Panasonic Lumix DMC FX5 User Manual

Playback (advanced)
91
4Shift the picture and press the 
shutter button fully to set.
5Select [YES] or [NO] and set it.
 When you select [YES], the picture 
is overwritten.
 When the original picture is 
protected, you cannot overwrite the 
trimmed picture.
 Close the menu by pressing the 
[MENU] button 2 times after 
finishing the trimming.
¬Suggestions/Tips ¬
 The following pictures cannot be 
trimmed.
– Pictures equal to or smaller than 
640k480 pixels
– Pictures recorded with setting the 
picture...

Playback (advanced)
92
Formatting the Card
Preparation
 Set the mode dial to [ ]. (P29)
1Select [FORMAT].
2Select [YES] to format.
¬Suggestions/Tips ¬
 Usually, it is not necessary to format 
the card (initializing). Format the card 
when the message [MEMORY CARD 
ERROR] appears.
 If the card has been formatted by a PC 
or other equipment, format the card on 
the camera again.
 After formatting, recorded pictures and 
any other data cannot be recovered.
 If the card is formatted all images 
and data...

Playback (advanced)
93
Playing Back Pictures with a TV Screen
ªPlaying back pictures with AV cable (supplied)
 Turn the camera and the TV off.
1Connect the AV cable to the
[AV OUT] socket of the camera.
 Align the [2] mark on the AV cable 
and the [1] mark on the [AV OUT] 
socket.
2Connect the AV cable to the video 
input and the audio input sockets 
of the TV.
 Yellow: to the video input socket
 White: to the audio input socket
3Turn the TV on and select external 
input.
4Turn the camera on and then...

Playback (advanced)
94
Before Connecting with USB Connection 
Cable
Select the USB communication system according to the OS of your PC or your 
printer before connecting them to the camera with the USB connection cable 
(supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P25)
1Select [USB MODE].
(In the recording mode)2Select [Mass Storage] or [PTP].
RECSETUP3/3
LANGUAGEENGUSB MODE
EXITSET SELECTMENU
MENU
SETREVIEW
WB
SETREVIEW
WB
SETREVIEW
WB
USB
SETREVIEW
WB
SETREVIEW
WB
SETSELECT
Mass...

Playback (advanced)
95
ªWhen using Windows 2000 Professional, Windows Me, 
Windows 98/98 SE or Mac OS 9.x
• When connecting the camera to a PC, do not set [USB MODE] to [PTP]. (When the camera is shipped, [Mass Storage] is selected.)
 When using Windows 98/98 SE, install the USB driver before connecting. (When 
using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you do not have to install 
the USB driver.)
 When connecting to a PC which includes the 
above-mentioned OS with setting the [USB MODE] to...

Playback (advanced)
96
Connecting to a PC (Mass Storage)
1Turn the camera on and then set 
[USB MODE] to [Mass Storage]. 
(P94)
2Connect the camera to a PC via 
the USB connection cable 
(supplied).
[Windows]
The drive appears on the 
[My Computer] folder.
 If it is the first time for you to 
connect the camera to a PC, the 
required driver is installed 
automatically so that the camera 
can be recognized by the Windows 
Plug and Play, then it appears on 
the [My Computer] folder.
[Macintosh]
The drive...

Playback (advanced)
97
Connecting to a PC (PTP)
Do not follow the setting below on the OS except for Windows XP and Mac OS X.
1Turn the camera on and then set 
[USB MODE] to [PTP]. (P94)
2Connect the camera to a PC via 
the USB connection cable 
(supplied).[Windows]
The camera icon appears on the 
[My Computer] folder.
 If it is the first time for you to 
connect the camera to a PC, the 
required driver is installed 
automatically so that the camera 
can be recognized by the Windows 
Plug and Play, then...

Playback (advanced)
98
¬Suggestions/Tips ¬
 Refer to P95 carefully when connecting to the OS except for Windows XP and Mac 
OS X with setting [USB MODE] to [PTP].
 The flash/access indicator lights during communication.
 When connecting to a PC, we recommend using the AC adaptor as the power 
source.
 If the remaining battery power becomes low during communication, the status 
indicator blinks and the alarm beeps. In this case, stop the communication. Then 
turn the camera off and charge the...

Playback (advanced)
99
Connecting to a Printer
By connecting the camera directly to a printer supporting PictBridge or USB 
Direct-Print via the USB connection cable (supplied), you can select the pictures to 
be printed or start printing.
1Turn the camera on and then set 
the [USB MODE] to [PTP] 
(PictBridge) or [Mass Storage] 
(USB Direct-Print). (P94)
2Turn on a printer.
3Connect the camera to the printer 
via the USB connection cable 
(supplied).
¬Suggestions/Tips ¬
 Ask the manufacturer of the...

Playback (advanced)
100
Using a Printer (PictBridge)
Preparation
 Connect the camera to a printer. (P99)
 Set the paper size and print quality. (Read the printer operating instructions.)
ªSingle picture
1Select [SINGLE PICTURE].
 The screen shown in step 2 
appears when DPOF print is not 
set or the printer does not support 
DPOF print.
2Select the picture to print.
3Select [YES] and print.
 Press the [DISPLAY] button to print 
the date. (Only when connecting to 
the printer supporting to printing...