Panasonic Matrix Switcher Wj Sx650 Operating Instructions

							71
Timer Descriptions
Example of timer event setting 
•To activate Tour Sequence 2 on Monitor 1 on January 1,
19:00 to 20:00
Schedule Mode:Daily
Active Period Designation:From Jan/01 to Jan/01
From:19:00
To:20:00
Action:Tour Sequence 2
Monitor:1
•To activate Group Sequence 3 on August 10 to 15,
19:00 to 8:00 of the next day
Schedule Mode:Daily
Active Period Designation:From Aug/10 to Aug/15
From:19:00
To:8:00
Action:Group Sequence 3
Monitor:– (Monitors assigned for Group Sequence 3)
Notes:
•Timer event will not be activated when monitors are
selected by operators with higher priority than the timer
event, displaying SETUP MENU, or being in the alarm
mode.
•Preset position and auxiliary control will not be activat-
ed for cameras selected by operators with higher priori-
ty or associated with active alarm events.
•Spot camera image or sequence display will be contin-
ued even after the active period ends.
Camera Event
With the camera event setting, camera events (auto track-
ing, etc.) can automatically be activated on the desired
time and date. Up to 128 timer events can be scheduled to
activate daily or weekly. The camera event setting is per-
formed in Schedule – Camera Event of WJ-SX650 Series
Administrator Console.
The following camera events are available. (Refer to the
operating instructions of cameras for details.)
Auto Track
• ALARM IN (Camera) – Use 
Select this setting to activate auto tracking for the ALARM
IN 1 to 4 terminals of camera. When the specified terminal
accepts an alarm input signal during the specified time,
auto tracking is started at Preset Position 1 to 4. (The cam-
era becomes the auto tracking standby mode.)
Timer Event
With the timer event setting, timer events (tour sequence,
etc.) can automatically be activated on the desired time
and date. Up to 128 timer events can be scheduled to acti-
vate weekly or on specified dates. Priority setting is also
available for each timer event. The timer event setting is
performed in Schedule – Timer Event of WJ-SX650 Series
Administrator Console.
The following timer events are available.
• Spot
The image of associated camera will be displayed on the
monitor. Preset position or auxiliary control will be activated. 
• Tour sequence
Tour sequence is activated on the associated monitor. 
• Group sequence/preset
Group sequence or group preset is activated on the associ-
ated monitor.
Time and date settings
Time and date will be specified to schedule timer events.
The following are setting items.
Note:Depending on the display format setting, time and
date may be displayed in a different format.
Setting item
Schedule Mode Always Active/
Active Period
Designation
From
ToParameter
Daily
Weekly (Sun to Sat) Always Active
Active Period
Designation
(Select the desired
dates for From
and To.)
Select the desired
time.
Select the desired
time. (From and
To can be on dif-
ferent days within
24 hours.)Remarks
Timer event is acti-
vated every day.
Timer event is acti-
vated every week. Timer event is
always activated.
Period to activate
the timer event
Timer event is acti-
vated on the speci-
fied time.
Priority setting of
this timer event is
maintained until the
specified time. 
						

							72
• ALARM IN (Camera) – Not Use
Select this setting to activate auto tracking at the specified
preset position. (Starting preset position) Auto tracking is
performed during the specified time. (The camera becomes
the auto tracking standby mode.)
Note:Auto tracking ends when an operator controls the
camera. (# remains to be displayed until the end time
of camera event.)
To start auto track again while ALARM IN (Camera) –
Not Use is being selected, perform the setting in the
setup menu of camera. (Refer to the operating instruc-
tions of camera for setting.)
BW and Scene [PATROL(S)]
• BW
ON:The camera is changed to the black and white
mode.
OFF:The camera is changed to the color mode.
AUTO:The camera is changed to the black and white
mode if the picture is dark, or the color mode if the
picture is bright enough.
_: This function is deactivated.
• Scene [PATROL(S)]
The camera is changed to the picture quality setting for the
patrol function (PATROL1(S) to PATROL4(S) and –). 
Notes:
•Each picture quality setting (PATROL1(S) to
PATROL4(S)) is memorized when the PATROL 1 to 4
setting is started. (Refer to p. 78.)
•When _ is selected, this function is deactivated.
Cleaning
Camera cleaning is performed.
Time and date will be specified to schedule camera events.
The following are setting items.
Note:Depending on the display format setting, time and
date may be displayed in a different format.Notes:
•Auto tracking and Scene [PATROL(S)] are available
only for Color CCTV Camera WV-CS954. (As of
October, 2005)
•When a camera is performing an alarm or timer event,
or being controlled by an operator, auto tracking
(ALARM IN (Camera) – Not Use) and camera cleaning
are not activated.
Setting item
Schedule Mode
Time to Activate
Camera to be
UsedParameter
Daily
Weekly (Sun to Sat)
Select the desired
time.
Select desired
camera numbers.
(001 to 999)
Multiple selections
are available.Remarks
Camera event is
activated every
day.
Camera event is
activated every
week.
Camera event is
activated on the
specified time. (For
auto tracking,
specifying the end
time is required.)
Camera to perform
the camera event 
						

							73
This chapter includes operation list, function list, and function menu flow of the terminal mode. Operators can be given restrict
levels for each operation and function according to the user level settings.
Lists of Operations and Functions
•[q] means the qbutton.
•q+ w means pressing the qand wbuttons at a time. 
• q→w means performing qbefore w.
•Refer to p. 84 Menu Flow (WV-CU950/650) for how to recall menu functions.
•CDAB means the directions to move the joystick.
Operation list of WV-CU950/650 and WV-CU360C/CJ
Terminal Mode Operation
Basic operation
Moves the cursor. Joystick CDABJoystick CDAB
• Determines the selected
parameter.
• Moves to the lower menu.
• Cancels the selection.
• Returns to the upper menu.
• Closes the search list.[MON (ESC)] [MON (ESC)]
Returns the LCD to the default
status.[MON (ESC)] or [EXIT] Not available (No LCD on this
system controller)WV-CU950/650:
Exit SETUP MENU before this
operation. (Pressing the EXIT
button can close SETUP
MENU along with this opera-
tion.)
Moves to the next page.• Shuttle ring clockwise
• Zoom wheel controller to the
rightNot availableWV-CU950/650:
You can also move to the next
page by moving the cursor to
the edge.
Moves to the previous page.• Shuttle ring counterclock-
wise
• Zoom wheel controller to the
leftNot availableWV-CU950/650:
You can also move to the pre-
vious page by moving the
cursor to the edge.
Changes the selected para-
meter.• [+] or [–] 
• JogDial clockwise or coun-
terclockwise[NEXT] or [PREV]
Enters numeric parameters. Numeric buttons Numeric buttons
Deletes the parameter. [CLEAR] [CLEAR]
Note:Details may differ depending on the function to activate. Along with this list, refer to the operating instructions of system
controller.[CAM (SET)] or top button  [CAM (SET)] WV-CU950/650 WV-CU360C/CJ Note 
						

							74
FunctionWV-CU950/650 WV-CU360C/CJ Note
Function list of WV-CU950/650 and WV-CU360C/CJ
Login
qEnters the user ID.
wEnters the password.
Logout [SHIFT] + [LOGOUT] [SHIFT] + [LOG OUT]
Monitor Selection Enter the number. (Numeric
buttons) →[MON (ESC)]Enter the number. (Numeric
buttons) →[MON (ESC)]
Monitor Lock [MON LOCK] [SHIFT] + [MON LOCK]
Camera Selection
• Selects the next camera. 
• Selects the previous cam-
era.Enter the number. (Numeric
buttons) →[CAM (SET)]
[+]
[–]Enter the number. (Numeric
buttons) →[CAM (SET)]
[NEXT]
[PREV]
Selects a camera position. Enter the number. (Numeric
buttons) →[CAM POSI]Not available
Camera selection recall
• Displays the camera image
more recently selected.
• Displays the camera image
formerly selected.[+] and [HISTORY]
[–] and [HISTORY]Not available
Not available
Recorder Selection Enter the number. (Numeric
buttons) →[RECORDER]Enter the number. (Numeric
buttons) →[RECORDER]
Tour sequence Enter the number. (Numeric
buttons) →[TOUR SEQ]Enter the number. (Numeric
buttons) →[TOUR SEQ]
Group sequence Enter the number. 
(Numeric buttons) 
→[SHIFT] + [GROUP SEQ]Enter the number. (Numeric
buttons) →[GROUP SEQ]WV-CU950/650, WV-
CU360C/CJ:
Before this operation, select a
monitor assigned to the group
sequence.
Sequence pause

• Moves the sequence one
frame to the next step.
• Moves the sequence one
frame to the previous step.
• Starts the sequence again.[SEQ PAUSE]
[+]
[–]
[SEQ PAUSE][PAUSE]
[NEXT]
[PREV]
[PAUSE]
Sequence stop [SHIFT] + [SEQ STOP] [STOP]
Group preset Enter the number. 
(Numeric buttons) 
→[SHIFT] + [GROUP SEQ]Enter the number. (Numeric
buttons) →[GROUP SEQ]WV-CU950/650, WV-
CU360C/CJ:
Before this operation, select a
monitor assigned to the group
sequence. Enter the number. 
(Numeric buttons) 
→[CAM (SET)]
Enter the number. 
(Numeric buttons) 
→[CAM (SET)]Enter the number. 
(Numeric buttons) 
→[CAM (SET)]
Enter the number. 
(Numeric buttons) 
→[CAM (SET)] 
						

							75
System Setup
• Opens SETUP MENU.
• Closes SETUP MENU.
• Time and date information
• Camera information Function WV-CU950/650 WV-CU360C/CJ Note
Open System Setup main
menu. 
→
[F1]
[F2][SHIFT] + [SETUP]
[SHIFT] + [SETUP]WV-CU950/650, WV-
CU360C/CJ:
Refer to p. 73 Operation list of
WV-CU950/650 and WV-
CU360C/CJ for SETUP MENU
operations.
Note:When you open SETUP
MENU on the monitor acti-
vating a sequence, the
sequence will be
stopped.)
On-screen display (OSD)
ON/OFF
• All the information
[F2] [CAM ID]
• Event information
• Monitor information
On-screen display (OSD)
position controlOpen OSD Position main
menu. →[SHIFT] + [OSD] +
• All the information [SHIFT] + [F1] + Joystick
CDAB[ALL] + Joystick CDAB
• Time and date information [F1] + Joystick CDAB[T&D] + Joystick CDAB
• Camera information [F2] + Joystick CDAB[CAM ID] + Joystick CDAB
• Event information [F3] + Joystick CDAB[EVENT] + Joystick CDAB
• Monitor information [F4] + Joystick CDAB[MON STATUS] + Joystick
CDAB [F4] [MON STATUS] [F3] [EVENT] Open OSD On/Off main
menu. →
[SHIFT] + [F1]
[F1][OSD] +
[ALL]WV-CU950/650, WV-
CU360C/CJ:
Every pressing the button(s)
can display all the information
→hide all the information →
display the current informa-
tion.
WV-CU950/650:
Pressing the OSD button can
also display or hide all the
OSD information.
[T&D] 
						

							76
Function WV-CU950/650 WV-CU360C/CJ Note
System Status Display Open System Status main
menu. →
• Opens System Status
Display.[F1] [OSD] + [SYS S]
• Closes System Status
Display.[F2] [OSD] + [SYS S]
Alarm History Display [ALM RECALL] [OSD] + [ALM H]WV-CU950/650, WV-
CU360C/CJ:
Every pressing the buttons
can display or hide Alarm
History Display.
Note:Alarm History Display is
not available on monitors
in the alarm mode or dur-
ing recorder selection.

• Goes to the next or previous
page.
• Skips to 10 pages forward.
• Skips to 10 pages back.• [+] or [–]
• Joystick CDAB
• Shuttle ring clockwise 
• Zoom wheel controller to the
right
• Shuttle ring counterclock-
wise
• Zoom wheel controller to the
left• [NEXT] or [PREV]
• Joystick CDAB
Not available
Not available
Alarm Acknowledgement
(ACK) 
[ACK] [ACK] 
• Displays the next alarm pic-
ture.[+] [NEXT]
• Displays the previous alarm
picture.[–] [PREV]
• Return to Alarm Mode [SHIFT] + [ACK] Not available
Alarm resetWV-CU950/650, WV-
CU360C/CJ:
An alarm whose Display
Mode setting is OFF will not
be the ACK status. The alarm
will be reset by every press-
ing the ACK button.
• Alarm Individual Reset [ACK] (During alarm ACK) [ACK] (During alarm ACK)
• Alarm Monitor Reset [ALM RESET] [RESET]
• Alarm All Reset [SHIFT] + [ALM ALL RESET]  [SHIFT] + [ALL RESET]
Alarm Suspension [SHIFT] + [ALM SUSPEND] [SHIFT] + [SUSPEND] Every pressing these buttons
will activate or cancel alarm
suspension. 
						

							77
Preset Position Registration Enter the number. (Numeric
buttons) 
→[SHIFT] + [PGM PRESET]Enter the number. (Numeric
buttons) 
→[SHIFT] + 
[PROGRAM PRESET]
Calls the preset position. Enter the number. (Numeric
buttons) →[PRESET]Enter the number. (Numeric
buttons) →[CALL PRESET]WV-CU950/650, WV-
CU360C/CJ:
Without numeric entry, the
camera will move to the home
position.
Camera Setup Open Camera Setup menu.
→WV-CU950/650, WV-
CU360C/CJ:
• Refer to p. 73 Operation list
of WV-CU950/650 and WV-
CU360C/CJ for setup menu
operations.
• Moves the cursor: Joystick
CDAB
• To perform the setting of
panning/tilting in the setup
menu, control the camera
while holding down the
SHIFT button.
• Opens the camera setup
menu
• Closes the camera setup
menu[F2] [SHIFT] + [CAM SETUP]

• Opens the special menu. /
Resets the camera setting.
• Resets all the camera set-
tings.[F3]
[F4][RESET]
[SHIFT] + [ALL RESET]
Pan/Tilt control Joystick CDABJoystick CDABWV-CU950/650, WV-
CU360C/CJ:
The camera will pan and tilt
according to the direction of
joystick movement.
WV-CU950/650, WV-
CU360C/CJ:
Lens iris will keep opening up
while this button is held down. Iris control
• Opens the lens iris. [IRIS OPEN] [IRIS OPEN][F1] [SHIFT] + [CAM SETUP]
• Closes the lens iris. [IRIS CLOSE] [IRIS CLOSE]WV-CU950/650, WV-
CU360C/CJ:
Lens iris will keep closing
down while this button is held
down.
• Resets the lens iris to the
default status.[A] [IRIS OPEN] + [IRIS CLOSE]WV-CU950/650:
You can assign another func-
tion to this button. 
The setting is performed in
Controller – Key
Assignment of WJ-SX650
Series Administrator Console. Function WV-CU950/650 WV-CU360C/CJ Note
Camera control 
						

							78
• Starts the patrol setting. [F1] [2]
• Ends the patrol setting. [F2] [3]
• Activates the patrol play. Refer to p. 79 Auto mode. [1] Patrol Focus control
• Brings the lens focus farther
from the object.[FOCUS FAR] [FOCUS FAR]WV-CU950/650, WV-
CU360C/CJ:
Lens focus will keep going
farther from the object while
this button is held down.
• Brings the lens focus nearer
from the object.[FOCUS NEAR] [FOCUS NEAR]WV-CU950/650, WV-
CU360C/CJ:
Lens focus will keep going
nearer from the object while
this button is held down.
• Adjusts the lens focus auto-
matically.[B] or top button [FOCUS FAR] + [FOCUS
NEAR]WV-CU950/650:
You can assign another func-
tion to these buttons . 
The setting is performed in
Controller – Key
Assignment of WJ-SX650
Series Administrator Console.
Zoom control
• Widen the scene. Zoom wheel controller to the
left[ZOOM WIDE]WV-CU950/650:
Lens zooming level will keep
going down while zoom wheel
controller is being moved to
the left.
WV-CU360C/CJ:
Lens zooming level will keep
going down while this button
is held down.
• Zooms the image. Zoom wheel controller to the
right[ZOOM TELE]WV-CU950/650:
Lens zooming level will keep
going up while zoom wheel
controller is being moved to
the right.
WV-CU360C/CJ:
Lens zooming level will keep
going up while this button is
held down. Function WV-CU950/650 WV-CU360C/CJ Note
Open Patrol Learn menu. →[SHIFT] + [CAM FUNC] three
times (PATROL setting menu
appears on the LED display.)
→WV-CU950/650:
For cameras for which two or
more patrol settings are avail-
able, PATROL 1 is activated.
To perform other patrol set-
tings, open the camera setup
menu or perform the camera
function.
(Refer to the operating
instructions of camera for
details.) 
						

							79
AUX 1/2

• AUX 1 (or 2) ON
• AUX 1 (or 2)  OFF [SHIFT] + [AUX1 (or 2) OFF] [SHIFT] + [AUX1 (or 2) OFF]

AUX 1 (or 2)  ON [AUX1 (or 2)  ON]
(Keep pressing.)[SHIFT] + [AUX1  (or 2) ON]
(Keep pressing.)WV-CU950/650, WV-
CU360C/CJ:
When you release the but-
ton(s), auxiliary control
becomes OFF. [AUX1 (or 2) ON] [SHIFT] + [AUX1 (or 2) ON]WV-CU950/650, WV-
CU360C/CJ:
• Mode setting is determined
by the DIP switch settings of
auxiliary device (receiver,
etc.). (Cameras support only
the latch mode.)
• To activate events (sequence,
etc.), set the camera or auxil-
iary device to the latch mode.
Open BW Mode main menu.
→ BW Mode Switching[SHIFT] + [CAM FUNC] two
times (BW setting menu
appears on the LED display. )→
[F1] • Changes to the BW mode. [1]
[F2] • Changes to the color mode. [2]
[F3] • AUTO 1 Not availableWV-CU950/650:
If the camera has only one
AUTO mode, press this but-
ton.
[F4] • AUTO 2 Not available
[WIPER]
(Keep pressing.) Wiper ON [SHIFT] + [WIPER] (Keep
pressing.)WV-CU950/650, WV-
CU360C/CJ:
When you release the but-
ton(s), wiper control becomes
OFF Function WV-CU950/650 WV-CU360C/CJ Note
Auto pan Open Auto Pan Setup menu.
→[SHIFT] + [CAM FUNC] four
times (AUTO MODE setting
menu appears on the LED
display. )→
[F1] • Activates the auto pan. [1]WV-CU360C/CJ:
Pressing [AUTO PAN] is also
available.
[F2] • Reverses the auto pan
range.Not available
[F3] • Sets the start point of auto
pan.Not available
[F4] • Sets the end point of auto
pan.Not available
Open Auto Mode main
menu. → Auto mode [SHIFT] + [CAM FUNC] four
times (AUTO MODE setting
menu appears on the LED
display. )→
[F1] • Sequence [3]
[F2]  • Sort [2]
[F3] • Auto pan [1]
[F4] • Patrol Refer to p. 78 Patrol. 
						

							80
• Disk connected to COPY 2 [SHIFT] + [F4]–WV-CU360C/CJ:
You cannot select COPY 2 for
WJ-HD300 Series. • HDD normal/event record-
ing area
• HDD copy area [F2]–
• Disk connected to COPY 1 [F3]–
• Disk connected to COPY 2 [F4]–WV-CU950/650:
You cannot select COPY 2 for
WJ-HD300 Series.
Disk selection (2) Open Search Mode menu.
→Not availableWV-CU950/650:
Search list is automatically
displayed by performing this
operation. • HDD normal/event record-
ing area
• HDD copy area
• Disk connected to COPY 1[SHIFT] + [F1]
[SHIFT] + [F2]
[SHIFT] + [F3]–
–
–WV-CU360C/CJ:
You cannot select COPY 1 for
WJ-HD300 Series. [F1]–
WV-CU950/650:
You cannot select COPY 1 for
WJ-HD300 Series. Disk selection (1) Open HD300 DiskSelect
menu. →Not availableWV-CU950/650:
Search list is automatically
displayed by performing this
operation. • Opens the recorder setup
menu.[F1] [SHIFT] + [SETUP]
Recorder Setup Open System Setup menu.
→WV-CU950/650,
WV-CU360C/CJ:
• Refer to p. 73 Operation list
of WV-CU950/650 and WV-
CU360C/CJ for setup menu
operations.  All Cameras Control Open All CAM Control main
menu. →WV-CU950/650:
This operation is not available
for cameras restricted by the
operators setting. Function WV-CU950/650 WV-CU360C/CJ Note
Function WV-CU950/650 WV-CU360C/CJ Note[DEF ON] Defroster
• ON [SHIFT] + [DEF ON]
• OFF [SHIFT] + [DEF OFF] [SHIFT] + [DEF OFF]
• All home positions [F1] Not available
• All auxiliaries OFF [F3] Not available
Activates a camera function Enter the number. (Numeric
buttons) →[CAM FUNC][SHIFT] + [CAM FUNC] 
(F and underlines appear on
the LED display of system
controller.) →Enter the num-
ber. (Numeric buttons) 
→[CAM (SET)]WV-CU950/650,
WV-CU360C/CJ:
Refer to the operating instruc-
tions of cameras for camera
function numbers.
• Closes the recorder setup
menu.[F2] [SHIFT] + [SETUP]
Recorder control