0
:–20dB
FS-1:
–18dB
FS-1:
–12dB
(AG-HPG0E)
FS-0:
–20dB
FS-1:–18dB
FS-1:
–12dB
SD SDI AUDIOThis is used to select the audio...

List of setting menus (continued)
        The underlined settings are the factory mode settings.
10
AV OUT SETUP screen (continued)
ItemDescription of settings
CC(F1) BLANKOnly when 59.94 Hz has been setThis is used to make ON/OFF setting of the closed caption signal in the first field output from SD-SDI output and VIDEO output.BLANK:Forced blankingTHRU:OutputIn recording/recording standby status, the closed caption signals superimposed onto the input signals are output.
CC(F) BLANK
Only when...

        The underlined settings are the factory mode settings.
10
Menu
DISPLAY SETUP screen
ItemDescription of settings
OSD OUT SELThis is used to select to output the information displayed on the LCD monitor to the video output signal and SDI output signal.LCD:The information is displayed only on the LCD monitor.LCD·VIDEO:The information is displayed both on the LCD monitor and VIDEO output.ALL:The information is displayed on the LCD monitor, VIDEO output and SDI output.When the setting menu “WFM”...

        The underlined settings are the factory mode settings.
List of setting menus (continued)
10
DISPLAY SETUP screen (continued)
ItemDescription of settings
LCD SETTINGThis is used to adjust the display level of the images on the LCD monitor. (Page 26)RETURN: No adjustmentCHANGE: Adjusted
LCD COLOR LEVELLCD BRIGHTNESSLCD CONTRASTNote that if you set all LCD adjustment values to minimum, the menu screen will become difficult to see.
LCD REVERSEThis is used to set the function for reversing the...

        The underlined settings are the factory mode settings.
105
Menu
DISPLAY SETUP screen (continued)
ItemDescription of settings
UPCON MODEThis is used to select the aspect ratio for up-conversion to HD-SDI output.S-PANEL:The magnification is changed while matching the input size to the output size along the vertical axis. (The aspect ratio is unchanged.)CROP:The magnification is changed while matching the input size to the output size along the horizontal axis. (The aspect ratio is...

List of setting menus (continued)
        The underlined settings are the factory mode settings.
106
OTHER FUNCTIONS screen
ItemDescription of settings
PC MODE SELECTThis is used to select the data transfer mode.USB HOST:USB-connected HDD can be controlled.USB DEVICE:Recognizable from a PC connected via USB
BEEP SOUNDThis is used to set the beep sound to ON or OFF. (Page 109)ON: The beep sound is outputOFF: The beep sound is not outputThe sound from the output connectors is muted when beeps are...

        The underlined settings are the factory mode settings.
10
Menu
OTHER FUNCTIONS screen (continued)
ItemDescription of settings
POWER SAVEThis is used to select the power-saving mode which is to be established when none of the buttons have been operated for 5 or so minutes.ON:The unit’s power is turned off.OFF:The unit’s power is not turned off, and it remains in the power ON mode. 
While the unit is connected by an IEEE1394 cable or USB cable to an external 
device and communicating with it,...

        The underlined settings are the factory mode settings.
List of setting menus (continued)
10
OPTION MENU screen
If [MENU/MODE CHK] is pressed with  held down on the normal display screen, OPTION MENU is displayed on the setting menu.
ItemDescription of settings
1 STATUS
The 1394 status display sub-screen is displayed.FORMAT: Format of the input or output signalsRATE: Transfer rate of the input or output signals60/50: System of input or output signalsCH: Value of the channels...

10
For your reference
Menu
Warning system table
When trouble is detected immediately after the power is turned on or during operation, the user is alerted by the power display LED and beep sound (provided that “ON” is selected for the “BEEP SOUND” setting on the setting menu “OTHER FUNCTIONS” (Page 106)).
PriorityType of warningLCD monitor screen displayPower display LEDBeep soundWarning description and record/playback operationAction to be taken
1System errorSYSTEM ERROR Cause displayed*1, blinks...

110

Power-related Q&A
No power.Has the battery or AC adapter been connected properly? Check the connections.When turning on the power, hold down [POWER] for at least 1 second.
•
•
P 21
P 22
The power suddenly goes off without warning.In order to preserve the battery charge, the power will be automatically turned off when more than 5 minutes with no operations performed have elapsed. Check the setting menu: “OTHER FUNCTIONS”–“POWER SAVE”.
•P 107
The power is turned on but it goes off immediately.Has the...