Panasonic Lifi Hdtv Pt 50lcz70 Operating Instructions

LSQT1225 B
LIFI™ HDTV
Operating Instructions
PT-50LCZ70 / PT-56LCZ70 / PT-61LCZ70 /
PT-50LCZ7 / PT-56LCZ7 / PT-61LCZ7 /
PT-50LCZ70-K / PT-56LCZ70-K / PT-61LCZ70-KModels No.
Before connecting, operating or adjusting this product, please read the \
instructions completely.
Please keep this manual for future reference. This operating instruction book is designed for use with models PT-50LCZ\
70, PT-56LCZ70, PT-61LCZ70, 
PT-50LCZ7, PT-56LCZ7, PT-61LCZ7, PT-50LCZ70-K, PT-56LCZ70-K and PT-61LCZ\
70-K....

2
1) Read these instructions before using, connecting or adjusting this product.
2)  Keep these instructions for future reference.
3)  Heed all warnings  on the product and in this Operating Instructions manual.
4)  Follow all instructions  carefully.
5)  Do not use this apparatus near water.  For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in\
 a 
wet basement or near a swimming pool, and the like. Do not place objects\
 filled with water, such as a vase or the 
like, on top of this...

3
Getting Start ed
AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN.  \
DO NOT ALLOW 
CHILDREN TO HANDLE THE SD CARD.
 CAUTION
(1)  This Projection Display is intended to be used with the following TV stand : 
model TY-50LC7, TY-56LC7, TY-61LC7, TY-50LC70, TY-56LC70, or TY-61LC70 f\
or the PT-50LCZ70, 
PT-56LCZ70, PT-61LCZ70, PT-50LCZ7, PT-56LCZ7, PT-61LCZ7, PT-50LCZ70-K, P\
T-56LCZ70-K, or 
PT-61LCZ70-K. Use with other stands may result in the Projection Display becoming uns\
table,...

4
Welcome to the Panasonic family of customers. We hope that you will have\
 many years of enjoyment from your new 
Projection Display.
To obtain maximum benefit from your set, please read these Instructions \
before making any adjustments, and retain 
them for future reference.
Retain your purchase receipt also, and record the serial number of your \
set in the space provided on the rear cover of 
these instructions.
Visit our Panasonic Web Site for USA : www.panasonic.com / for Canada : \...

5
Getting Start ed
To 
Start !
Use 
Now !
Enjoy 
More !
Other
Information !  IMPORTANT SAFETY INSTRUCTIONS ..................................... 2
Before Using ........................................................................\
............. 6
Location of Controls ........................................................................\
 9
Installation ........................................................................\
............... 12
Recommended AV Connections...

6
Before Using
Receiver Location
This Projection Display is intended to be used with an 
optional stand or entertainment center. Consult your 
dealer for available options.
Situate for comfortable viewing. Avoid placing where 
sunlight or other bright light (including reflections) will fall 
on the screen.
Use of some types of fluorescent lighting can reduce 
Remote Control transmitter range.
Adequate ventilation is essential to prevent internal 
component failure. Keep away from areas of excessive 
heat...

7
Getting Start ed
Remote Control Battery Installation
Requires two AA batteries (supplied).
1. While pressing in on the catch, open cover in 
direction of arrow.
2.  Install batteries in the battery compartment.
Battery polarity (+) and (-) must match the markings 
inside the compartment.
3. Press cover until it snaps shut.
•
< Side view >30º
30º
At least 
1.8 m (PT-50LCZ70/PT-50LCZ7/PT-50LCZ70-K) / 
2.0 m (PT-56LCZ70/PT-56LCZ7/PT-56LCZ70-K) / 
2.2 m (PT-61LCZ70/PT-61LCZ7/PT-61LCZ70-K).< Side view >...

8
Before Using (continued)
 Cleaning
To ensure continued excellent performance from this 
product, periodic cleaning is recommended.
Projection Display
The unit contains many 
plastic parts. For this reason 
DO NOT use benzine, 
thinner or other chemicals 
to clean the unit.
DO NOT bring into contact 
with insecticide or other 
volatile substances. DO 
NOT allow the unit to come 
into contact for extended 
periods with rubber or vinyl 
products.
Remove dirt and soiling by 
wiping with a light cloth....

9
Getting Start ed
Remote Control
1 POWER Press to turn ON and OFF.
2 SD Press to view from SD Card.
3 TV
Sets the remote to control television or 
digital television.
VCR, DBS/CBL, 
DVD Sets the remote to control other 
devices.
4 MENU Press to display Main Menu.
5  TV/VIDEO Changes Input source.
6 SUB MENU Press to display the Sub Menu.
7 FUNCTION Press to use for various functions.
8  CH 
< >Press to change channels.
9  ASPECT Changes display aspect ratio.
1
2
3 17
Location of Controls
4
5
6
7
8
9
10...

10
Location of Controls (continued)
Controls and Terminals on the Projection Display
Front View 
 Remote Control 
Sensor
1 POWER 
buttonPress to turn ON and OFF. 
(p. 24, 61, 62)
2POWER 
indicatorLights up green when power 
is ON. (p. 24, 61, 62)
3 LAMP 
indicatorLights up or flashes when the 
lamp unit is malfunctioning. 
(p. 24, 61)
123
1HDMI Input 
Terminal 3
Connect from other 
component. (HDMI 3)
2SD CARD Slot
Insert SD Card.
3 TV/VIDEO*Changes Input source.
4 VOL –+*Press to adjust TV sound.
5 CH >