Panasonic LCD Projector Pt Vw330 Network Operations Manual
Here you can view all the pages of manual Panasonic LCD Projector Pt Vw330 Network Operations Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
21
Using Web Browser (continued)
Mail with the contents shown below is sent when an error has occurred.
Command port set up page
Set the port number to be used with command control.
Click [Detailed set up] → [Command port set up].
1 Input the port number to be used with command control
2 Setting update button
1
2](http://img.usermanuals.tech/thumb/58/76000/w300_pt-vw330_en_network_om_d-20.png "Page 21
21
Using Web Browser (continued)
Mail with the contents shown below is sent when an error has occurred.
Command port set up page
Set the port number to be used with command control.
Click [Detailed set up] → [Command port set up].
1 Input the port number to be used with command control
2 Setting update button
1
2")
21 Using Web Browser (continued) Mail with the contents shown below is sent when an error has occurred. Command port set up page Set the port number to be used with command control. Click [Detailed set up] → [Command port set up]. 1 Input the port number to be used with command control 2 Setting update button 1 2
Page 22
22 PJLink protocol The network function of the projector supports PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer. Control commands The following table lists the PJLink protocol commands that can be used to control the projector. CommandControl detailsNotes POWRPower supply control Parameters 0 = Standby 1 = Power ON POWR ?Power supply status query Parameters 0 = Standby 1 = Power ON 2 = Cool-down in progress...
Page 23
![Page 23
23
Control commands via LAN
When WEB Control administrator rights password is set (Protect mode)
Connection method
Obtain the IP address and port number (Initial set value = 1024) of the projector and 1)
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address :Obtain from MAIN MENU → [Network] → [Network status]
Port No. :Acquire from the WEB control “Detailed set up ” → “Command port set up”...](http://img.usermanuals.tech/thumb/58/76000/w300_pt-vw330_en_network_om_d-22.png "Page 23
23
Control commands via LAN
When WEB Control administrator rights password is set (Protect mode)
Connection method
Obtain the IP address and port number (Initial set value = 1024) of the projector and 1)
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address :Obtain from MAIN MENU → [Network] → [Network status]
Port No. :Acquire from the WEB control “Detailed set up ” → “Command port set up”...")
23 Control commands via LAN When WEB Control administrator rights password is set (Protect mode) Connection method Obtain the IP address and port number (Initial set value = 1024) of the projector and 1) make a request for connection to the projector. Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address :Obtain from MAIN MENU → [Network] → [Network status] Port No. :Acquire from the WEB control “Detailed set up ” → “Command port set up”...
Page 24
![Page 24
24
Control commands via LAN (continued)
When WEB Control administrator rights password is not set (Non-protect mode)
Connection method
Obtain the IP address and port number (Initial set value = 1024) of the projector and 1)
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address :Obtain from MAIN MENU → [Network] → [Network status]
Port No. :Acquire from the WEB control “Detailed set up” →...](http://img.usermanuals.tech/thumb/58/76000/w300_pt-vw330_en_network_om_d-23.png "Page 24
24
Control commands via LAN (continued)
When WEB Control administrator rights password is not set (Non-protect mode)
Connection method
Obtain the IP address and port number (Initial set value = 1024) of the projector and 1)
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address :Obtain from MAIN MENU → [Network] → [Network status]
Port No. :Acquire from the WEB control “Detailed set up” →...")
24 Control commands via LAN (continued) When WEB Control administrator rights password is not set (Non-protect mode) Connection method Obtain the IP address and port number (Initial set value = 1024) of the projector and 1) make a request for connection to the projector. Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address :Obtain from MAIN MENU → [Network] → [Network status] Port No. :Acquire from the WEB control “Detailed set up” →...
Page 25
25 Glossary ItemDescriptionsSee page DNSAbbreviation for Domain name system. This function sets IP address of the DNS server. 7 10 DHCPAbbreviation for Dynamic Host Configuration Protocol. This function automatically assigns IP addresses to the connected equipment. If a device with the DHCP server function is present within a LAN, it automatically assigns IP addresses to the connected equipment 7 10 Default gatewayThe devices that are used for different network standards from yours. Default Gateway...
Page 26
0ñ1111111 10Á0ä11111111 11 Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 201 1 S S 0 8 11 - 0