Panasonic LCD Projector Pt Vx41 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Vx41 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
Network
ENGLISH - 71
Settings
Mail with the contents shown below is sent when an error has occurred. z
Command port set up page J
Set the port number to be used with command control.
Click [Detailed set up] → [Command port set up].
1 Input the port number to be used with command control
2 Setting update button
1
2
=== Panasonic projector report(ERROR) ===Projector Type : PT-VX41Serial No : 123456789----- check system -----FAN [ OK ]INTAKE AIR...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-70.png "Page 71
Network
ENGLISH - 71
Settings
Mail with the contents shown below is sent when an error has occurred. z
Command port set up page J
Set the port number to be used with command control.
Click [Detailed set up] → [Command port set up].
1 Input the port number to be used with command control
2 Setting update button
1
2
=== Panasonic projector report(ERROR) ===Projector Type : PT-VX41Serial No : 123456789----- check system -----FAN [ OK ]INTAKE AIR...")
Network ENGLISH - 71 Settings Mail with the contents shown below is sent when an error has occurred. z Command port set up page J Set the port number to be used with command control. Click [Detailed set up] → [Command port set up]. 1 Input the port number to be used with command control 2 Setting update button 1 2 === Panasonic projector report(ERROR) ===Projector Type : PT-VX41Serial No : 123456789----- check system -----FAN [ OK ]INTAKE AIR...
Page 72
![Page 72
Network
72 - ENGLISH
Settings
Change Password page J
Click [Change password].
1 Administrator
2 User
Administrator mode
1 Account
2 Current user name input field
3 Current password input field
4 New user name input field
5 New password input field
6 New password input field (re-enter for confirmation)
7 Button for executing password change
User account
1 Account
2 New user name input field
3 New password input field
4 New password input field (re-enter for confirmation)
5 Button for executing...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-71.png "Page 72
Network
72 - ENGLISH
Settings
Change Password page J
Click [Change password].
1 Administrator
2 User
Administrator mode
1 Account
2 Current user name input field
3 Current password input field
4 New user name input field
5 New password input field
6 New password input field (re-enter for confirmation)
7 Button for executing password change
User account
1 Account
2 New user name input field
3 New password input field
4 New password input field (re-enter for confirmation)
5 Button for executing...")
Network 72 - ENGLISH Settings Change Password page J Click [Change password]. 1 Administrator 2 User Administrator mode 1 Account 2 Current user name input field 3 Current password input field 4 New user name input field 5 New password input field 6 New password input field (re-enter for confirmation) 7 Button for executing password change User account 1 Account 2 New user name input field 3 New password input field 4 New password input field (re-enter for confirmation) 5 Button for executing...
Page 73
![Page 73
LAMP REPLACE and WARNING Indicators
ENGLISH - 73
Maintenance
LAMP REPLACE and WARNING Indicators
Managing the indicated problems
If a problem should occur inside the projector, the , and/or indicators
will inform you. Manage the indicated problems as follow.
CAUTION
Before you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”. z
(Æpage 29)
If multiple indicators light or blink, verify the status of the projecto\
r by looking at each...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-72.png "Page 73
LAMP REPLACE and WARNING Indicators
ENGLISH - 73
Maintenance
LAMP REPLACE and WARNING Indicators
Managing the indicated problems
If a problem should occur inside the projector, the , and/or indicators
will inform you. Manage the indicated problems as follow.
CAUTION
Before you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”. z
(Æpage 29)
If multiple indicators light or blink, verify the status of the projecto\
r by looking at each...")
LAMP REPLACE and WARNING Indicators ENGLISH - 73 Maintenance LAMP REPLACE and WARNING Indicators Managing the indicated problems If a problem should occur inside the projector, the , and/or indicators will inform you. Manage the indicated problems as follow. CAUTION Before you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”. z (Æpage 29) If multiple indicators light or blink, verify the status of the projecto\ r by looking at each...
Page 74
![Page 74
74 - ENGLISH
Maintenance
Replacement
Before replacing the unit
When you perform maintenance or replacement of the parts, make sure to t\
urn off the power and disconnect z
the power plug from the wall outlet. (Æpages 25, 29)
Be sure to observe the procedure “Turning off the projector” ( zÆpage 29) when performing power supply
operation.
Maintenance
Outer Case J
Wipe off dirt and dust using a soft dry cloth.
If the dirt is persistent, soak the cloth with water and wring it thorou\
ghly before wiping....](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-73.png "Page 74
74 - ENGLISH
Maintenance
Replacement
Before replacing the unit
When you perform maintenance or replacement of the parts, make sure to t\
urn off the power and disconnect z
the power plug from the wall outlet. (Æpages 25, 29)
Be sure to observe the procedure “Turning off the projector” ( zÆpage 29) when performing power supply
operation.
Maintenance
Outer Case J
Wipe off dirt and dust using a soft dry cloth.
If the dirt is persistent, soak the cloth with water and wring it thorou\
ghly before wiping....")
74 - ENGLISH Maintenance Replacement Before replacing the unit When you perform maintenance or replacement of the parts, make sure to t\ urn off the power and disconnect z the power plug from the wall outlet. (Æpages 25, 29) Be sure to observe the procedure “Turning off the projector” ( zÆpage 29) when performing power supply operation. Maintenance Outer Case J Wipe off dirt and dust using a soft dry cloth. If the dirt is persistent, soak the cloth with water and wring it thorou\ ghly before wiping....
Page 75
Replacement ENGLISH - 75 Maintenance Replace the air filter units.2 ) Put new air filter units back into the position. Make sure that the filters are fully inserted to the projector. z Resetting the Filter Counter J Be sure to reset the Filter counter after replacing the air filter units. (Æpage 57" Filter counter reset") Attention Turn off the power before you replace the air filter units. z When attaching the air filter units, make sure that the projector is stable, and work in an...
Page 76
![Page 76
Replacement
76 - ENGLISH
Maintenance
JLamp unit
The lamp unit is a consumable component. You can check the total usage time using Lamp runtime in the
Information menu on page 58.
It is recommended to ask an authorized engineer to replace the lamp unit\
. Contact your dealer.
Consult your dealer to purchase a replacement lamp unit (ET-LAV100).
CAUTION:
■ Do not replace the lamp unit when it is hot. (Wait at least 45 minutes after use.)
The inside of the cover can become very hot, take care to avoid burn...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-75.png "Page 76
Replacement
76 - ENGLISH
Maintenance
JLamp unit
The lamp unit is a consumable component. You can check the total usage time using Lamp runtime in the
Information menu on page 58.
It is recommended to ask an authorized engineer to replace the lamp unit\
. Contact your dealer.
Consult your dealer to purchase a replacement lamp unit (ET-LAV100).
CAUTION:
■ Do not replace the lamp unit when it is hot. (Wait at least 45 minutes after use.)
The inside of the cover can become very hot, take care to avoid burn...")
Replacement 76 - ENGLISH Maintenance JLamp unit The lamp unit is a consumable component. You can check the total usage time using Lamp runtime in the Information menu on page 58. It is recommended to ask an authorized engineer to replace the lamp unit\ . Contact your dealer. Consult your dealer to purchase a replacement lamp unit (ET-LAV100). CAUTION: ■ Do not replace the lamp unit when it is hot. (Wait at least 45 minutes after use.) The inside of the cover can become very hot, take care to avoid burn...
Page 77
![Page 77
Replacement
ENGLISH - 77
Maintenance
JReplacing the Lamp unit
CAUTION:
When the projector is mounted on a ceiling, do not work with your face c\
lose to the projector. z
Attach the lamp unit and the lamp cover securely. z
When you experience difficulty in installing the lamp, remove it and try again. If you use force to install the z
lamp, the connector may be damaged.
Turn off the Power by following the procedure 1 )
in “Turning off the projector (Æpage 29)”.
Unplug the AC...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-76.png "Page 77
Replacement
ENGLISH - 77
Maintenance
JReplacing the Lamp unit
CAUTION:
When the projector is mounted on a ceiling, do not work with your face c\
lose to the projector. z
Attach the lamp unit and the lamp cover securely. z
When you experience difficulty in installing the lamp, remove it and try again. If you use force to install the z
lamp, the connector may be damaged.
Turn off the Power by following the procedure 1 )
in “Turning off the projector (Æpage 29)”.
Unplug the AC...")
Replacement ENGLISH - 77 Maintenance JReplacing the Lamp unit CAUTION: When the projector is mounted on a ceiling, do not work with your face c\ lose to the projector. z Attach the lamp unit and the lamp cover securely. z When you experience difficulty in installing the lamp, remove it and try again. If you use force to install the z lamp, the connector may be damaged. Turn off the Power by following the procedure 1 ) in “Turning off the projector (Æpage 29)”. Unplug the AC...
Page 78
![Page 78
Replacement
78 - ENGLISH
Maintenance
Attaching the Lens Cap
When moving this projector or while not using it over an extended period\
of time, attach the lens cap.
Attach the lens cap according to the following procedures.
Thread the string (supplied) through 1 )
the hole on the lens cap.
Push the other end of the string into 2 )
the front part of the hook (as the
picture shown) on the bottom of the
projector.](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-77.png "Page 78
Replacement
78 - ENGLISH
Maintenance
Attaching the Lens Cap
When moving this projector or while not using it over an extended period\
of time, attach the lens cap.
Attach the lens cap according to the following procedures.
Thread the string (supplied) through 1 )
the hole on the lens cap.
Push the other end of the string into 2 )
the front part of the hook (as the
picture shown) on the bottom of the
projector.")
Replacement 78 - ENGLISH Maintenance Attaching the Lens Cap When moving this projector or while not using it over an extended period\ of time, attach the lens cap. Attach the lens cap according to the following procedures. Thread the string (supplied) through 1 ) the hole on the lens cap. Push the other end of the string into 2 ) the front part of the hook (as the picture shown) on the bottom of the projector.
Page 79
![Page 79
ENGLISH - 79
Maintenance
Troubleshooting
Please check following points. For details, see the corresponding pages.\
ProblemCauseReference
page
Power does not turn
on.
The power cord may not be connected. z—
No electric supply is at the wall outlet. z—
The circuit breakers have tripped. z—
I zs the indicator, indicator, or
indicator lit or blinking?
26, 73
The lamp cover has not been securely installed. z77
No picture appears.
The video signal input source may not be connected to a terminal z...](http://img.usermanuals.tech/thumb/58/76018/w300_pt-vx41_en_om_d-78.png "Page 79
ENGLISH - 79
Maintenance
Troubleshooting
Please check following points. For details, see the corresponding pages.\
ProblemCauseReference
page
Power does not turn
on.
The power cord may not be connected. z—
No electric supply is at the wall outlet. z—
The circuit breakers have tripped. z—
I zs the indicator, indicator, or
indicator lit or blinking?
26, 73
The lamp cover has not been securely installed. z77
No picture appears.
The video signal input source may not be connected to a terminal z...")
ENGLISH - 79 Maintenance Troubleshooting Please check following points. For details, see the corresponding pages.\ ProblemCauseReference page Power does not turn on. The power cord may not be connected. z— No electric supply is at the wall outlet. z— The circuit breakers have tripped. z— I zs the indicator, indicator, or indicator lit or blinking? 26, 73 The lamp cover has not been securely installed. z77 No picture appears. The video signal input source may not be connected to a terminal z...
Page 80
Troubleshooting 80 - ENGLISH Maintenance ProblemCauseReference page Picture from a HDMI device does not appear or picture is not stable. Is the HDMI cable securely connected? z24 Turn off the power of the projector and the connected devices. Then turn z the power of the projector and the connected devices back on. — Isn't unsupported signal cable connected? z88-91 No sound is output from a HDMI device. Set the sound channel of the attached device to Linear PCM. z— If no audio signal is output...