Panasonic Memory Card Camera Recorder Ajhpx3700g Operating Instructions

131Manipulating Clips with Thumbnails: Switching the Thumbnail Display
Manipulating Clips with Thumbnails
It is possible to replace thumbnails with images that include 
previously attached text memos while images are recorded 
or played back.
1Add text memos to images that you intend to change. 
Refer to [Text Memo Function] (page 47) for the method 
to add text memos.
2Select THUMBNAIL  TEXT MEMO CLIPS to display 
thumbnails of the clips with text memos.
3Place the pointer on the clip of the thumbnail...

132Manipulating Clips with Thumbnails: Shot Mark A shot mark can be added to a clip thumbnail to distinguish this clip from the others.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Use the cursor buttons to move the pointer over the clip 
to which you want to attach a shot mark.
3Press the SHOT MARKER button.
4A shot mark will be attached to the clip thumbnail under 
the pointer.
To delete a shot mark, reposition the pointer over the 
clip and press the SHOT MARKER button.

133Manipulating Clips with Thumbnails: Text Memo
Manipulating Clips with Thumbnails
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Press the THUMBNAIL MENU button and select 
THUMBNAIL  TEXT MEMO CLIPS from the thumbnail 
menu.
The clip thumbnails with text memos attached are 
displayed in the upper section of the LCD monitor. The 
lower section of the LCD monitor shows information 
about the text memo on the clip selected by the pointer.
a.Thumbnail display
b.Shows the...

134Manipulating Clips with Thumbnails: Deleting Clips
1Select a desired text memo in a clip by carrying out 
steps 1-3 for [Playing back a clip at the position where a 
text memo is recorded] (page 133).
2Move the pointer to the desired text memo, and then 
press the SET button. You can select more than one text 
memo.
3Press the THUMBNAIL MENU button to select 
OPERATION  COPY.
4Use the cursor buttons and SET buttons to select the 
destination slot. Then, select YES to start copying the 
clip. The...

135Manipulating Clips with Thumbnails: Restoring Clips
Manipulating Clips with Thumbnails
Restores clips that are defective as a result of sudden 
powering-down during recording, or removal of the P2 card 
being accessed.

136Manipulating Clips with Thumbnails: Copying Clips Selected clips can be copied to the P2 card in the desired 
slot or SD memory card.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Use the cursor buttons to move the pointer to the 
desired clip and press the SET button.
3Press the THUMBNAIL MENU button and select 
OPERATION  COPY from the thumbnail menu.
Select slot 1-5 or SD memory card as the destination.
4The confirmation window appears. Use the cursor 
buttons and...

137Manipulating Clips with Thumbnails: Setting of Clip Meta Data
Manipulating Clips with Thumbnails
Information such as the name of person who shot the video, the name of the reporter, the shooting location, or a text memo 
can be read from the SD memory card, and can be recorded as Clip Meta Data.
1Insert the SD memory card that contains the Clip Meta 
Data (metadata upload file).
2Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.

138Manipulating Clips with Thumbnails: Setting of Clip Meta Data The unit allows you to check details of metadata read from 
SD memory cards.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Press the THUMBNAIL MENU button to select META 
DATA  PROPERTY from the thumbnail menu. Then, 
the screen like this is displayed:
3Use the cursor buttons to move the pointer to the item 
you wish to check, then press the SET button.
4While viewing the settings for the metadata, use the...

139Manipulating Clips with Thumbnails: Setting of Clip Meta Data
Manipulating Clips with Thumbnails
S e l e c t  M E TA  D ATA   USER CLIP NAME from the 
thumbnail menu to select the recording method. Two options 
are available: TYPE1 and TYPE2.

140Manipulating Clips with Thumbnails: Setting of Proxy (optional) By attaching the video encoder card (AJ-YAX800G, optional) 
either to the optional slot or slot 5, it is possible to specify the 
proxy recording setting.
The video encoder card is not recognized when inserted if 
the power for the unit is turned on. Insert the video encoder 
card after turning off the power for the unit.
Select OPERATION  DEVICE SETUP  PROXY from the 
thumbnail menu to specify the setting.
For the method of...