Panasonic LCD Projector Pt Vw330 Network Operations Manual

11
Using Web Browser
Accessing from the Web browser
Activate the Web browser in the personal computer.1 
Enter the IP address set by the projector into the URL input field of the Web 2 b r ow s e r.
Enter your “User name” and “Password”.3 
The factory default settings are user1 (user 
privileges) or admin1 (administrator privileges) for 
the use name and panasonic (lowercase letters) for 
the password.
Click [OK] to display the Projector status 4 page.
“Projector status” page is displayed.
Avoid...

12
Using Web Browser (continued)
 Description of each item 
1 Page selection tabs
  Click these to switch pages.
2 Monitor information button 
Click this item, and the status of the projector is 
displayed.
3 Projector control button 
Click this item to display the projector control 
page.
4 Detailed set up button 
Click this item to display the advanced settings 
page.
5 Change password button
    Click this button to display the password change 
page.
6  Language switch button
    Click this button to...

13
Using Web Browser (continued)
Error information page
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, click 
the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.• 
 When [FAILED] has appeared for an item
ParameterDescription
FA NTrouble has occurred in the fan or its drive circuit. Consult your dealer.
INTAKE AIR TEMPER ATURE
Intake...

14
Using Web Browser (continued)
Basic control page
To move from another page, click [Projector control], then [Basic control].
1 Power standby/on control
2 Use these to select the input signals
3 Volume adjust
4 Switches image mode
5 Operation of AV mute
5
4
3
2
1
Detail control page
Click [Projector control], then [Advanced control] to display the Detail control page.
1  Execute Auto setup function
2 Operations on Screen mode
3  Operations on Keystone function
4  Operations on Rear/Ceiling
5...

15
Using Web Browser (continued)
Change Password page
Click [Change password].
1 Administrator
2 User
 Administrator mode
1 Account
2 Current user name input field
3 Current password input field
4 New user name input field
5 New password input field
6 New password input field (re-enter for confirmation)
7 Button for executing password change
 User account
1 Account
2 New user name input field
3 New password input field
4 New password input field (re-enter for confirmation)
5 Button for executing...

16
Using Web Browser (continued)
Network config page
 LAN settings 
    You can make detailed wired LAN settings.
Click [Detailed set up] in the menu.1 
Click [Change] to change the LAN settings.2       
To return to the previous window, click [Back].
Complete the detailed settings and click 3 [Next].
When [Next] is clicked, the next page appears, enabling 
you to complete the detailed settings as desired.
Settings performed here are the same as the settings 
performed with the [Network] menu of the...

17
Using Web Browser (continued)
Ping test page
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS 
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was successful.
Display which appears when the connection
failed.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test.
21 

18
Using Web Browser (continued)
E-mail setup page
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be 
sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
1 Select Enable to use the e-mail function.
2 Enter the IP address or server name of the e-mail 
server (SMTP). The DNS server must be set if the 
server name is entered.
3 Enter the e-mail...

19
Using Web Browser (continued)
E-mail setup page (continued)
1 Enter the E-mail Address2 of your desired recipient.
2 Select the conditions for sending e-mail.
     MAIL CONTENTS:Select [NORMAL] or [SIMPLE].
ERROR:An error is detected by self-diagnosis.
LAMP RUNTIME:Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE:Intake air temperature has reached the value set in the field.
2
1
Authentication set up page
The POP/SMTP server is set on this page when POP/SMTP...

20
Using Web Browser (continued)
Contents of mail sent   
 Mail with the contents shown below is sent when the e-mail settings have been established.