Panasonic LCD Projector Pt Vx41 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Vx41 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
Network
ENGLISH - 61
Settings
Network connections
The projector has a network fuction, and the following operations are av\
ailable from the computer using the web
browser control.
Setting and adjustment of the projector. z
Display of the projector status. z
Transmission of an E-mail message when there is a problem with the projec\
tor. z
Note
A LAN cable is required to use the network function. z
ComputerProjector
LAN cable (straight) LAN cable (straight)
Hub
A Web browser is required to use this...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-60.png "Page 61
Network
ENGLISH - 61
Settings
Network connections
The projector has a network fuction, and the following operations are av\
ailable from the computer using the web
browser control.
Setting and adjustment of the projector. z
Display of the projector status. z
Transmission of an E-mail message when there is a problem with the projec\
tor. z
Note
A LAN cable is required to use the network function. z
ComputerProjector
LAN cable (straight) LAN cable (straight)
Hub
A Web browser is required to use this...")
Network ENGLISH - 61 Settings Network connections The projector has a network fuction, and the following operations are av\ ailable from the computer using the web browser control. Setting and adjustment of the projector. z Display of the projector status. z Transmission of an E-mail message when there is a problem with the projec\ tor. z Note A LAN cable is required to use the network function. z ComputerProjector LAN cable (straight) LAN cable (straight) Hub A Web browser is required to use this...
Page 62
Network 62 - ENGLISH Settings Computer operation Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing any settings. Turn on the computer.1 ) Make the network setting according to your system administrator.2 ) If the projector settings are the default settings (See page 59), the computer can be used with the following network settings. DHCPOff IP address1 9 2 .1 6 8 .1 0 .1 0 0 Subnet mask255.255.255.0 Default gateway1 9 2 .1 6 8 .1 0...
Page 63
Network
ENGLISH - 63
Settings
Description of each item J
1 Page selection tabs
Click these to switch pages.
2 Monitor information button
Click this item, and the status of the projector is
displayed.
3 Projector control button
Click this item to display the projector control
page.
4 Detailed set up button
Click this item to display the advanced settings
page.
5 Change password button
Click this button to display the password change
page.
6 Language switch button
Click this button to...
Page 64
![Page 64
Network
64 - ENGLISH
Settings
Error information page J
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen,
click the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.•
When [FAILED] has appeared for an item
ParameterDescription
FA NTrouble has occurred in the fan or its drive circuit. Consult your dealer.
INTAKE AIR...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-63.png "Page 64
Network
64 - ENGLISH
Settings
Error information page J
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen,
click the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.•
When [FAILED] has appeared for an item
ParameterDescription
FA NTrouble has occurred in the fan or its drive circuit. Consult your dealer.
INTAKE AIR...")
Network
64 - ENGLISH
Settings
Error information page J
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen,
click the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.•
When [FAILED] has appeared for an item
ParameterDescription
FA NTrouble has occurred in the fan or its drive circuit. Consult your dealer.
INTAKE AIR...
Page 65
![Page 65
Network
ENGLISH - 65
Settings
Network status page
J
Displays the current configuration information of the network.
Displays the configuration details of wired LAN.
Basic control page J
To move from another page, click [Projector control], then [Basic control].
1
Power standby/on control
2 Use these to select the input signals
3 Volume adjust
4 Switches image mode
5 Operation of AV mute
5
4
3
2
1
Detail control page J
Click [Projector control], then [Advanced control] to display the Detail control...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-64.png "Page 65
Network
ENGLISH - 65
Settings
Network status page
J
Displays the current configuration information of the network.
Displays the configuration details of wired LAN.
Basic control page J
To move from another page, click [Projector control], then [Basic control].
1
Power standby/on control
2 Use these to select the input signals
3 Volume adjust
4 Switches image mode
5 Operation of AV mute
5
4
3
2
1
Detail control page J
Click [Projector control], then [Advanced control] to display the Detail control...")
Network ENGLISH - 65 Settings Network status page J Displays the current configuration information of the network. Displays the configuration details of wired LAN. Basic control page J To move from another page, click [Projector control], then [Basic control]. 1 Power standby/on control 2 Use these to select the input signals 3 Volume adjust 4 Switches image mode 5 Operation of AV mute 5 4 3 2 1 Detail control page J Click [Projector control], then [Advanced control] to display the Detail control...
Page 66
![Page 66
Network
66 - ENGLISH
Settings
Network config page J
You can change network settings on projector when connecting with the administrator authority.
LAN settings z
Click [Detailed set up] in the menu.1 )
Click [Change] to change the LAN settings.2 )
To return to the previous window, click [Back]. z
Complete the detailed settings and 3 )
click [Next].
When [Next] is clicked, the next page appears, z
enabling you to complete the detailed settings
as desired. Settings performed here are the...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-65.png "Page 66
Network
66 - ENGLISH
Settings
Network config page J
You can change network settings on projector when connecting with the administrator authority.
LAN settings z
Click [Detailed set up] in the menu.1 )
Click [Change] to change the LAN settings.2 )
To return to the previous window, click [Back]. z
Complete the detailed settings and 3 )
click [Next].
When [Next] is clicked, the next page appears, z
enabling you to complete the detailed settings
as desired. Settings performed here are the...")
Network 66 - ENGLISH Settings Network config page J You can change network settings on projector when connecting with the administrator authority. LAN settings z Click [Detailed set up] in the menu.1 ) Click [Change] to change the LAN settings.2 ) To return to the previous window, click [Back]. z Complete the detailed settings and 3 ) click [Next]. When [Next] is clicked, the next page appears, z enabling you to complete the detailed settings as desired. Settings performed here are the...
Page 67
![Page 67
Network
ENGLISH - 67
Settings
Ping test page J
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was successful.
Display which appears when the connection
failed.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test.
21](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-66.png "Page 67
Network
ENGLISH - 67
Settings
Ping test page J
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was successful.
Display which appears when the connection
failed.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test.
21")
Network ENGLISH - 67 Settings Ping test page J This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS server, etc. Click [Detailed set up], then [Ping test] to display the Ping test page. Display which appears when the connection was successful. Display which appears when the connection failed. 1 Enter the IP address of the server to be tested. 2 Button for conducting the test. 21
Page 68
![Page 68
Network
68 - ENGLISH
Settings
E-mail set up page J
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be
sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
1 Select Enable to use the e-mail function.
2 Enter the IP address or server name of the e-mail
server (SMTP). The DNS server must be set if the
server name is entered.
3 Enter the e-mail...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-67.png "Page 68
Network
68 - ENGLISH
Settings
E-mail set up page J
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be
sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
1 Select Enable to use the e-mail function.
2 Enter the IP address or server name of the e-mail
server (SMTP). The DNS server must be set if the
server name is entered.
3 Enter the e-mail...")
Network 68 - ENGLISH Settings E-mail set up page J With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to one or more preset e-mail addresses (maximum two addresses). Click [Detailed set up], then [E-mail set up] to display the E-mail setup page. 1 Select Enable to use the e-mail function. 2 Enter the IP address or server name of the e-mail server (SMTP). The DNS server must be set if the server name is entered. 3 Enter the e-mail...
Page 69
![Page 69
Network
ENGLISH - 69
Settings
E-mail set up page (continued) J
9 Enter the E-mail Address2 of your desired recipient.
10 Select the conditions for sending e-mail.
MAIL CONTENTS:Select [NORMAL] or [SIMPLE].
ERROR:An error is detected by self-diagnosis.
LAMP RUNTIME:Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE:Intake air temperature has reached the value set in the field.
10
9
Authentication set up page J
The POP/SMTP server is set on this page when...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-68.png "Page 69
Network
ENGLISH - 69
Settings
E-mail set up page (continued) J
9 Enter the E-mail Address2 of your desired recipient.
10 Select the conditions for sending e-mail.
MAIL CONTENTS:Select [NORMAL] or [SIMPLE].
ERROR:An error is detected by self-diagnosis.
LAMP RUNTIME:Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE:Intake air temperature has reached the value set in the field.
10
9
Authentication set up page J
The POP/SMTP server is set on this page when...")
Network
ENGLISH - 69
Settings
E-mail set up page (continued) J
9 Enter the E-mail Address2 of your desired recipient.
10 Select the conditions for sending e-mail.
MAIL CONTENTS:Select [NORMAL] or [SIMPLE].
ERROR:An error is detected by self-diagnosis.
LAMP RUNTIME:Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE:Intake air temperature has reached the value set in the field.
10
9
Authentication set up page J
The POP/SMTP server is set on this page when...
Page 70
![Page 70
Network
70 - ENGLISH
Settings
Contents of mail sent J
Mail with the contents shown below is sent when the e-mail settings have\
z
been established.
=== Panasonic projector report(CONFIGURE) ===Projector Type : PT-VX41Serial No : 123456789----- E-mail setup data -----TEMPERATURE WARNING SETUP MINIMUM TIME at [ 30] minutes interval INTAKE AIR TEMPERATURE Over [ 32degC / 89degF ]
ERROR [ OFF ] LAMP RUNTIME [ OFF ] at REMAIN [ 0] H LAMP...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-69.png "Page 70
Network
70 - ENGLISH
Settings
Contents of mail sent J
Mail with the contents shown below is sent when the e-mail settings have\
z
been established.
=== Panasonic projector report(CONFIGURE) ===Projector Type : PT-VX41Serial No : 123456789----- E-mail setup data -----TEMPERATURE WARNING SETUP MINIMUM TIME at [ 30] minutes interval INTAKE AIR TEMPERATURE Over [ 32degC / 89degF ]
ERROR [ OFF ] LAMP RUNTIME [ OFF ] at REMAIN [ 0] H LAMP...")
Network 70 - ENGLISH Settings Contents of mail sent J Mail with the contents shown below is sent when the e-mail settings have\ z been established. === Panasonic projector report(CONFIGURE) ===Projector Type : PT-VX41Serial No : 123456789----- E-mail setup data -----TEMPERATURE WARNING SETUP MINIMUM TIME at [ 30] minutes interval INTAKE AIR TEMPERATURE Over [ 32degC / 89degF ] ERROR [ OFF ] LAMP RUNTIME [ OFF ] at REMAIN [ 0] H LAMP...