Panasonic Memory Card Camera Recorder Ajhpx3700g Operating Instructions

171Menu: Menu Description Tables
Menu
Items/
Data SavedAdjustable 
RangeRemarks
USR SW F.RATE (1080-59.94i, 
1080-23.98PsF, 
1080-24PsF)
1FRAME
:
24FRAME
:
30FRAME
(1080-50i)
1FRAME
:
25FRAME
When the FRATE function has been 
assigned to a user button, the starting 
frame rate under VFR operation is set.
When the mode has been changed 
using other settings and the frame rate 
value set here exceeds the maximum 
frame rate allowed by the set mode, the 
maximum frame rate is changed to the 
maximum frame...

172Menu: Menu Description Tables
* This variable range is the numerical values for 59.94 Hz. For 
50 Hz, the frame rate is up to 24f. The frame rate is up to 23f in 
24PN (Native) mode.

173Menu: Menu Description Tables
Menu
OUTPUT SEL
Items/
Data SavedAdjustable 
RangeRemarks
SIGNAL 
FORMAT4:2:24:4:4Select the signal that is output from the 
HD SDI A · B connectors.
4:2:2:YP
BPR 4:2:2 format is selected.
4:4:4:RGB 4:4:4 format is selected. 
LINK A will be output from the 
HD SDI A connector, and LINK B 
from the HD SDI B connector.
–CUF –
P-10LOG ON
OFFON:P-10LOG format signal is output. 
This is valid when GAMMA 
MODE SEL is set to “FILM-
REC”, and SIGNAL FORMAT is 
set to “4:4:4”....

174Menu: Menu Description Tables
HD SDI A · B OUT MARKER
Items/
Data SavedAdjustable 
RangeRemarks
MARKER SW OFFA
B
BOTHSwitches the marker on and off.
OFF:The characters are not 
superimposed.
A:The characters are 
superimposed on the HD SDI A 
connector.
B:The characters are 
superimposed on the HD SDI B 
connector.
BOTH:The characters are 
superimposed on the HD SDI A 
connector and the HD SDI B 
connector.
–CUFR
CENTER MARK OFF
1
2
3
4
Switch the center mark.
OFF:Do not display center mark.
1:+...

175Menu: Menu Description Tables
Menu
MONI OUT MARKER
Items/
Data SavedAdjustable 
RangeRemarks
CENTER MARK OFF
1
2
3
4
Switch the center mark.
OFF:Do not display center mark.
1:+ (large)
2:Hollow (large)
3:+ (small)
4:Hollow (small)
–CUFR
SAFETY MARK OFF
1
2Select the frame type for the safety zone.
OFF:Do not display frame.
1:Box
2:Corner frame
–CUFR
SAFETY AREA 80%
:
90%
:
100%
For setting the size of the safety marker.
It is possible to set the size by units of 
1% with a fixed ratio between of width...

176Menu: Menu Description Tables
GENLOCK
Items/
Data SavedAdjustable 
RangeRemarks
GENLOCK INTEXTSwitch the camera synchronizing signal.
INT:Synchronize with the internal 
reference signal regardless of 
the reference signal input to the 
GENLOCK IN connector.
EXT:Synchronize with the reference 
signal input to the GENLOCK IN 
connector.
–CUFR
GL PHASE HD SDICOMPOSITFor selecting the output signals that lock 
phases to the signals that are input in the 
GENLOCK IN connector. Note, however, 
that in...

177Menu: Menu Description Tables
Menu
The ____ in the Adjustable Range column indicates the preset mode.
* If the remote control unit is connected, settings made from the 
menu are disabled. (The set value is displayed.)
PA I N T
RB GAIN CONTROL
Items/
Data SavedAdjustable 
RangeRemarks
R GAIN AWB 
PRE*–200
:
+000
:
+200
For setting the Rch gain when the 
WHITE BAL switch is in the [PRST] 
position.
SCUFR
B GAIN AWB 
PRE*–200
:
+000
:
+200
For setting the Bch gain when the 
WHITE BAL switch is in the...

178Menu: Menu Description Tables

179Menu: Menu Description Tables
Menu

180Menu: Menu Description Tables yWhen shooting with the MASTER GAIN set to “–3dB”, 
coloring phenomena may occur in portions of the video 
with high brightness.
The coloring phenomena can be reduced by switching the 
OUTPUT/AUTO KNEE switch to [CAM/AUTO KNEE 
OFF], setting the MANUAL KNEE menu option of the 
 screen to “ON”, and then changing the 
following menu options.
– When “HD”, “SD”, “FILMLIKE1”, “FILMLIKE2” or 
“FILMLIKE3” has been selected in the GAMMA MODE 
SEL menu option of the  screen,...