Panasonic Light Pen 2 Operation Manual

Operation Manual 
Light Pen II  
[Windows / Mac OS] 
ENGLISH 

2
Contents
The illustrations and screenshots in this manual may be different from those on your computer.
Expressions used in this document Pages to reference within this document are indicated as (See page ○○).
Contents   ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  · 2
How to use the pointer and pen   ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·  ·...

3
How to use the pointer and pen
Pointer
Before using the pointer
Screw the long rod into the body of the pointer until it is secure.
Install batteries. (See page 4) 
How to use the pointer  
While pressing the button, when the LED lamp lights, the  
infrared ray LED at the end of the rod also lights. This is sensed by   
the infrared ray sensor on the front of the projector, and the location   
of the tip of the pointer is detected.
Procedures for use: 
1)  Place the tip of the pointer anywhere on the...

4
WARNING:
Do not use or handle the batteries improperly, and the following.
Use A A A /R03 or A A A /LR03 batteries. 
• 
Change both batteries at the same time. • 
Do not mix and use old and new batteries together. • 
Keep batteries away from water and other liquids. • 
Keep the pen and pointer away from heat and humidity. • 
Do not drop the pen or pointer. • 
If a battery should leak, wipe the leakage away completely and put in new batteries.• 
Installing the wrong type of batteries could cause them...

5
Use with Windows
Interactive functions use the LightPenII 2.00 software. 
System requirements
In order for the interactive functions to work properly, the computer system must meet the following requirements.
System requirements
Supported OSMicrosoft Windows XP, Vista, 
Windows 7 (32bit/64bit)
CPU 2.0 GHz or faster Intel Pentium 4 
(dedicated GPU is recommended)
Memory 512 MB or more
Free disk space 80 MB or more
Operation is not guaranteed for all computers that meet the above condit\
ions.
Install...

6
Use with Windows (continued)
Setup the interactive functions
Calibration
In order to allow the sensor of the projector to accurately detect the position of projected screen,  please execute 
the calibration first.
Step 1. Connect the interactive camera on the projector and PC using a USB cable. 
Step 2.  Launch the “SPIIdriver” software from the start menu or the desktop. The icon will appear in the task bar at 
the bottom of the screen and the tool bar will appear at the right side of the screen.
Step...

7
Use with Windows (continued)
Set to launch at start up
Step 1: Left-click the “SPIIdriver System” icon in the task bar.
Step 2: Select “StartUp” so that a check mark appears next to it as shown below.
Hint
When “StartUp” is selected, the “SPIIdriver System” software\
 will automatically be launched the next time that 
Windows is started up, and the icon will appear in the taskbar at the bo\
ttom of the screen and the tool bar will 
appear at the right side of the screen. 
To disable the “StartUp”...

8
Use with Windows (continued)
Using the interactive functions
Launch the “LightPenII”   software from the start menu or the desktop. The Mouse icon will appear in the task 
bar at the bottom of the screen and the tool bar will appear at the right side of the screen.
Functions of the icons in the tool bar
Mouse
Functions like a PC mouse
Red pen
Draws red lines
Green pen
Draws green lines
Blue pen
Draws blue lines
Marker
Draws marker lines
Shape tool
Draws circles, squares, triangles and straight lines...

9
Use with Windows (continued)
Shape tool 
Click the shape tool icon  to open the shape menu as shown below, and select the shape you want to draw.
Whiteboard mode  
Select the whiteboard mode icon  to make the background of the PC screen white.
The 
 (last page) and  (next page) icons are replaced by the  (background selection) and  (white 
background) icons.
1)   Select the background selection icon 
 to open the following window where you can choose the background 
that you want to use.
2) Select the...

10
Use with Windows (continued)
Editing tool 
Select the editing tool icon  to open the editing tool bar as shown below, and select the function that you need 
to use for editing. 
Icon Description
Select and move object
Rotate object
Print
Undo
Redo
Mouse mode and Pen mode
After startup, the Mouse mode is active. Use the pointer or pen to move \
the mouse pointer.
・When using the pen, press the tip of the pen to the screen.
・When using the pointer, press and hold down the button during use.
・When in...