Panasonic Memory Card Camera Recorder Ajhpx3700g Operating Instructions
Have a look at the manual Panasonic Memory Card Camera Recorder Ajhpx3700g Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
101Adjustments and Settings for Recording: Handling data Adjustments and Settings for Recording 1Using the menu operations, open the screen from the FILE page. 2Turn the jog dial button to move the arrow (cursor) to the FILE NO. item. 3Press the jog dial button and the file number will flash. Turn the jog dial button to select the file (1 to 64) to be recorded. 4Press the jog dial button to enter the file number. 5Turn the jog dial button to move the arrow (cursor) to the TITLE item. 6When the jog dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established. 7Press the jog dial button again and turn it until the character to be set is displayed. When the button is turned, the character displayed is switched in the following sequence: 8Press the jog dial button to enter the character. 9Turn the jog dial button to move the arrow (cursor) to the next position (right), and repeat steps 7 and 8 to set the characters (maximum of 12). 10When the title has been input, turn the jog dial button to move the arrow (cursor) to the : position. 11When the jog dial button is pressed, the arrow (cursor) returns to the TITLE item. 12Turn the jog dial button to move the arrow (cursor) to the WRITE position. To save the lens file into the built-in memory Select the file No. Give a title to the selected file. Space:† Ð Alphabetical characters: A to Z Ð Numerals: 0 to 9 Ð Symbols: , >,
102Adjustments and Settings for Recording: Handling data 13When the jog dial button is pressed, the following message appears.14Turn the jog dial button to move the arrow (cursor) to YES, and press the jog dial button. The current white shading correction value, the flare compensation value, and the RB gain offset correction value are stored in the built-in memory of the unit.
103Adjustments and Settings for Recording: Handling data Adjustments and Settings for Recording The contents of the 8 lens files stored in the unit’s internal memory can be saved onto an SD memory card as card files under a single title. A total of 8 titles can be saved on an SD memory card. Furthermore, the 8 lens files saved under one title on an SD memory card can be loaded into the unit’s internal memory. The correlation between the lens files stored in the internal memory and lens files saved on an SD memory card is shown below. A total of 64 lens files (8 lens files
104Adjustments and Settings for Recording: Handling data 1Using menu operations, open the screen from the FILE page. 2Turn the jog dial button to move the arrow (cursor) to the CARD FILE SELECT item. 3Press the jog dial button and the card file number will flash. Turn the jog dial button to select the file (1 to 8) to be read. 4Press the jog dial button to enter the file number.
105Adjustments and Settings for Recording: Chromatic Aberration Compensation (CAC) Adjustments and Settings for Recording CAC is a function that automatically corrects registration errors mainly caused by slight chromatic aberration, which cannot be corrected with lenses, and minimizes color weepage on the images. Chromatic aberration means magnification ratio chromatic aberration. Magnification ratio chromatic aberration is caused by differences in the red (R), green (G), and blue (B) refractive indexes of a lens. The lens itself corrects chromatic aberration but the astigmatism remains in the surrounding area in particular. The zooming ratio, iris, and focal distance involves complicated chromatic aberration phenomena in a zoom lens. Images have registration errors. To correct the chromatic aberration, record the chromatic aberration characteristics of the lens for the zooming ratio, iris, and focal distance in the unit and connect a lens suitable for these characteristics. Then perform the correction in accordance with the zooming ratio, iris, and focus distance of the lens. The CAC data for the following 4 kinds of lenses are stored in the unit at the time of shipment from the factory.
106Adjustments and Settings for Recording: Chromatic Aberration Compensation (CAC) 1Insert the SD memory card with the CAC file downloaded from our support website. For downloading, refer to the following URL. https://eww.pavc.panasonic.co.jp/pro-av/ 2Open the screen from the FILE page via the menu operation. 3Select TITLE READ using the jog dial button and then press the jog dial button. The lens product number is indicated in the TITLE column. 4Select CARD FILE SELECT using the jog dial button and then press the jog dial button. 5Select the TITLE No. to be read and press the jog dial button. 6Select READ using the jog dial button and then press the jog dial button. The following screen is displayed. 7Select YES using the jog dial button and then press the jog dial button. The CAC file for the lens selected in step 4 is recorded in memory on the unit. If EMPTY is selected in MEM STORE NO.: EMPTY/1/ 2... at this time, data are recorded in available space of the CAC file numbers on the unit. If “1” is selected, the data will overwrite the contents of CAC file No. 1. If the following messages are displayed when the jog dial button is pressed, the data cannot be read out. 8To store multiple CAC files in the unit, repeat steps 3 to 7. 9To close the menu operation, press the MENU button. The setting menu disappears, and the current state of the unit is displayed.
107Adjustments and Settings for Recording: Chromatic Aberration Compensation (CAC) Adjustments and Settings for Recording 1Open screen from the MAINTENANCE page using the menu operation. The following screen is displayed. 2Select “OFF” in CAC CONTROL. 3Select the lens product number to be deleted in CAC FILE NO. using the jog dial button. 4Press the jog dial button to fix the selected operation. 5Select CAC FILE DELETE using the jog dial button and then press the jog dial button. 6When the following screen is displayed, move the arrow (cursor) to YES by turning the jog dial button and then press the jog dial button. 1Open screen from the FILE page using the menu operation. The following screen is displayed. 2Select TITLE READ using the jog dial button and then press the jog dial button. The lens product number is displayed in the TITLE part. 3Select CARD FILE SELECT using the jog dial button and then press the jog dial button. 4Select the TITLE No. of the CAC file to be deleted, and then press the jog dial button. 5Select DELETE using the jog dial button and then press the jog dial button. The following screen is displayed. 6Move the arrow (cursor) to YES by turning the jog dial button and then press the jog dial button. To delete the CAC file from the unit To delete the CAC file from the SD memory card AJ-HPX3700G-VQT1V68_eng.book 107 ページ ２００８年１０月１５日 水曜日 午後６時３８分
108Adjustments and Settings for Recording: Chromatic Aberration Compensation (CAC) If the following messages are displayed when the jog dial button is pressed, the data cannot be deleted. 7Move the arrow (cursor) to YES by turning the jog dial button and then press the jog dial button. When the write operation is completed, the following message is displayed.The following error messages are displayed in the viewfinder when CAC does not operate properly or CAC files cannot be read properly.
109Adjustments and Settings for Recording: Cinematograph Settings Adjustments and Settings for Recording Menu items used for the film production are registered together in the scene file. 1Open screen from the file page using the menu operation. 2Select READ CINEMATOGRAPH with the JOG dial button, and press the JOG dial button. 3The following screen is displayed, and move the arrow (cursor) to “YES” by turning the JOG dial button, and press the JOG dial button. Data stored in the cinematograph area of the built-in memory will be read out, and the setting is completed. 4Press the MENU button to complete the menu operation.
11 0Adjustments and Settings for Recording: Cinematograph Settings 1Display the MAIN MENU by pressing the MENU button for over 3 seconds, then open the screen from the FILE page. 2Select READ FACTORY DATA with the JOG dial button, and press the JOG dial button. 3The following screen is displayed, so move the arrow (cursor) to “YES” by turning the JOG dial button, and press the JOG dial button. Data stored in the Factory setting area of the built-in memory will be read in, and the setting is completed. 4Press the MENU button to complete the menu operation. The following are the differences between the cinematograph setting and the normal factory settings. Return Cinematograph Setting to Factory Setting Difference Between Cinematograph Settings and Normal Settings Menu settings Page Menu screen Item Factory settingCinematograph setting SYSTEM SETTING SYSTEM MODE SYSTEM MODE 1080-59.94i 1080-23.98PsF VFR OFF ON OUTPUT SEL SIGNAL FORMAT 4:2:2 4:4:4 P-10LOG OFF ON OUTPUT ITEM MENU ONLY STATUS DOWNCON MODE SQUEEZE LT-BOX HD SDI A · B OUT MARKER CENTER MARK 1 2 FRAME MARK OFF ON FRAME SIG 4:3 VISTA MONI OUT MARKER CENTER MARK 1 2 FRAME MARK OFF ON FRAME SIG 4:3 VISTA PAINT LOW SETTING„MATRIX TABLE A OFF MID SETTING„MATRIX TABLE A OFF HIGH SETTING„MATRIX TABLE A OFF „CAMERA SETTING DETAIL ON OFF VF VF DISPLAY STATUS MODE NORMAL FILM-REC LOW LIGHT LVL 35% OFF VF MARKER SAFETY MARK (A) 1 2 FRAME MARK (A) OFF ON FRAME SIG (A) 4:3 VISTA SAFETY MARK (B) 1 2 FRAME MARK (B) OFF ON FRAME SIG (B) 4:3 VISTA VF INDICATOR1 EXTENDER ON OFF GAIN ON OFF ZOOM LVL ON OFF SYSTEM MODE OFF ON VF INDICATOR3 BATTERY ON OFF AUDIO LVL ON OFF CAM OPERATION SHUTTER SPEED SYNCHRO SCAN2 ON OFF SHUTTER SELECT POSITION4 SEL 120.0deg 90.0deg POSITION5 SEL 90.0deg 45.0deg POSITION6 SEL 45.0deg 1/60 USER SW USER2 SW VF GAM REC SW MARKER SEL (USER3 SW) VF MARK VF GAM AJ-HPX3700G-VQT1V68_eng.book 110 ページ ２００８年１０月１５日 水曜日 午後６時３８分