Panasonic Light Pen 2 Operation Manual

11
Use with Windows (continued)
Switching quickly between mouse and pen modes
Click the pointer or pen (Red Pen/Green Pen/Blue Pen/Marker Pen) tip above or below the screen to switch 
between mouse and pen modes.
・ In Pen mode, the color selected last time will be automatically switche\
d to.
Changing the position of the tool bar & showing/hiding the tool bar
You can change the tool bar position, as well as set whether or not to sh\
ow it.
・  If you select outside the left screen edge with the light pen...

12
Use with Windows (continued)
PowerPoint Tool
Step 1. Click the Mouse icon on the task bar.
Step 2. Set “PowerPoint Tool Setting” to “On”. 
Step 3.  When a PowerPoint file is in “Slide Show mode”, the PowerPoint Tool bar appears on the right side of the 
screen.
When you quit PowerPoint mode, the PowerPoint Tool automatically disappears.
The PowerPoint Tool does not support PowerPoint 2002.
Icon Description
Shrink Tool bar
Change Tool bar side
Mouse
Mouse Right Key
Red pen
Erase
Clear all
Previous...

13
Use with Mac OS
Interactive functions use the LightPenII 2.1.1 software.
System requirements
In order for the interactive functions to work properly, the computer system must meet the following requirement.
System requirementsSupported OS
Mac OS X 10.5 –10.6.4 (except 10.6.3)
CPUIntel processor
Memory512 MB or more
Free disk space10 MB or more
Operation is not guaranteed for all computers that meet the above condit\
ions.
Install LightPenII software
Step 1: Insert the CD-ROM into the CD-ROM drive....

14
Use with Mac OS (continued)
Setup the interactive functions
Calibration
In order to allow the sensor of the projector to accurately detect the position of projected screen,  please execute 
the calibration first.
Step 1. Connect the projector and Mac using the included USB cable.
Step 2.  Double-click the “LightPenII 2.1.1.app” or “LightPenII 2.1.1.app” shortcut icon to launch the program. The 
icon appears in the menu bar on the top of the screen and the tool bar appears at the right side of the...

15
Use with Mac OS (continued)
Set to launch at start up
Step 1: Left-click the “LightPenII” icon in the menu bar.
Step 2: Select “StartUp” so that a check mark appears next to it as shown below.
Hint
     When “StartUp” is selected, the “LightPenII” software will automatically be launched the next time that Mac OS 
is started up, and the icon will appear in the menu bar at the top of the screen and the tool bar will appear at the 
right side of the screen.
    To disable the “StartUp” setting, click...

16
Using the interactive functions
Double-click the shortcut icon of “LightPenII 2.1.1.app” or “LightPenII 2.1.1.app”. The icon will appear in the menu 
bar at the top of the screen and the tool bar will appear at the right side of the screen.
Functions of the icons in the tool bar
            
Tool bar position
Moves tool bar to right or left side of screen
Mouse
Enables mouse function
Mouse Right Key
Enables right-click function
Mouse Double Click
Enables double-click function
Pen thickness
Selects pen...

17
Use with Mac OS (continued)
Mouse mode and Pen mode
After startup, the Mouse mode is active. Use the pointer or pen to move the mouse pointer.
・ When using the pen, press the tip of the pen to the screen.
・ When using the pointer, press and hold down the button during use.
・ When in mouse mode, press and hold the pointer button or tip of the pen for about 2-3 seconds to right-click.
・  Select the right-click or double-click icon from the tool bar, and move the cursor to a file you want to open and...

18
Use with Mac OS (continued)
Switching quickly between mouse and pen modes
Click the pointer or pen (Red Pen/Green Pen/Blue Pen/Black Pen/Marker Pen) tip above or below the screen to 
switch between mouse and pen modes.
・ In Pen mode, the color selected last time will be automatically switched to.
Changing the position of the tool bar & showing/hiding the tool bar
You can change the tool bar position, as well as set whether or not to sh\
ow it.
・  If you select outside the left screen edge with the...

19
Use with Mac OS (continued)
Disabling interactive functions
Step 1. Left-click the “LightPenII” in the menu bar.
Step 2. Select “Exit” to quit the software.
    (You can do this from either the screen or the computer.) 

20
Troubleshooting
Q1. There is a "LightPenII cannot be found" message.
A: Check the following things.
1.  Confirm that the USB cable is connected securely and that the USB port is functioning properly .
If the following warning appears, connect the projector and the computer using the included USB cable, and 
 
z
then restart the program.
  When using Windows, if the LightPenII icon appears like (A) below , the USB connection is not functioning. 
 
z
In this case, confirm that the USB cable is...