Panasonic LCD Projector Pt Vx41 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Vx41 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
Technical Information ENGLISH - 81 Appendix Technical Information PJLink protocol The network function of the projector supports PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer. Control commands J The following table lists the PJLink protocol commands that can be used to control the projector. CommandControl detailsNotes POWRPower supply control Parameters 0 = Standby 1 = Power ON POWR ?Power supply status query...
Page 82
![Page 82
Technical Information
82 - ENGLISH
Appendix
Control commands via LAN
When WEB Control administrator rights password is set (Protect mode) J
Connection method z
Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and 1 )
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address :Obtain from MAIN MENU → [Network] → [Network status]
Port No. :Acquire from the WEB...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-81.png "Page 82
Technical Information
82 - ENGLISH
Appendix
Control commands via LAN
When WEB Control administrator rights password is set (Protect mode) J
Connection method z
Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and 1 )
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address :Obtain from MAIN MENU → [Network] → [Network status]
Port No. :Acquire from the WEB...")
Technical Information 82 - ENGLISH Appendix Control commands via LAN When WEB Control administrator rights password is set (Protect mode) J Connection method z Obtain the IP address and port number (Initial set value = 1 024) of the projector \ and 1 ) make a request for connection to the projector. Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address :Obtain from MAIN MENU → [Network] → [Network status] Port No. :Acquire from the WEB...
Page 83
![Page 83
Technical Information
ENGLISH - 83
Appendix
When WEB Control administrator rights password is not set (Non-protect J
mode)
Connection method z
Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and 1 )
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address :Obtain from MAIN MENU → [Network] → [Network status]
Port No. :Acquire from the WEB control...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-82.png "Page 83
Technical Information
ENGLISH - 83
Appendix
When WEB Control administrator rights password is not set (Non-protect J
mode)
Connection method z
Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and 1 )
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address :Obtain from MAIN MENU → [Network] → [Network status]
Port No. :Acquire from the WEB control...")
Technical Information ENGLISH - 83 Appendix When WEB Control administrator rights password is not set (Non-protect J mode) Connection method z Obtain the IP address and port number (Initial set value = 1 024) of the projector \ and 1 ) make a request for connection to the projector. Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address :Obtain from MAIN MENU → [Network] → [Network status] Port No. :Acquire from the WEB control...
Page 84
Technical Information 84 - ENGLISH Appendix Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector. JConnection JPin assignments and signal names D-Sub 9-pin (male) Outside viewPin No.Signal nameContents —NC RXDReceived data TXDTransmitted data —NC GNDEarth —NC —NC —NC —NC JCommunication conditions Signal...
Page 85
![Page 85
Technical Information
ENGLISH - 85
Appendix
JBasic format
Transmission from the computer begins with STX, then the command, paramet\
er, and ETX are sent in this
order. Add parameters according to the details of control.
STXC1C2C3 : P1 P2Pn ETX
When sending commands without parameters, a colon (:) is not necessary .:
JBasic format (with sub command)
STXC1C2C3 : ETX
S1S2S3S4S5 EP1P2P3P4P5P6
When transmitting a command which does not need a parameter, the operation (E) and parameter are not : ...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-84.png "Page 85
Technical Information
ENGLISH - 85
Appendix
JBasic format
Transmission from the computer begins with STX, then the command, paramet\
er, and ETX are sent in this
order. Add parameters according to the details of control.
STXC1C2C3 : P1 P2Pn ETX
When sending commands without parameters, a colon (:) is not necessary .:
JBasic format (with sub command)
STXC1C2C3 : ETX
S1S2S3S4S5 EP1P2P3P4P5P6
When transmitting a command which does not need a parameter, the operation (E) and parameter are not : ...")
Technical Information ENGLISH - 85 Appendix JBasic format Transmission from the computer begins with STX, then the command, paramet\ er, and ETX are sent in this order. Add parameters according to the details of control. STXC1C2C3 : P1 P2Pn ETX When sending commands without parameters, a colon (:) is not necessary .: JBasic format (with sub command) STXC1C2C3 : ETX S1S2S3S4S5 EP1P2P3P4P5P6 When transmitting a command which does not need a parameter, the operation (E) and parameter are not : ...
Page 86
![Page 86
Technical Information
86 - ENGLISH
Appendix
JCable specifications
[When connected to a computer]
Projector
1NCNC1
Computer (DTE
specifications)
22334NCNC45566778899
JControl commands
When controlling the projector from a computer, the following commands are available:
[Projector control command]
CommandControl contentsRemarks
PONPower [ON]
POFPower [OFF]
IISINPUT selection
(Parameter)
VID = Video
SVD = S-video
RG1 = Computer 1(RGB)
RG2 = Computer 2(RGB)
HD1 = HDMI
SCT = Computer 1(Scart)
OSHAV mute...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-85.png "Page 86
Technical Information
86 - ENGLISH
Appendix
JCable specifications
[When connected to a computer]
Projector
1NCNC1
Computer (DTE
specifications)
22334NCNC45566778899
JControl commands
When controlling the projector from a computer, the following commands are available:
[Projector control command]
CommandControl contentsRemarks
PONPower [ON]
POFPower [OFF]
IISINPUT selection
(Parameter)
VID = Video
SVD = S-video
RG1 = Computer 1(RGB)
RG2 = Computer 2(RGB)
HD1 = HDMI
SCT = Computer 1(Scart)
OSHAV mute...")
Technical Information 86 - ENGLISH Appendix JCable specifications [When connected to a computer] Projector 1NCNC1 Computer (DTE specifications) 22334NCNC45566778899 JControl commands When controlling the projector from a computer, the following commands are available: [Projector control command] CommandControl contentsRemarks PONPower [ON] POFPower [OFF] IISINPUT selection (Parameter) VID = Video SVD = S-video RG1 = Computer 1(RGB) RG2 = Computer 2(RGB) HD1 = HDMI SCT = Computer 1(Scart) OSHAV mute...
Page 87
Technical Information ENGLISH - 87 Appendix Other terminals Pin assignments and signal names of terminal J Outside viewPin No.Signal names GND (luminance signal) GND (color signal) Luminance signal Color signal Pin assignments and signal names of terminal Outside viewPin No.Signal names : Not assigned - , , : GND terminals R/PR G/G SYNC/Y B/PB + 5 V DDC data HD/SYNC VD DDC clock Pin assignments and signal names of J terminal Outside viewPin No.Signal names , , , , : Not assigned - , : GND...
Page 88
Technical Information 88 - ENGLISH Appendix List of compatible signals The following table specifies the types of signals compatible with the projectors. Format : V = VIDEO, S = S-VIDEO, C = COMPUTER, Y = YPBPR, H = HDMI Mode Display resolution *1 (dots) Scanning frequencyDot clock frequency (MHz) Picture quality *2PnP*3Format H (kHz)V (Hz) NTSC/NTSC 4.43/ PAL-M/PAL 60720 x 48015.759.9--AV/S PAL/PAL-N/SECAM720 x 57615.660.0--AV/S 480p640 x 48031.4759.8825.2A C/Y 480i640 x...
Page 89
Technical Information ENGLISH - 89 Appendix Mode Display resolution *1 (dots) Scanning frequencyDot clock frequency (MHz) Picture quality *2PnP*3Format H (kHz)V (Hz) SXGA+1 400 x 1 050 63.97060.190107.990A C 65.35060.120122.850A 65.12059.900122.430A XGA 1 024 x 768 48.3660.0065.00AA○ 68.67784.97794.504AA 60.02375.0378.75AA○ 56.47670.0775.00AA○ 60.3174.9279.252AA 48.5060.0265.179AA 44.0054.5859.129AA 63.4879.3583.41AA 62.0477.0784.375AA 61.0075.7081.00AA 46.9058.2063.03AA 47.0058.3061.664AA...
Page 90
Technical Information 90 - ENGLISH Appendix Mode Display resolution *1 (dots) Scanning frequencyDot clock frequency (MHz) Picture quality *2PnP*3Format H (kHz)V (Hz) WXGA 1 280 x 768 47.77659.87079.500A C 60.28974.893102.250A 68.63384.837117.500A 55.99369.99194.964A 57.67572.00497.817A 1 280 x 800 49.60060.05079.360A 41.20050.00068.557A 49.70259.81083.500A○ 63.98060.020108.000A 58.28969.97598.858A 60.04471.995102.795A 62.79074.928106.492A 71.55384.879122.498A 1 366 x 76848.3660.0086.67A 1 360 x...